Land Pride 22076, 720-132M manual Grease Type Lubrication, Driveline U-Joints, Pillow Block Bearing

Page 40

Table of Contents

Section 7 Lubrication and Fluids

Grease Type Lubrication

There are several points on the vehicle that require lubrication. It is important that these points be lubricated frequently to maintain ease of lever operation and to ensure long bearing life.

Driveline U-Joints

Refer to Figure 7-12and Figure7-13

100 hrs

Grease every 100 hours of operation

•Type of Grease: Multipurpose

•Quantity: 3 or 4 pumps of the grease gun. Stop adding grease if lubricant is emerging through the seals.

22078

Front Drive Line U-Joint

Figure 7-12

Pillow Block Bearing

Refer to Figure 7-14

100 hrs

The Pillow block bearing is located along side the left side of the engine below the fuel filter.

•Grease every 100 hours of operation

•Type of Grease: Multipurpose

•Quantity: 3 or 4 pumps of the grease gun.

Stop adding grease if lubricant emerges through the seals.

22067

Figure 7-14

Rotating Bearing Surfaces

Refer to Figure 7-15

Daily

The swivel tube is located in the rear frame (See Figure 7-15).

•Grease daily before putting into service

•Type of Grease: Multipurpose

•Quantity: Grease until lubricant emerges from one end of the bushing.

21356

Rear Drive Line U-Joint

Figure7-13

21356

Figure 7-15

38

4400EX Heavy Duty Off Road Utility Vehicle 720-132M

7/01/05

Page 39 Page 41
Image 40
Page 39 Page 41
Contents Gondo Table of Contents Safety First Using This ManualApplication IntroductionLand Pride Service Department East North Street Owner AssistanceSerial Number Plate Product SupportSafety Symbol Be Aware of Signal WordsImportant Safety Information For Your ProtectionPractice Safe Maintenance Tire SafetyPrepare for Emergencies Wear Protective EquipmentSafe Operating Procedures Table of Contents Safety Decals 818-543C838-492C 838-629C 838-486C 838-490C 838-628C 838-667C838-688C Machine RolloverDealer Service and Inspection List Pre-Delivery CertificatePre-Delivery and Check List Vehicle InformationDealer Delivery To Customer List Customer Acceptance ListGeneral Operation Operator ResponsibilitiesOperating Instructions Foot Operated Controls Hand Operated Controls Engine Hood ReleaseFuel Indicator SteeringSeat Belt Components Seat BeltsDriving Conditions Towing the Gondo Traverse Traveling on Steep HillsPulling Loads Towing Without a TrailerTraveling Tips From the Trail Masters Preparation and PlanningPlan Your Route Plan Your GearTable of Contents Options and Accessories Gondo OptionsDump Bed Option Tailgate Operation Cargo box option onlyGondo Accessories General Maintenance Prepare Vehicle for MaintenanceMaintenance Torque ValuesTire Maintenance Tire Inflation Chart Inflation PSI Front Tires Rear TiresJacking the Vehicle Seat BeltsBattery Jump Starting the BatteryElectrical System Prepare Vehicle to Jump-StartConnecting Jumper Cables Disconnecting Jumper CablesFuel System Filling the Fuel Tank Fuel Filter and Fuel Line MaintenanceEmptying the Fuel Tank Engine Maintenance Power Steering BeltGeneral Information High Altitude Carburetor KitAir Filter Maintenance Schedule Air Filter Replacement PartsPrecleaner Foam Element Engine Air FilterSpark Arrester Maintenance Schedule Spark Arrester Maintenance ProcedureSpark Arrester Replacement Parts Spark ArresterMaintenance Schedule Engine Oil Maintenance Schedule Engine OilLubrication and Fluids Engine Oil Type and CapacityLand Pride Oil Filter Engine Oil and Filter ChangeRefer to Figures 7-1, 7-2, 7-3, 7-4 Differential Maintenance Schedule Differential Oil Type and CapacityDifferential Oil Level Check Differential Oil ChangeTransmission Maintenance Schedule Transmission FluidTransmission Fluid Type and Capacity Transmission Oil Level CheckBrake Fluid Steering & Cargo Lift Cylinder FluidGrease Type Lubrication Driveline U-JointsPillow Block Bearing Rotating Bearing SurfacesSeasonal Storage Engine Preparation for StorageVehicle Storage Preparation Vehicle Removal From Storage PreparationIntroduction Light ScuffScratch Body RepairDeep Gouge Specifications and Capacities 4400EX Series GondoTable of Contents Troubleshooting Engine overheats Engine runs unevenlyEngine stops running Gear Shift is malfunctioningPark brake doesn’t work Starter cranks slowlySteering does not track correctly Steering play is excessiveVehicle speed does not reach 17 MPH Vehicle looses ground speed withoutAppendix Torque Values ChartIn-tpi Ft-lb Land Pride Limited Warranty Utility VehicleCorporate Office P.O. Box 5060 Salina, Kansas 67402-5060 USA

22081, 22076, 720-132M specifications

Land Pride is renowned for its high-quality agricultural and landscaping equipment, and among its impressive lineup, the Land Pride 720-132M mower stands out as a versatile solution for various mowing applications. Designed with performance and efficiency in mind, the 720-132M mower is perfect for both residential and commercial users looking for a reliable machine capable of handling diverse terrain and mowing conditions.

One of the key features of the 720-132M is its robust cutting deck, which measures 132 inches in width. This wide cutting capability allows for expansive mowing coverage in fewer passes, significantly reducing mowing time and increasing productivity. The deck is constructed from heavy-duty materials, ensuring durability and longevity even when used in challenging environments.

Equipped with a high-performance cutting system, the mower boasts engineered blades that provide a clean and precise cut, promoting healthier lawn growth. The unique blade overlap design ensures consistent cutting performance across the entire width of the deck, reducing the likelihood of uncut areas left behind.

The Land Pride 720-132M features adjustable cutting height settings, giving operators the flexibility to adapt the mower to various grass types and desired finish quality. This adjustability is crucial for achieving optimal results, especially when transitioning from different mowing conditions.

Safety is a top priority for Land Pride, and the 720-132M integrates several safety features to protect both the operator and the equipment. Its robust frame design provides stability during operation, while operator presence controls ensure the mower stops when the operator leaves the seat, mitigating the risk of unintended accidents.

The mower is compatible with a wide range of tractors, allowing for seamless integration with existing equipment. Its simple attachment system enables quick mounting and dismounting, making it user-friendly and convenient for varying mowing tasks.

Another notable technology in the 720-132M is its efficient power transfer system. The mower is designed to maximize performance while minimizing wear and tear on the tractor, ensuring that operators can tackle their mowing tasks with confidence and ease.

Overall, the Land Pride 720-132M mower, with its advanced technologies and features, stands out as a leading choice for those seeking reliable and efficient mowing solutions tailored to both professional and personal landscaping needs.
Top Page Image Contents