Land Pride Z52, Z60 Control Levers, Deck Height Deck Lift Locking Pin, Blade Engagement Switch

Page 16

Land Pride

Section 2 Operation

Left/Right Fuel Tank Valve

Refer to Figure 2-3:

The mower is equipped with a Left/Right Fuel Tank Valve that will determine which fuel tank the mower is operating from. It is not important which fuel tank the mower is using.

Left/Right Fuel Tank Switch

Figure 2-3

Blade Engagement Switch

Refer to Figure 2-2:

This switch engages the deck blades. Pull the switch up to engage and push switch down to disengage the clutch.

IMPORTANT: Never engage clutch with engine running at high rpm or when the deck is under load. Clutch, belts or deck could be damaged.

Control Levers

Parking Brake

The Parking Brakes are applied by moving the control levers from the Neutral Position (Figure 2-5) to an outward position (Refer to Figure 2-4).Each rear wheel brake operates independently of the other.

!WARNING!

In the event of a system failure while mowing, engage both parking brakes to stop or slow mower. Refer to Figure 2-4.

Refer to Figure 2-5:

These levers control the mower’s speed, direction, neutral lock and park brake. Levers are used to steer, accelerate, brake and change direction. The mower will not move when the engine is on, drive pumps are operating and the control levers are in the park brake position (out)

Figure 2-4.

Control Levers

Control Levers

19060

Figure 2-5

!WARNING!

The parking brake is not designed to hold the mower on steep slopes.

Deck Lift Pedal

Refer to Figure 2-6:

The deck lift pedal is used to raise or lower the deck. Push on the pedal to raise the deck and then place the deck height locking pin into the desired cutting height hole.

Push the deck lift pedal to raise the deck when going over obstructions.

Deck Height

 

Deck Lift

Locking Pin

Pedal

 

 

Control Levers in Parking Brake Position

19698

 

Deck Lift Pedal

 

Figure 2-4

19061

 

Figure 2-6

 

14 Z52®, Z60® & Z72® Zero Turning Radius Mowers Accu-Z 356-005M

03/11/03

Image 16
Contents Accu-Z Table of Contents Be Aware of Signal Words Keep Riders Off MachineryFor Your Protection Shutdown and StoragePractice Safe Maintenance Safety at All TimesWear Protective Equipment Prepare for EmergenciesAvoid High Pressure Fluids Hazard Important Safety Information 838-303C838-307C 838-308C 838-310C 838-399CUsing This Manual ApplicationOwner Assistance IntroductionRemote Air Cleaner Assembly Control Lever and Seat AssemblyAssembly and Set-Up Optional Equipment Assemblies Remote Air Cleaner AssemblyControl Lever Extensions Accu-Vac Assembly Mower Deck PreparationBlower, Pulley and Pulley Cover Assembly Blower Drive BeltBagger Assembly Bagger Assembly Ignition Switch ControlsOperation Throttle ControlBlade Engagement Switch Control LeversDeck Height Deck Lift Locking Pin Control LeversSafety Start Interlock System InstrumentationEngine Starting Hour MeterMoving Mower with Stalled Engine Front of mower Faces This DirectionDriving the Mower Operating SuggestionsSteering To Stop or Decrease SpeedMower Deck Operation Operating Instructions Adjustments Torque ValuesSteering Linkage Control Lever Park Brake SlotJam Nut Control Lever Neutral AdjustmentStop Control Lever Reverse Spring Adjustment Control Lever StopsTop Nylock Nut Reverse Spring Nylock Nut LinkagePark Brake Adjustment Control Lever AdjustmentSteering Dampener Steering Dampener Upper Control Lever Cap Screw LowerFront Brake Link Right Side Control Lever Park Brake Slot Outside Edge Travel SlotBy-Pass Valve Jam Nut Brake Linkage TurnbuckleHydraulic Pump Belt Adjustment Deck Drive Belt AdjustmentEngine RPM Setting Deck Leveling and Height AdjustmentDeck Level Adjustments Stop Handle Height Adjusting BlocksDeck Lift Threaded Rod Nut Nut Chain Deck Lift Threaded Rod Foot Pedal Nut Nut Chain Bolt Adjuster Jam Nut HardwareLift Block Deck Lift Rod Assist Springs Deck Cutting Height Adjustment Height Adjusting Stop PlateAnti-Scalp Rollers Adjusting Holes Anti-Scalp RollersMaintenance and Lubrication Top View Deck Top View Bottom ViewMaintenance Schedule Maintenance Refer to Tire Inflation ChartTires Torque ValuesHour Meter BatteryLubrication Electrical System Access to Engine and Hydraulic Pumps Hydraulic SystemSeat Platform Seat Platform Catch Control Lever Hydraulic Reservoir Hydraulic FilterEngine Oil and Filter Fuel SystemFuel Filter Improper Installation Engine Air FilterEngine Oil Filler Tube Oil Filter Drain Plug Over ServicingEngine Air Filter Service Procedure General Engine MaintenanceDamaged Filter, Seals or Canister Incorrect Air Filter ElementBelt Replacement Mower Blade MaintenanceMower Blade Removal Lift Jack OptionPreparation of Engine for Storage New Season PreparationSpecifications and Capacities Safety Features IndicatorsWeight Kit ParkingFeatures and Benefits 52, 60 or 72 Cutting widthTroubleshooting Tire Inflation Chart AppendixTire Inflation PSIWarranty Corporate Office P.O. Box Salina, Kansas 67402-5060 USA
Related manuals
Manual 6 pages 11.76 Kb

