Land Pride Z52 , Z60, Z72 manual Bagger Assembly

Page 14

Land Pride

Section 1 Assembly and Set-Up

5.Install bagger (#1) through brackets and secure with pins (#2).

6.Assemble clamps (#3) on the ends of the bagger tube (#4) and slide the tube over the bagger inlet and the blower as shown in Figure 1-9 and tighten clamps.

NOTE: Lubricant can be used when installing tube to bagger so the tube will slide over bagger inlet easier.

Bagger Assembly

Figure 1-9

Front Lift and Weight Assembly (For Blade Service or Replacement)

IMPORTANT: Do not use jack to support mower while working under the deck. Chock back wheels and securely block unit up before working under the deck.

1. The front weight bracket (#1) will mount to the front of the mower frame with the four u-bolts (#2) lock washers (#3) and nuts (#4) on the Z60 & Z72 mowers. The Z52 mounts with two u-bolts (#2) on the right side and one bolt (#7) and nut (#4) on the left side of frame as shown in Figure 1-10.

2. Fill the weight (#5) with sand and secure to weight bracket with bolts (#8), lock washers (#9) and flat washers (#10).

3. Assemble jack (#6) to the jack mount on the weight bracket.

Front Lift and Weight Assembly

Figure 1-10

19911

Z52 Left Side

19909

12 Z52®, Z60® & Z72® Zero Turning Radius Mowers Accu-Z 356-005M

03/11/03

Image 14
Contents Accu-Z Table of Contents For Your Protection Be Aware of Signal WordsKeep Riders Off Machinery Shutdown and StoragePractice Safe Maintenance Safety at All TimesAvoid High Pressure Fluids Hazard Prepare for EmergenciesWear Protective Equipment Important Safety Information 838-303C838-307C 838-308C 838-310C 838-399COwner Assistance Using This ManualApplication IntroductionAssembly and Set-Up Control Lever and Seat AssemblyRemote Air Cleaner Assembly Control Lever Extensions Remote Air Cleaner AssemblyOptional Equipment Assemblies Accu-Vac Assembly Mower Deck PreparationBlower, Pulley and Pulley Cover Assembly Blower Drive BeltBagger Assembly Bagger Assembly Operation Ignition SwitchControls Throttle ControlDeck Height Deck Lift Locking Pin Blade Engagement SwitchControl Levers Control LeversEngine Starting Safety Start Interlock SystemInstrumentation Hour MeterMoving Mower with Stalled Engine Front of mower Faces This DirectionSteering Driving the MowerOperating Suggestions To Stop or Decrease SpeedMower Deck Operation Operating Instructions Steering Linkage AdjustmentsTorque Values Control Lever Park Brake SlotStop Control Lever Control Lever Neutral AdjustmentJam Nut Top Nylock Nut Reverse Spring Reverse Spring AdjustmentControl Lever Stops Nylock Nut LinkageSteering Dampener Park Brake AdjustmentControl Lever Adjustment Steering Dampener Upper Control Lever Cap Screw LowerBy-Pass Valve Jam Nut Front Brake Link Right SideControl Lever Park Brake Slot Outside Edge Travel Slot Brake Linkage TurnbuckleEngine RPM Setting Hydraulic Pump Belt AdjustmentDeck Drive Belt Adjustment Deck Leveling and Height AdjustmentDeck Lift Threaded Rod Nut Nut Chain Stop Handle Height Adjusting BlocksDeck Level Adjustments Lift Block Deck Lift Rod Assist Springs Bolt Adjuster Jam Nut HardwareDeck Lift Threaded Rod Foot Pedal Nut Nut Chain Deck Cutting Height Adjustment Height Adjusting Stop PlateAnti-Scalp Rollers Adjusting Holes Anti-Scalp RollersMaintenance and Lubrication Top View Deck Top View Bottom ViewMaintenance Schedule Tires MaintenanceRefer to Tire Inflation Chart Torque ValuesLubrication Electrical System BatteryHour Meter Seat Platform Seat Platform Catch Control Lever Access to Engine and Hydraulic PumpsHydraulic System Hydraulic Reservoir Hydraulic FilterFuel Filter Fuel SystemEngine Oil and Filter Engine Oil Filler Tube Oil Filter Drain Plug Improper InstallationEngine Air Filter Over ServicingDamaged Filter, Seals or Canister Engine Air Filter Service ProcedureGeneral Engine Maintenance Incorrect Air Filter ElementMower Blade Removal Belt ReplacementMower Blade Maintenance Lift Jack OptionPreparation of Engine for Storage New Season PreparationSpecifications and Capacities Weight Kit Safety FeaturesIndicators ParkingFeatures and Benefits 52, 60 or 72 Cutting widthTroubleshooting Tire Tire Inflation ChartAppendix Inflation PSIWarranty Corporate Office P.O. Box Salina, Kansas 67402-5060 USA
Related manuals
Manual 6 pages 11.76 Kb

Z60, Z52, Z52 , Z60, Z72 specifications

Land Pride is a recognized leader in the manufacturing of high-quality outdoor equipment, particularly known for their commercial mowers. Among their lineup, models like the ZXT54, ZT60, Z52, Z44, and ZT72 stand out for their commitment to performance, durability, and ease of use. These zero-turn mowers are designed to tackle a variety of mowing tasks, making them ideal for both residential and commercial applications.

The Land Pride ZXT54 model features a 54-inch cutting deck, which provides ample width for efficient mowing. Its powerful engine, designed for reliability and performance, ensures that grass can be cut cleanly and quickly, even in challenging conditions. Users appreciate the intuitive controls that allow for precise maneuvering, making it easy to navigate around obstacles like trees and flower beds. The ZXT54 also includes features such as a comfortable seat and ergonomic handle grips, enhancing operator comfort during extended use.

Moving to the ZT60, this model takes it a step further with a 60-inch cutting deck. This increased size makes it ideal for large lawns or commercial properties, allowing more area to be covered in less time. The ZT60 is equipped with advanced mowing technology that ensures an even cut and a clean finish. An adjustable cutting height gives users the flexibility to adapt to different grass types and growth conditions.

The Z52 model is another solid option for users looking for a balance between power and maneuverability. With a 52-inch cutting deck, this model is favored for its agility in tighter spaces while still providing a robust mowing performance. The Z52 boasts some of the latest technological advancements, including a heavy-duty chassis and an efficient engine that prolongs work time and reduces wear.

For smaller properties, the Z44 model shines with its 44-inch deck, making it perfect for navigating narrow spaces without compromising on cutting performance. Its compact size does not sacrifice power, as it is outfitted with a capable engine that can handle various grass types while providing a reliable performance.

Finally, the ZT72 model, with its impressive 72-inch cutting deck, is engineered specifically for extensive commercial use. It is built to withstand demanding conditions, featuring heavy-duty components that ensure longevity. The ZT72 also includes advanced features like an enhanced mulching option and a robust suspension system, providing a smooth ride over uneven terrain.

In summary, the Land Pride ZXT54, ZT60, Z52, Z44, and ZT72 models each offer unique features tailored to meet the varying needs of users. Whether for residential use or commercial applications, these mowers deliver power, efficiency, and unmatched comfort, ensuring that mowing tasks are completed effectively and with ease.