Land Pride RCMB6010, RCMB6015 manual Constant Velocity Input Driveline Profile Tubes

Land Pride Table of Contents

Section 4: Maintenance & Lubrication

Zerk located through slot in tubes

15312

Drivelines with external tube grease point

Zerk Located on end of tube

23565

Drivelines with internal tube grease point

20

Hrs

Constant Velocity Input Driveline Profile Tubes

Type of Lubrication: Multi-purpose Grease

Quantity = Coat Generously

15312

Drivelines with external tube grease point

23565

Drivelines with internal tube grease point

8

Hrs

Constant Velocity Input Driveline Joints & Shields

Type of Lubrication: Multi-purpose Grease

NOTE: To extend the life of the constant velocity joint, extensive lubrication must be performed every 8 hours of operation.

•The constant velocity joint should be greased in a straight position forcing grease through the passages and into the cavity. After lubrication, grease should be visible around the ball joints.

•The constant velocity driveline comes equipped with a grease zerk in the outer telescoping member and must be greased every 8 hours to prevent premature failure of the joint.

•Grease fittings are located on the u-joints and driveline shields and should be lubricated every 8 hours of operation.

9/04/08 RCB6010 & RCB6015 (540 RPM) and RCMB6010 & RCMB6015 (1000 RPM) Rotary Cutters 318-263M 33