Land Pride Z52 , Z60, Z72 manual Control Lever and Seat Assembly, Remote Air Cleaner Assembly

Page 9

Land Pride

Section 1 Assembly and Set-Up

Control Lever and Seat Assembly

The seat is removed for ease in shipping and the control lever’s upper bolts and flat washers are removed and the levers are rotated down.

Refer to Figure 1-1:

1.Install the standard seat (#1) (or the optional suspension seat) to the seat pan (#2) using four 5/16” nuts (#3) and four 5/16” flat washers (#4).

2.Connect the switch wires on the mower with the switch wires on the seat. Secure the switch wires to the seat pan (#2) using three wire ties (#5).

3.Flip the seat over into the operating position and rotate the control levers up until the holes line up and replace the bolts and flat washers.

20858

Remote Air Cleaner Assembly

Refer to Figure 1-2:

1.Slide air cleaner clamp (#1) over air cleaner housing (#2), position the clamp so the bolt holes are facing down (away from the intake) and the notches on the clamp fit in the notches on the housing.

2.Insert air cleaner element (#3) inside air cleaner housing (#2) and attach housing end (#4) (with the arrows pointing up). Place rubber grommet (#5) over opening in housing end (#4).

3.Attach air cleaner intake cap (#6) to the air cleaner housing (#2) using a hose clamp (#7).

4.Attach air cleaner hose (#8) to the air cleaner (#2) using a hose clamp (#7).

Seat Assembly

Figure 1-1

20862

Refer To Figure 1-3:

5. Remove plastic cap from carburetor intake.

!CAUTION!

Be careful to not allow any foreign material into the carburetor while performing this assembly.

Air Cleaner Assembly

Figure 1-2

Plastic Cap

20859

Carburetor Intake

Figure 1-3

03/11/03

Z52®, Z60® & Z72® Zero Turning Radius Mowers Accu-Z 356-005M

7

Image 9
Contents Accu-Z Table of Contents Keep Riders Off Machinery Be Aware of Signal WordsFor Your Protection Shutdown and StorageSafety at All Times Practice Safe MaintenancePrepare for Emergencies Wear Protective EquipmentAvoid High Pressure Fluids Hazard 838-303C Important Safety Information838-399C 838-307C 838-308C 838-310CApplication Using This ManualOwner Assistance IntroductionControl Lever and Seat Assembly Remote Air Cleaner AssemblyAssembly and Set-Up Remote Air Cleaner Assembly Optional Equipment AssembliesControl Lever Extensions Mower Deck Preparation Accu-Vac AssemblyBlower Drive Belt Blower, Pulley and Pulley Cover AssemblyBagger Assembly Bagger Assembly Controls Ignition SwitchOperation Throttle ControlControl Levers Blade Engagement SwitchDeck Height Deck Lift Locking Pin Control LeversInstrumentation Safety Start Interlock SystemEngine Starting Hour MeterFront of mower Faces This Direction Moving Mower with Stalled EngineOperating Suggestions Driving the MowerSteering To Stop or Decrease SpeedMower Deck Operation Operating Instructions Torque Values AdjustmentsSteering Linkage Control Lever Park Brake SlotControl Lever Neutral Adjustment Jam NutStop Control Lever Control Lever Stops Reverse Spring AdjustmentTop Nylock Nut Reverse Spring Nylock Nut LinkageControl Lever Adjustment Park Brake AdjustmentSteering Dampener Steering Dampener Upper Control Lever Cap Screw LowerControl Lever Park Brake Slot Outside Edge Travel Slot Front Brake Link Right SideBy-Pass Valve Jam Nut Brake Linkage TurnbuckleDeck Drive Belt Adjustment Hydraulic Pump Belt AdjustmentEngine RPM Setting Deck Leveling and Height AdjustmentStop Handle Height Adjusting Blocks Deck Level AdjustmentsDeck Lift Threaded Rod Nut Nut Chain Bolt Adjuster Jam Nut Hardware Deck Lift Threaded Rod Foot Pedal Nut Nut ChainLift Block Deck Lift Rod Assist Springs Height Adjusting Stop Plate Deck Cutting Height AdjustmentAnti-Scalp Rollers Anti-Scalp Rollers Adjusting HolesTop View Deck Top View Bottom View Maintenance and LubricationMaintenance Schedule Refer to Tire Inflation Chart MaintenanceTires Torque ValuesBattery Hour MeterLubrication Electrical System Hydraulic System Access to Engine and Hydraulic PumpsSeat Platform Seat Platform Catch Control Lever Hydraulic Reservoir Hydraulic FilterFuel System Engine Oil and FilterFuel Filter Engine Air Filter Improper InstallationEngine Oil Filler Tube Oil Filter Drain Plug Over ServicingGeneral Engine Maintenance Engine Air Filter Service ProcedureDamaged Filter, Seals or Canister Incorrect Air Filter ElementMower Blade Maintenance Belt ReplacementMower Blade Removal Lift Jack OptionNew Season Preparation Preparation of Engine for StorageSpecifications and Capacities Indicators Safety FeaturesWeight Kit Parking52, 60 or 72 Cutting width Features and BenefitsTroubleshooting Appendix Tire Inflation ChartTire Inflation PSIWarranty Corporate Office P.O. Box Salina, Kansas 67402-5060 USA
Related manuals
Manual 6 pages 11.76 Kb

