Land Pride Z52 , Z60, Z72 manual Hydraulic Pump Belt Adjustment, Deck Drive Belt Adjustment

Page 27

Land Pride

Section 3 Adjustments

8.Rotate the tire and at the same time rotate the turnbuckle to shorten the length of the brake linkage to increase the brake pressure. When you feel the brake begin to engage, stop adjusting the turnbuckle. Re- tighten the jam nuts on the turnbuckle.

9.Place the control lever in the park brake slot. Refer to Figure 3-9. The tire should not rotate when the control lever is in the park brake position.

10.Place the control lever in the neutral position. The tire should rotate freely.

11.Close the hydraulic pump’s bypass valve.

12.Repeat steps 3 thru 11 for the other side.

13.Remove from the jack stands and lower the unit. It is now ready to operate.

Hydraulic Pump Belt Adjustment

Refer to Figure 3-11.

The pump drive belt tension remains constant by means of a tension idler and spring. There is no tension adjustment of this belt.

Spring

Pump Drive

Belt

link(s) at the anchor bracket (Figure 3-12). Installed spring length should be 9" + or - 3/8" originally with adjustments of 5/8" per chain link.

Spring

Chain

Anchor

Bracket

Tension

Idler

Drive Belt Adjustment

19087

Figure 3-12

 

IMPORTANT: Do not over tension the spring to compensate for a badly worn belt or pulley.

Tension

Idler

Pump Belt Adjustment

Figure 3-11

19086

Spring Tension

19091

Figure 3-13

 

Deck Drive Belt Adjustment

Refer to Figure 3-12:

The spindle belt tension remains constant by means of a tension idler and spring.

The spring tension should be such that the belt does not slip under normal operating load conditions, assuming the belt is not excessively worn or damaged. As belt stretches and wears in, adjustment may become necessary. To increase belt tension, move the spring chain one (or more)

Engine RPM Setting

The Accu Z is designed so that the engine will run at 3600 rpm static pump load only. At this speed the hydraulic pumps are running at their maximum rated speed.

Deck Leveling and Height Adjustment

The mower deck has three areas that may need to be checked and adjusted periodically. Before considering any mower deck leveling adjustments, check that the tire air pressure is within the specified range.

03/11/03

Z52®, Z60® & Z72® Zero Turning Radius Mowers Accu-Z 356-005M

25

Image 27
Contents Accu-Z Table of Contents Shutdown and Storage Be Aware of Signal WordsKeep Riders Off Machinery For Your ProtectionSafety at All Times Practice Safe MaintenancePrepare for Emergencies Wear Protective EquipmentAvoid High Pressure Fluids Hazard 838-303C Important Safety Information838-399C 838-307C 838-308C 838-310CIntroduction Using This ManualApplication Owner AssistanceControl Lever and Seat Assembly Remote Air Cleaner AssemblyAssembly and Set-Up Remote Air Cleaner Assembly Optional Equipment AssembliesControl Lever Extensions Mower Deck Preparation Accu-Vac AssemblyBlower Drive Belt Blower, Pulley and Pulley Cover AssemblyBagger Assembly Bagger Assembly Throttle Control Ignition SwitchControls OperationControl Levers Blade Engagement SwitchControl Levers Deck Height Deck Lift Locking PinHour Meter Safety Start Interlock SystemInstrumentation Engine StartingFront of mower Faces This Direction Moving Mower with Stalled EngineTo Stop or Decrease Speed Driving the MowerOperating Suggestions SteeringMower Deck Operation Operating Instructions Control Lever Park Brake Slot AdjustmentsTorque Values Steering LinkageControl Lever Neutral Adjustment Jam NutStop Control Lever Nylock Nut Linkage Reverse Spring AdjustmentControl Lever Stops Top Nylock Nut Reverse SpringSteering Dampener Upper Control Lever Cap Screw Lower Park Brake AdjustmentControl Lever Adjustment Steering DampenerBrake Linkage Turnbuckle Front Brake Link Right SideControl Lever Park Brake Slot Outside Edge Travel Slot By-Pass Valve Jam NutDeck Leveling and Height Adjustment Hydraulic Pump Belt AdjustmentDeck Drive Belt Adjustment Engine RPM SettingStop Handle Height Adjusting Blocks Deck Level AdjustmentsDeck Lift Threaded Rod Nut Nut Chain Bolt Adjuster Jam Nut Hardware Deck Lift Threaded Rod Foot Pedal Nut Nut ChainLift Block Deck Lift Rod Assist Springs Height Adjusting Stop Plate Deck Cutting Height AdjustmentAnti-Scalp Rollers Anti-Scalp Rollers Adjusting HolesTop View Deck Top View Bottom View Maintenance and LubricationMaintenance Schedule Torque Values MaintenanceRefer to Tire Inflation Chart TiresBattery Hour MeterLubrication Electrical System Hydraulic Reservoir Hydraulic Filter Access to Engine and Hydraulic PumpsHydraulic System Seat Platform Seat Platform Catch Control LeverFuel System Engine Oil and FilterFuel Filter Over Servicing Improper InstallationEngine Air Filter Engine Oil Filler Tube Oil Filter Drain PlugIncorrect Air Filter Element Engine Air Filter Service ProcedureGeneral Engine Maintenance Damaged Filter, Seals or CanisterLift Jack Option Belt ReplacementMower Blade Maintenance Mower Blade RemovalNew Season Preparation Preparation of Engine for StorageSpecifications and Capacities Parking Safety FeaturesIndicators Weight Kit52, 60 or 72 Cutting width Features and BenefitsTroubleshooting Inflation PSI Tire Inflation ChartAppendix TireWarranty Corporate Office P.O. Box Salina, Kansas 67402-5060 USA
Related manuals
Manual 6 pages 11.76 Kb

