Land Pride Z52 , Z60, Z72 manual Features and Benefits, 52, 60 or 72 Cutting width

Page 44

Land Pride

Section 6 Features and Benefits

Features

Benefits

52”, 60” or 72” Cutting width

Most popular cutting widths for upper homeowner market and entry into light commercial

 

market.

Mid-mount deck design

Mid-mount design puts the deck closer to the operator’s line of sight for a more efficient

 

and precise operation.

Compact size

76” in length, is the shortest ZTR on the market. Enhances mowing maneuverability, as

 

well as fitting on trailers or storing more efficiently.

53” Drive tire stance

Narrow width allows for tight turns in corners, yet gives a very stable platform for the

 

operator.

Steering levers

Dual steering levers which control each drive wheel, have a shape and position that is

 

very user friendly, hand and arm fatigue are greatly minimized.

3/16” Deck w/ 3/8” reinforcement

One of the heaviest built decks in the industry for years of rigorous use. Reinforced front

 

edge where most of the punishment happens.

Floating deck design

Deck has a spring assisted chain suspension which offers excellent flotation over uneven

 

terrain.

Deck height adjustment

Height is changed by a spring-loaded foot operated lever and pin. Easy to push and

 

faster than waiting on an electric actuation.

Anti-scalp rollers

Front and four corners to keep scalping to a minimum.

Cutting height

1” to 5” Range in 1/4” increments to cut any type of turf grass.

High blade tip speed

18,700 fpm Assures a good finish cut.

High lift blades

Heavy-duty 1/4” high lift blades are thick to handle the wear, with a high lift design to

 

stand the grass up before cutting.

Mulching kit

A mulching kit is available to recycle clippings and discharge them down into the grass.

1” Blade spindles

1” Blades spindles with sealed ball bearings handle heavy shock loads.

Single belt drive

Single belt design offers easier maintenance over multiple belt designs, less expensive

 

to maintain.

Electric clutch control

Easy and smooth engagement of the mower blade drive system.

Parking Brake & Safety Lockout

Drum brakes and safety lockout are engaged when steering levers are placed in neutral,

 

does not require a separate operation to place in neutral. One less thing to look for if

 

mower does not start

Drive

Each rear drive wheel has a separate hydrostatic pump & direct drive motor.

Electric start

Easily starts with the turn of a key.

Engine hour meter

Helps in determining maintenance schedules and trade-in values.

12 gallon fuel capacity

Less down time.

Easy engine maintenance

Engine is mounted so that all of the maintenance items can be serviced from the rear of

 

the mower vs. the side.

No daily lube points

Blade spindles require grease only once a year. Sealed bearings on front caster wheel

 

forks.

Molded vinyl seat

Molded seat incorporates a high back and armrests to give extra comfort for the long

 

jobs.

Molded-in cup holders

Easy to reach cup holders fit a wide variety of cups, and are in easy access to driver.

Steering lever extensions

For extra comfort for the larger person. Add the extensions to give more leg room.

Floating deck design

Deck has a spring assisted chain suspension which offers excellent flotation over uneven

 

terrain.

Deck height adjustment

Height is changed by a spring-loaded foot operated lever and pin. Easy to push and

 

faster than waiting on an electric actuation.

 

 