Z60, Z52, Z52 , Z60, Z72 specifications

Land Pride is a recognized leader in the manufacturing of high-quality outdoor equipment, particularly known for their commercial mowers. Among their lineup, models like the ZXT54, ZT60, Z52, Z44, and ZT72 stand out for their commitment to performance, durability, and ease of use. These zero-turn mowers are designed to tackle a variety of mowing tasks, making them ideal for both residential and commercial applications.

The Land Pride ZXT54 model features a 54-inch cutting deck, which provides ample width for efficient mowing. Its powerful engine, designed for reliability and performance, ensures that grass can be cut cleanly and quickly, even in challenging conditions. Users appreciate the intuitive controls that allow for precise maneuvering, making it easy to navigate around obstacles like trees and flower beds. The ZXT54 also includes features such as a comfortable seat and ergonomic handle grips, enhancing operator comfort during extended use.

Moving to the ZT60, this model takes it a step further with a 60-inch cutting deck. This increased size makes it ideal for large lawns or commercial properties, allowing more area to be covered in less time. The ZT60 is equipped with advanced mowing technology that ensures an even cut and a clean finish. An adjustable cutting height gives users the flexibility to adapt to different grass types and growth conditions.

The Z52 model is another solid option for users looking for a balance between power and maneuverability. With a 52-inch cutting deck, this model is favored for its agility in tighter spaces while still providing a robust mowing performance. The Z52 boasts some of the latest technological advancements, including a heavy-duty chassis and an efficient engine that prolongs work time and reduces wear.

For smaller properties, the Z44 model shines with its 44-inch deck, making it perfect for navigating narrow spaces without compromising on cutting performance. Its compact size does not sacrifice power, as it is outfitted with a capable engine that can handle various grass types while providing a reliable performance.

Finally, the ZT72 model, with its impressive 72-inch cutting deck, is engineered specifically for extensive commercial use. It is built to withstand demanding conditions, featuring heavy-duty components that ensure longevity. The ZT72 also includes advanced features like an enhanced mulching option and a robust suspension system, providing a smooth ride over uneven terrain.

In summary, the Land Pride ZXT54, ZT60, Z52, Z44, and ZT72 models each offer unique features tailored to meet the varying needs of users. Whether for residential use or commercial applications, these mowers deliver power, efficiency, and unmatched comfort, ensuring that mowing tasks are completed effectively and with ease.