Land Pride 22081 Safety Symbol, Be Aware of Signal Words, For Your Protection, Before Operating

Page 5

Table of Contents

Section 2 Important Safety Information

IMPORTANT: Read and understand all pages in this manual thoroughly before operating your vehicle.

These are common practices that may or may not be applicable to the products described in this manual.

Safety Symbol

Look for the Safety symbol throughout this manual. The SAFETY ALERT SYMBOL indicates there is a potential hazard to personal safety involved and extra safety precaution must be taken. When you see this symbol, be alert and carefully read the message that follows it. In addition to design and configuration of equipment, hazard control and accident prevention are dependent upon the awareness, concern, prudence and proper training of personnel involved in the operation, transport, maintenance and storage of equipment.

!

Be Aware of Signal Words

Signal words designate a degree or level of hazard seriousness. The signal words are:

!DANGER

DANGER indicates an imminently hazardous situation which, if not avoided, will result in serious injury or death. This signal word is limited to the most extreme situations, typically for vehicle components that, for functional purposes, cannot be guarded.

!WARNING

WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury, and includes hazards that are exposed when guards are removed. It may also be used to alert against unsafe practices.

!CAUTION

CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.

For Your Protection

▲Thoroughly read and understand the “Safety Decal” section, read all instructions noted on the decals.

Before Operating

▲This Gondo Heavy Duty Utility Vehicle is not to be driven on public roads.

▲Do not operate this vehicle under the influence of alcohol or drugs.

▲Always inspect the vehicle before operating it. See "Pre-Start Check List" on page 14.

▲Do not operate this machine unless all safety shields are in place and all badly worn, broken or missing parts have been properly replaced.

▲Wear appropriate protective gear and clothing such as safety helmet, goggles, gloves, coveralls, etc., when conditions warrant.

▲No driver under age of 16.

OFF

7/01/05

4400EX Heavy Duty Off Road Utility Vehicle 720-132M 3

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Gondo Table of Contents Using This Manual Safety FirstApplication IntroductionOwner Assistance Land Pride Service Department East North StreetSerial Number Plate Product SupportBe Aware of Signal Words Safety SymbolImportant Safety Information For Your ProtectionTire Safety Practice Safe MaintenancePrepare for Emergencies Wear Protective EquipmentSafe Operating Procedures Table of Contents 818-543C Safety Decals838-492C 838-629C 838-486C 838-667C 838-490C 838-628CMachine Rollover 838-688CPre-Delivery Certificate Dealer Service and Inspection ListPre-Delivery and Check List Vehicle InformationCustomer Acceptance List Dealer Delivery To Customer ListOperating Instructions Operator ResponsibilitiesGeneral Operation Foot Operated Controls Engine Hood Release Hand Operated ControlsSteering Fuel IndicatorSeat Belt Components Seat BeltsDriving Conditions Traverse Traveling on Steep Hills Towing the GondoPulling Loads Towing Without a TrailerPreparation and Planning Traveling Tips From the Trail MastersPlan Your Route Plan Your GearTable of Contents Gondo Options Options and AccessoriesDump Bed Option Tailgate Operation Cargo box option onlyGondo Accessories Prepare Vehicle for Maintenance General MaintenanceMaintenance Torque ValuesTire Inflation Chart Inflation PSI Front Tires Rear Tires Tire MaintenanceJacking the Vehicle Seat BeltsJump Starting the Battery BatteryElectrical System Prepare Vehicle to Jump-StartFuel System Disconnecting Jumper CablesConnecting Jumper Cables Emptying the Fuel Tank Fuel Filter and Fuel Line MaintenanceFilling the Fuel Tank Power Steering Belt Engine MaintenanceGeneral Information High Altitude Carburetor KitAir Filter Replacement Parts Air Filter Maintenance SchedulePrecleaner Foam Element Engine Air FilterSpark Arrester Maintenance Procedure Spark Arrester Maintenance ScheduleSpark Arrester Replacement Parts Spark ArresterMaintenance Schedule Engine Oil Engine Oil Maintenance ScheduleLubrication and Fluids Engine Oil Type and CapacityRefer to Figures 7-1, 7-2, 7-3, 7-4 Engine Oil and Filter ChangeLand Pride Oil Filter Differential Oil Type and Capacity Differential Maintenance ScheduleDifferential Oil Level Check Differential Oil ChangeTransmission Fluid Transmission Maintenance ScheduleTransmission Fluid Type and Capacity Transmission Oil Level CheckSteering & Cargo Lift Cylinder Fluid Brake FluidDriveline U-Joints Grease Type LubricationPillow Block Bearing Rotating Bearing SurfacesEngine Preparation for Storage Seasonal StorageVehicle Storage Preparation Vehicle Removal From Storage PreparationLight Scuff IntroductionScratch Body RepairDeep Gouge 4400EX Series Gondo Specifications and CapacitiesTable of Contents Troubleshooting Engine runs unevenly Engine overheatsGear Shift is malfunctioning Engine stops runningPark brake doesn’t work Starter cranks slowlySteering play is excessive Steering does not track correctlyVehicle speed does not reach 17 MPH Vehicle looses ground speed withoutIn-tpi Ft-lb Torque Values ChartAppendix Utility Vehicle Land Pride Limited WarrantyCorporate Office P.O. Box 5060 Salina, Kansas 67402-5060 USA

22081, 22076, 720-132M specifications

Land Pride is renowned for its high-quality agricultural and landscaping equipment, and among its impressive lineup, the Land Pride 720-132M mower stands out as a versatile solution for various mowing applications. Designed with performance and efficiency in mind, the 720-132M mower is perfect for both residential and commercial users looking for a reliable machine capable of handling diverse terrain and mowing conditions.

One of the key features of the 720-132M is its robust cutting deck, which measures 132 inches in width. This wide cutting capability allows for expansive mowing coverage in fewer passes, significantly reducing mowing time and increasing productivity. The deck is constructed from heavy-duty materials, ensuring durability and longevity even when used in challenging environments.

Equipped with a high-performance cutting system, the mower boasts engineered blades that provide a clean and precise cut, promoting healthier lawn growth. The unique blade overlap design ensures consistent cutting performance across the entire width of the deck, reducing the likelihood of uncut areas left behind.

The Land Pride 720-132M features adjustable cutting height settings, giving operators the flexibility to adapt the mower to various grass types and desired finish quality. This adjustability is crucial for achieving optimal results, especially when transitioning from different mowing conditions.

Safety is a top priority for Land Pride, and the 720-132M integrates several safety features to protect both the operator and the equipment. Its robust frame design provides stability during operation, while operator presence controls ensure the mower stops when the operator leaves the seat, mitigating the risk of unintended accidents.

The mower is compatible with a wide range of tractors, allowing for seamless integration with existing equipment. Its simple attachment system enables quick mounting and dismounting, making it user-friendly and convenient for varying mowing tasks.

Another notable technology in the 720-132M is its efficient power transfer system. The mower is designed to maximize performance while minimizing wear and tear on the tractor, ensuring that operators can tackle their mowing tasks with confidence and ease.

Overall, the Land Pride 720-132M mower, with its advanced technologies and features, stands out as a leading choice for those seeking reliable and efficient mowing solutions tailored to both professional and personal landscaping needs.
Top Page Image Contents