JVC RX-7022VSL manual Video component connections, CD player, Cassette deck or CD recorder, Vcr

Page 10

Getting Started

CD player

CD player

To audio output

PHONO

CD

OUT

(REC)

TAPE

CDR

IN

(PLAY)

OUT

(REC)

VCR

IN

(PLAY)

TV

SOUND

DBS

RIGHT LEFT

AUDIO

Video component connections

Use the cables with RCA pin plugs (not supplied).

Connect the white plug to the audio left jack, the red plug to the audio right jack, and the yellow plug to the video jack.

If video components have S-video (Y/C-separation) and/or component video (Y, PB/CB, PR/CR) terminals, connect them using an S-video cable (not supplied) and/or component video cable (not supplied). By using these terminals, you can get a better picture quality in the order — Component video > S-video > Composite video.

IMPORTANT:

This unit is equipped with the following video terminals; composite video, S-video and component video terminals. You can use any of these three to connect a video component.

However, remember that the video signals from one type of these input terminals are output only through the video output terminals of the same type.

Cassette deck or CD recorder

Cassette deck

To audio input

PHONO

CD

OUT

(REC)

TAPE

CDR

IN

(PLAY)

OUT

(REC)

VCR

To audio output

Therefore, if a recording video component and a playing video component are connected to the unit through the different types of video terminals, you cannot record the picture from the playing component onto the recording component. In addition, if the TV and a playing video component are connected to the unit through the different types of video terminals, you cannot view the playback picture from the playing component on the TV.

VCR

S-VHS (or VHS) VCR

C

D

A

 

 

B

E

F

 

IN

(PLAY)

TV

SOUND

DBS

RIGHT LEFT

AUDIO

PHONO

 

 

CD

 

 

OUT

AUDIO

(REC)

 

 

TAPE

RIGHT

LEFT

CDR

FRONT

 

IN

 

(PLAY)

 

DVD

 

 

MONITOR

OUT

DVD

To audio input

 

To audio output

 

CD recorder

Note:

You can connect either a cassette deck or a CD recorder to the TAPE/ CDR jacks. When connecting a CD recorder to the TAPE/CDR jacks, change the source name, which will be shown on the display when selected as the source. See page 11 for details.

OUT

 

SUB

CENTER

(REC)

 

 

 

WOOFER

 

VCR

 

REAR

 

 

 

 

IN

 

 

 

(PLAY)

 

RIGHT

LEFT

 

 

TV

 

 

 

SOUND

 

 

 

DBS

 

 

 

RIGHT

LEFT

SUBWOOFER

VIDEO

AUDIO

OUT

 

OUT

(REC)

VCR

IN

(PLAY)

DBS

VIDEO S-VIDEO

If your audio components have a COMPU LINK jack

See also page 31 for detailed information about the connection and the COMPU LINK remote control system.

ÅTo left/right channel audio output ı To left/right channel audio input Ç To composite video output