Z60, Z52, Z52 , Z60, Z72 specifications

Land Pride is a recognized leader in the manufacturing of high-quality outdoor equipment, particularly known for their commercial mowers. Among their lineup, models like the ZXT54, ZT60, Z52, Z44, and ZT72 stand out for their commitment to performance, durability, and ease of use. These zero-turn mowers are designed to tackle a variety of mowing tasks, making them ideal for both residential and commercial applications.

The Land Pride ZXT54 model features a 54-inch cutting deck, which provides ample width for efficient mowing. Its powerful engine, designed for reliability and performance, ensures that grass can be cut cleanly and quickly, even in challenging conditions. Users appreciate the intuitive controls that allow for precise maneuvering, making it easy to navigate around obstacles like trees and flower beds. The ZXT54 also includes features such as a comfortable seat and ergonomic handle grips, enhancing operator comfort during extended use.

Moving to the ZT60, this model takes it a step further with a 60-inch cutting deck. This increased size makes it ideal for large lawns or commercial properties, allowing more area to be covered in less time. The ZT60 is equipped with advanced mowing technology that ensures an even cut and a clean finish. An adjustable cutting height gives users the flexibility to adapt to different grass types and growth conditions.

The Z52 model is another solid option for users looking for a balance between power and maneuverability. With a 52-inch cutting deck, this model is favored for its agility in tighter spaces while still providing a robust mowing performance. The Z52 boasts some of the latest technological advancements, including a heavy-duty chassis and an efficient engine that prolongs work time and reduces wear.

For smaller properties, the Z44 model shines with its 44-inch deck, making it perfect for navigating narrow spaces without compromising on cutting performance. Its compact size does not sacrifice power, as it is outfitted with a capable engine that can handle various grass types while providing a reliable performance.

Finally, the ZT72 model, with its impressive 72-inch cutting deck, is engineered specifically for extensive commercial use. It is built to withstand demanding conditions, featuring heavy-duty components that ensure longevity. The ZT72 also includes advanced features like an enhanced mulching option and a robust suspension system, providing a smooth ride over uneven terrain.

In summary, the Land Pride ZXT54, ZT60, Z52, Z44, and ZT72 models each offer unique features tailored to meet the varying needs of users. Whether for residential use or commercial applications, these mowers deliver power, efficiency, and unmatched comfort, ensuring that mowing tasks are completed effectively and with ease.