Z60, Z52, Z52 , Z60, Z72 specifications

Land Pride is a recognized leader in the manufacturing of high-quality outdoor equipment, particularly known for their commercial mowers. Among their lineup, models like the ZXT54, ZT60, Z52, Z44, and ZT72 stand out for their commitment to performance, durability, and ease of use. These zero-turn mowers are designed to tackle a variety of mowing tasks, making them ideal for both residential and commercial applications.

The Land Pride ZXT54 model features a 54-inch cutting deck, which provides ample width for efficient mowing. Its powerful engine, designed for reliability and performance, ensures that grass can be cut cleanly and quickly, even in challenging conditions. Users appreciate the intuitive controls that allow for precise maneuvering, making it easy to navigate around obstacles like trees and flower beds. The ZXT54 also includes features such as a comfortable seat and ergonomic handle grips, enhancing operator comfort during extended use.

Moving to the ZT60, this model takes it a step further with a 60-inch cutting deck. This increased size makes it ideal for large lawns or commercial properties, allowing more area to be covered in less time. The ZT60 is equipped with advanced mowing technology that ensures an even cut and a clean finish. An adjustable cutting height gives users the flexibility to adapt to different grass types and growth conditions.

The Z52 model is another solid option for users looking for a balance between power and maneuverability. With a 52-inch cutting deck, this model is favored for its agility in tighter spaces while still providing a robust mowing performance. The Z52 boasts some of the latest technological advancements, including a heavy-duty chassis and an efficient engine that prolongs work time and reduces wear.

For smaller properties, the Z44 model shines with its 44-inch deck, making it perfect for navigating narrow spaces without compromising on cutting performance. Its compact size does not sacrifice power, as it is outfitted with a capable engine that can handle various grass types while providing a reliable performance.

Finally, the ZT72 model, with its impressive 72-inch cutting deck, is engineered specifically for extensive commercial use. It is built to withstand demanding conditions, featuring heavy-duty components that ensure longevity. The ZT72 also includes advanced features like an enhanced mulching option and a robust suspension system, providing a smooth ride over uneven terrain.

In summary, the Land Pride ZXT54, ZT60, Z52, Z44, and ZT72 models each offer unique features tailored to meet the varying needs of users. Whether for residential use or commercial applications, these mowers deliver power, efficiency, and unmatched comfort, ensuring that mowing tasks are completed effectively and with ease.