Î To S-video output To S-video input

Ï To composite video input

7

Image 10
Contents RX-7022VSL Page RX-7022VSL Table of Contents Parts Identification Remote ControlFront Panel Getting Started Before Installation Putting Batteries in the Remote ControlChecking the Supplied Accessories Replace the coverAM antenna connection Connecting the FM and AM AntennasFM antenna connection Connecting the Speakers Getting StartedConnecting the subwoofer speaker Connecting Audio/Video ComponentsConnecting the rear and center speakers Analog connections Audio component connectionsCassette deck or CD recorder Video component connectionsCD player VCRDVD player TV and/or DBS tuner DVD playerDBS tuner B Digital connections Connecting the Power CordPlug the power cord into an AC outlet Digital output terminalBasic Operations Turning On the PowerSelecting the Source to Play Adjusting the Volume Basic OperationsHeadphone mode Listening Only with HeadphonesTurning Off the Power With the Sleep Timer Changing the Display BrightnessSignal indicators Speaker indicators Basic adjustment auto memorySignal and speaker indicators on the display Speaker indicators light up whenSetting the Digital Input Basic SettingsDigital in Terminals Basic Settings Selecting the Analog or Digital Input ModeSelecting the Video Input Setting the Speaker Information RemoteTerminal Select the appropriate speaker distance Unit with the current setting Appears on the displayPress Control UP 5/DOWN ∞ to select the unit Speaker sizeCrossover frequency Select the low frequency effect attenuator levelTo select the appropriate compression Level Dynamic range compressionAdjusting the Front Speakers Sound AdjustmentsOutput Balance Adjusting the Subwoofer Output Level Adjusting the ToneReinforcing the Bass Using Preset Tuning Tuning in Stations ManuallyTuner Operations Selecting the FM Reception Mode DTS Digital Surround Creating Realistic Sound FieldsDolby Surround Typical Multichannel 5.1 ch reproductionCreating sound field DVD Multi Playback ModeDAP Digital Acoustic Processor modes All Channel StereoTurning on or off the Surround modes Creating Realistic Sound FieldsAbout Relations between Speaker Layouts and Surround Modes Selecting the Surround modesIf you like to adjust sound, go to step Activate Surround modePress Surround ON/OFF to Equal level Adjust the speaker output levels -10 to +10Press Test to check if you can hear Press Test again to stop the testUsing DAP Modes and All Channel Stereo Effect with the current Setting* appears on the display Press Surround ON/OFF to activate Surround modePress Surround Mode repeatedly Surround Mode PAVILION-or ALL CH Stereo appears on the displayPress DVD Multi Using DVD Multi Playback ModeActivating DVD Multi Playback Mode Following indications appears On the displayAutomatic Source Selection Compu Link Remote Control SystemPress the play 3 button on the CD player Synchronized RecordingConnections 2 Video Cable Connections AV Compu Link Remote Control SystemConnections 1 AV Compu Link Connection CaseAutomatic Power On/Off AV Compu Link Remote Control SystemAutomatic Selection of TV’s Input Mode One-Touch Video PlayOperating JVC’s Audio/Video Components Sound AdjustmentEx. When you press CD Operating Audio ComponentsOperating JVC’s Audio/Video Components DVD player Operating Video ComponentsDVD menu operations Operating Other Manufacturers’ Video Equipment To change the transmittable signals for operating a TVIf there are more than one code listed for your brand of TV Try to operate your TV by pressing TVTry to operate your VCR by pressing To change the transmittable signals for operating a VCRIf there are more than one code listed for your brand Manufacturers’ codes for Catv converter CodesManufacturers’ codes for VCR Codes Operating Other Manufacturers’ Video EquipmentTry to operate your DVD player by pressing Manufacturers’ codes for DVD player CodesTroubleshooting Problem Possible Cause SolutionSpecifications AmplifierAM tuner FM tuner IHFGeneral 0402NHMMDWJEIN

RX-7022VSL specifications

The JVC RX-7022VSL is a versatile and powerful receiver designed to enhance the audio experience in your home entertainment system. This model combines advanced technologies and user-friendly features, making it a popular choice among audio enthusiasts.

One of the standout features of the RX-7022VSL is its robust power output. The receiver provides 100 watts per channel, delivering a clear and dynamic sound across various audio formats. This power output is particularly beneficial for driving larger speakers, ensuring that even the most demanding audio tracks are rendered with precision and clarity.

The RX-7022VSL is equipped with multiple audio inputs, including HDMI, coaxial, and optical connections. This extensive range of inputs allows easy connectivity with various source devices, such as Blu-ray players, gaming consoles, and streaming devices. The receiver also supports multiple audio formats, including Dolby Digital, DTS, and PCM, ensuring optimal compatibility with your existing audio equipment.

One of the key technologies featured in the RX-7022VSL is JVC’s proprietary Digital Signal Processing (DSP). This technology enhances the sound quality by providing advanced audio filtering and sound field options, allowing you to tailor the listening experience to your preferences. The receiver also includes a built-in equalizer, enabling users to adjust the sound profile to suit their audio tastes and room acoustics.

In addition to its audio capabilities, the RX-7022VSL includes a user-friendly remote control, allowing for easy adjustment of settings from across the room. The on-screen display simplifies navigation through various audio modes and settings, making it accessible for users of all skill levels.

The design of the RX-7022VSL is both sleek and functional, with a modern aesthetic that fits well in any home theater setup. The front panel features a clear LED display, rotary knobs for volume and input selection, and dedicated buttons for quick access to commonly used features.

In summary, the JVC RX-7022VSL receiver stands out for its powerful audio performance, versatile connectivity options, and user-friendly interface. With its combination of cutting-edge technology and thoughtful design, it is well-suited for both casual listeners and audiophiles seeking to elevate their home sound experience. Whether you're watching movies, listening to music, or enjoying gaming, the RX-7022VSL delivers a captivating audio experience that enhances any entertainment setup.