Land Pride 720-132M Practice Safe Maintenance, Prepare for Emergencies, Wear Protective Equipment

Page 6

Table of Contents

Section 2 Important Safety Information

Practice Safe

Maintenance

▲Understand procedure before doing work. Use proper tools and equipment. Refer to this manual for additional information.

▲Work in a clean, dry area.

▲Place the vehicle in neutral, set parking brake, turn off engine and remove key before performing maintenance. Chock wheels if you must perform maintenance on a slope.

▲Make sure all moving parts have stopped and all system pressure is relieved.

▲Allow the engine to cool completely.

▲Disconnect battery ground cable (-) before servicing or adjusting electrical systems or before welding.

▲Inspect all parts. Make sure parts are in good condition and installed properly.

▲Remove build-up of grease, oil or debris.

▲Remove all tools and unused parts from the Gondo before operation.

OFF

Prepare for

Emergencies

▲Be prepared if a fire starts.

▲Keep a first aid kit and fire extinguisher handy.

▲Keep emergency numbers for doctor, ambulance, hospital and fire department near phone.

911

Wear Protective

Equipment

▲Wear protective clothing and equipment.

▲Wear clothing and equipment appropriate for the job. Avoid loose-fitting clothing.

▲Because prolonged exposure to loud noise can cause hearing impairment or hearing loss, it is best to wear suitable hearing protection such as earmuffs or earplugs.

▲Because operating equipment safely requires your full attention, avoid wearing radio headphones while operating machinery.

▲It is the discretion of the operator and passenger to wear Seat Belts when available.

Tire Safety

Tire changing can be dangerous and should be performed by trained personnel using correct tools and equipment.

▲When inflating tires, use a clip-on chuck and extension hose long enough for you to stand to one side–not in front of or over tire assembly. Use a safety cage if available.

▲When removing and installing wheels, use wheel-handling equipment adequate for weight involved.

4

4400EX Heavy Duty Off Road Utility Vehicle 720-132M

7/01/05

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Gondo Table of Contents Application Safety FirstUsing This Manual IntroductionSerial Number Plate Land Pride Service Department East North StreetOwner Assistance Product SupportImportant Safety Information Safety SymbolBe Aware of Signal Words For Your ProtectionPrepare for Emergencies Practice Safe MaintenanceTire Safety Wear Protective EquipmentSafe Operating Procedures Table of Contents Safety Decals 818-543C838-492C 838-629C 838-486C 838-490C 838-628C 838-667C838-688C Machine RolloverPre-Delivery and Check List Dealer Service and Inspection ListPre-Delivery Certificate Vehicle InformationDealer Delivery To Customer List Customer Acceptance ListOperator Responsibilities General OperationOperating Instructions Foot Operated Controls Hand Operated Controls Engine Hood ReleaseSeat Belt Components Fuel IndicatorSteering Seat BeltsDriving Conditions Pulling Loads Towing the GondoTraverse Traveling on Steep Hills Towing Without a TrailerPlan Your Route Traveling Tips From the Trail MastersPreparation and Planning Plan Your GearTable of Contents Dump Bed Option Options and AccessoriesGondo Options Tailgate Operation Cargo box option onlyGondo Accessories Maintenance General MaintenancePrepare Vehicle for Maintenance Torque ValuesJacking the Vehicle Tire MaintenanceTire Inflation Chart Inflation PSI Front Tires Rear Tires Seat BeltsElectrical System BatteryJump Starting the Battery Prepare Vehicle to Jump-StartDisconnecting Jumper Cables Connecting Jumper CablesFuel System Fuel Filter and Fuel Line Maintenance Filling the Fuel TankEmptying the Fuel Tank General Information Engine MaintenancePower Steering Belt High Altitude Carburetor KitPrecleaner Foam Element Air Filter Maintenance ScheduleAir Filter Replacement Parts Engine Air FilterSpark Arrester Replacement Parts Spark Arrester Maintenance ScheduleSpark Arrester Maintenance Procedure Spark ArresterMaintenance Schedule Lubrication and Fluids Engine Oil Maintenance ScheduleEngine Oil Engine Oil Type and CapacityEngine Oil and Filter Change Land Pride Oil FilterRefer to Figures 7-1, 7-2, 7-3, 7-4 Differential Oil Level Check Differential Maintenance ScheduleDifferential Oil Type and Capacity Differential Oil ChangeTransmission Fluid Type and Capacity Transmission Maintenance ScheduleTransmission Fluid Transmission Oil Level CheckBrake Fluid Steering & Cargo Lift Cylinder FluidPillow Block Bearing Grease Type LubricationDriveline U-Joints Rotating Bearing SurfacesVehicle Storage Preparation Seasonal StorageEngine Preparation for Storage Vehicle Removal From Storage PreparationScratch IntroductionLight Scuff Body RepairDeep Gouge Specifications and Capacities 4400EX Series GondoTable of Contents Troubleshooting Engine overheats Engine runs unevenlyPark brake doesn’t work Engine stops runningGear Shift is malfunctioning Starter cranks slowlyVehicle speed does not reach 17 MPH Steering does not track correctlySteering play is excessive Vehicle looses ground speed withoutTorque Values Chart AppendixIn-tpi Ft-lb Land Pride Limited Warranty Utility VehicleCorporate Office P.O. Box 5060 Salina, Kansas 67402-5060 USA

22081, 22076, 720-132M specifications

Land Pride is renowned for its high-quality agricultural and landscaping equipment, and among its impressive lineup, the Land Pride 720-132M mower stands out as a versatile solution for various mowing applications. Designed with performance and efficiency in mind, the 720-132M mower is perfect for both residential and commercial users looking for a reliable machine capable of handling diverse terrain and mowing conditions.

One of the key features of the 720-132M is its robust cutting deck, which measures 132 inches in width. This wide cutting capability allows for expansive mowing coverage in fewer passes, significantly reducing mowing time and increasing productivity. The deck is constructed from heavy-duty materials, ensuring durability and longevity even when used in challenging environments.

Equipped with a high-performance cutting system, the mower boasts engineered blades that provide a clean and precise cut, promoting healthier lawn growth. The unique blade overlap design ensures consistent cutting performance across the entire width of the deck, reducing the likelihood of uncut areas left behind.

The Land Pride 720-132M features adjustable cutting height settings, giving operators the flexibility to adapt the mower to various grass types and desired finish quality. This adjustability is crucial for achieving optimal results, especially when transitioning from different mowing conditions.

Safety is a top priority for Land Pride, and the 720-132M integrates several safety features to protect both the operator and the equipment. Its robust frame design provides stability during operation, while operator presence controls ensure the mower stops when the operator leaves the seat, mitigating the risk of unintended accidents.

The mower is compatible with a wide range of tractors, allowing for seamless integration with existing equipment. Its simple attachment system enables quick mounting and dismounting, making it user-friendly and convenient for varying mowing tasks.

Another notable technology in the 720-132M is its efficient power transfer system. The mower is designed to maximize performance while minimizing wear and tear on the tractor, ensuring that operators can tackle their mowing tasks with confidence and ease.

Overall, the Land Pride 720-132M mower, with its advanced technologies and features, stands out as a leading choice for those seeking reliable and efficient mowing solutions tailored to both professional and personal landscaping needs.
Top Page Image Contents