42 Z52®, Z60® & Z72® Zero Turning Radius Mowers Accu-Z 356-005M

03/11/03

Image 44
Contents Accu-Z Table of Contents Be Aware of Signal Words Keep Riders Off MachineryFor Your Protection Shutdown and StoragePractice Safe Maintenance Safety at All TimesAvoid High Pressure Fluids Hazard Prepare for EmergenciesWear Protective Equipment Important Safety Information 838-303C838-307C 838-308C 838-310C 838-399CUsing This Manual ApplicationOwner Assistance IntroductionAssembly and Set-Up Control Lever and Seat AssemblyRemote Air Cleaner Assembly Control Lever Extensions Remote Air Cleaner AssemblyOptional Equipment Assemblies Accu-Vac Assembly Mower Deck PreparationBlower, Pulley and Pulley Cover Assembly Blower Drive BeltBagger Assembly Bagger Assembly Ignition Switch ControlsOperation Throttle ControlBlade Engagement Switch Control LeversDeck Height Deck Lift Locking Pin Control LeversSafety Start Interlock System InstrumentationEngine Starting Hour MeterMoving Mower with Stalled Engine Front of mower Faces This DirectionDriving the Mower Operating SuggestionsSteering To Stop or Decrease SpeedMower Deck Operation Operating Instructions Adjustments Torque ValuesSteering Linkage Control Lever Park Brake SlotStop Control Lever Control Lever Neutral AdjustmentJam Nut Reverse Spring Adjustment Control Lever StopsTop Nylock Nut Reverse Spring Nylock Nut LinkagePark Brake Adjustment Control Lever AdjustmentSteering Dampener Steering Dampener Upper Control Lever Cap Screw LowerFront Brake Link Right Side Control Lever Park Brake Slot Outside Edge Travel SlotBy-Pass Valve Jam Nut Brake Linkage TurnbuckleHydraulic Pump Belt Adjustment Deck Drive Belt AdjustmentEngine RPM Setting Deck Leveling and Height AdjustmentDeck Lift Threaded Rod Nut Nut Chain Stop Handle Height Adjusting BlocksDeck Level Adjustments Lift Block Deck Lift Rod Assist Springs Bolt Adjuster Jam Nut HardwareDeck Lift Threaded Rod Foot Pedal Nut Nut Chain Deck Cutting Height Adjustment Height Adjusting Stop PlateAnti-Scalp Rollers Adjusting Holes Anti-Scalp RollersMaintenance and Lubrication Top View Deck Top View Bottom ViewMaintenance Schedule Maintenance Refer to Tire Inflation ChartTires Torque ValuesLubrication Electrical System BatteryHour Meter Access to Engine and Hydraulic Pumps Hydraulic SystemSeat Platform Seat Platform Catch Control Lever Hydraulic Reservoir Hydraulic FilterFuel Filter Fuel SystemEngine Oil and Filter Improper Installation Engine Air FilterEngine Oil Filler Tube Oil Filter Drain Plug Over ServicingEngine Air Filter Service Procedure General Engine MaintenanceDamaged Filter, Seals or Canister Incorrect Air Filter ElementBelt Replacement Mower Blade MaintenanceMower Blade Removal Lift Jack OptionPreparation of Engine for Storage New Season PreparationSpecifications and Capacities Safety Features IndicatorsWeight Kit ParkingFeatures and Benefits 52, 60 or 72 Cutting widthTroubleshooting Tire Inflation Chart AppendixTire Inflation PSIWarranty Corporate Office P.O. Box Salina, Kansas 67402-5060 USA
Related manuals
Manual 6 pages 11.76 Kb

Z60, Z52, Z52 , Z60, Z72 specifications

Land Pride is a recognized leader in the manufacturing of high-quality outdoor equipment, particularly known for their commercial mowers. Among their lineup, models like the ZXT54, ZT60, Z52, Z44, and ZT72 stand out for their commitment to performance, durability, and ease of use. These zero-turn mowers are designed to tackle a variety of mowing tasks, making them ideal for both residential and commercial applications.

The Land Pride ZXT54 model features a 54-inch cutting deck, which provides ample width for efficient mowing. Its powerful engine, designed for reliability and performance, ensures that grass can be cut cleanly and quickly, even in challenging conditions. Users appreciate the intuitive controls that allow for precise maneuvering, making it easy to navigate around obstacles like trees and flower beds. The ZXT54 also includes features such as a comfortable seat and ergonomic handle grips, enhancing operator comfort during extended use.

Moving to the ZT60, this model takes it a step further with a 60-inch cutting deck. This increased size makes it ideal for large lawns or commercial properties, allowing more area to be covered in less time. The ZT60 is equipped with advanced mowing technology that ensures an even cut and a clean finish. An adjustable cutting height gives users the flexibility to adapt to different grass types and growth conditions.

The Z52 model is another solid option for users looking for a balance between power and maneuverability. With a 52-inch cutting deck, this model is favored for its agility in tighter spaces while still providing a robust mowing performance. The Z52 boasts some of the latest technological advancements, including a heavy-duty chassis and an efficient engine that prolongs work time and reduces wear.

For smaller properties, the Z44 model shines with its 44-inch deck, making it perfect for navigating narrow spaces without compromising on cutting performance. Its compact size does not sacrifice power, as it is outfitted with a capable engine that can handle various grass types while providing a reliable performance.

Finally, the ZT72 model, with its impressive 72-inch cutting deck, is engineered specifically for extensive commercial use. It is built to withstand demanding conditions, featuring heavy-duty components that ensure longevity. The ZT72 also includes advanced features like an enhanced mulching option and a robust suspension system, providing a smooth ride over uneven terrain.

In summary, the Land Pride ZXT54, ZT60, Z52, Z44, and ZT72 models each offer unique features tailored to meet the varying needs of users. Whether for residential use or commercial applications, these mowers deliver power, efficiency, and unmatched comfort, ensuring that mowing tasks are completed effectively and with ease.