JVC RX-7022VSL manual Getting Started, Before Installation Putting Batteries in the Remote Control

Page 6

Getting Started

Before Installation

Putting Batteries in the Remote Control

General Precautions

•DO NOT insert any metal object into the unit.

•DO NOT disassemble the unit or remove screws, covers, or cabinet.

•DO NOT expose the unit to rain or moisture.

Locations

•Install the unit in a location that is level and protected from moisture.

•The temperature around the unit must be between –5˚C and 35˚C

•Make sure there is good ventilation around the unit. Poor ventilation could cause overheating and damage the unit.

Handling the unit

•DO NOT touch the power cord with wet hands.

•DO NOT pull on the power cord to unplug the cord. When unplugging the cord, always grasp the plug so as not to damage the cord.

•Keep the power cord away from the connecting cords and the antenna. The power cord may cause noise or screen interference. It is recommended to use a coaxial cable for antenna connection, since it is well-shielded against interference.

•When a power failure occurs, or when you unplug the power cord, the preset settings such as preset FM/AM channels and sound adjustments may be erased in a few days.

Checking the Supplied Accessories

Check to be sure you have all of the following supplied accessories. The number in the parentheses indicates the quantity of the pieces supplied.

•Remote Control (1)

•Batteries (2)

•AM Loop Antenna (1)

•FM Antenna (1)

If anything is missing, contact your dealer immediately.

Before using the remote control, put two supplied batteries first.

•When using the remote control, aim the remote control directly at the remote sensor on the unit.

1On the back of the remote control, remove the battery cover.

2Insert batteries.

• Make sure to match the polarity: (+) to (+) and (–) to (–).

3Replace the cover.

If the range or effectiveness of the remote control decreases, replace the batteries. Use two R6P(SUM-3)/AA(15F) type dry-cell batteries.

CAUTION:

Follow these precautions to avoid leaking or cracking cells:

•Place batteries in the remote control so they match the polarity:

(+) to (+) and (–) to (–).

•Use the correct type of batteries. Batteries that look similar may differ in voltage.

•Always replace both batteries at the same time.

•Do not expose batteries to heat or flame.

3

Page 5 Page 7
Image 6
Page 5 Page 7
Contents RX-7022VSL Page RX-7022VSL Table of Contents Remote Control Parts IdentificationFront Panel Getting Started Before Installation Putting Batteries in the Remote ControlChecking the Supplied Accessories Replace the coverConnecting the FM and AM Antennas AM antenna connectionFM antenna connection Connecting the Speakers Getting StartedConnecting the subwoofer speaker Connecting Audio/Video ComponentsConnecting the rear and center speakers Analog connections Audio component connectionsCassette deck or CD recorder Video component connectionsCD player VCRTV and/or DBS tuner DVD player DVD playerDBS tuner B Digital connections Connecting the Power CordPlug the power cord into an AC outlet Digital output terminalTurning On the Power Basic OperationsSelecting the Source to Play Adjusting the Volume Basic OperationsHeadphone mode Listening Only with HeadphonesTurning Off the Power With the Sleep Timer Changing the Display BrightnessSignal indicators Speaker indicators Basic adjustment auto memorySignal and speaker indicators on the display Speaker indicators light up whenBasic Settings Setting the Digital InputDigital in Terminals Basic Settings Selecting the Analog or Digital Input ModeSetting the Speaker Information Remote Selecting the Video InputTerminal Select the appropriate speaker distance Unit with the current setting Appears on the displayPress Control UP 5/DOWN ∞ to select the unit Speaker sizeCrossover frequency Select the low frequency effect attenuator levelTo select the appropriate compression Level Dynamic range compressionSound Adjustments Adjusting the Front SpeakersOutput Balance Adjusting the Tone Adjusting the Subwoofer Output LevelReinforcing the Bass Tuning in Stations Manually Using Preset TuningTuner Operations Selecting the FM Reception Mode DTS Digital Surround Creating Realistic Sound FieldsDolby Surround Typical Multichannel 5.1 ch reproductionCreating sound field DVD Multi Playback ModeDAP Digital Acoustic Processor modes All Channel StereoTurning on or off the Surround modes Creating Realistic Sound FieldsAbout Relations between Speaker Layouts and Surround Modes Selecting the Surround modesActivate Surround mode If you like to adjust sound, go to stepPress Surround ON/OFF to Equal level Adjust the speaker output levels -10 to +10Press Test to check if you can hear Press Test again to stop the testUsing DAP Modes and All Channel Stereo Effect with the current Setting* appears on the display Press Surround ON/OFF to activate Surround modePress Surround Mode repeatedly Surround Mode PAVILION-or ALL CH Stereo appears on the displayPress DVD Multi Using DVD Multi Playback ModeActivating DVD Multi Playback Mode Following indications appears On the displayAutomatic Source Selection Compu Link Remote Control SystemPress the play 3 button on the CD player Synchronized RecordingConnections 2 Video Cable Connections AV Compu Link Remote Control SystemConnections 1 AV Compu Link Connection CaseAutomatic Power On/Off AV Compu Link Remote Control SystemAutomatic Selection of TV’s Input Mode One-Touch Video PlayOperating JVC’s Audio/Video Components Sound AdjustmentEx. When you press CD Operating Audio ComponentsOperating JVC’s Audio/Video Components Operating Video Components DVD playerDVD menu operations Operating Other Manufacturers’ Video Equipment To change the transmittable signals for operating a TVIf there are more than one code listed for your brand of TV Try to operate your TV by pressing TVTry to operate your VCR by pressing To change the transmittable signals for operating a VCRIf there are more than one code listed for your brand Manufacturers’ codes for Catv converter CodesManufacturers’ codes for VCR Codes Operating Other Manufacturers’ Video EquipmentTry to operate your DVD player by pressing Manufacturers’ codes for DVD player CodesTroubleshooting Problem Possible Cause SolutionSpecifications AmplifierFM tuner IHF AM tunerGeneral 0402NHMMDWJEIN

RX-7022VSL specifications

The JVC RX-7022VSL is a versatile and powerful receiver designed to enhance the audio experience in your home entertainment system. This model combines advanced technologies and user-friendly features, making it a popular choice among audio enthusiasts.

One of the standout features of the RX-7022VSL is its robust power output. The receiver provides 100 watts per channel, delivering a clear and dynamic sound across various audio formats. This power output is particularly beneficial for driving larger speakers, ensuring that even the most demanding audio tracks are rendered with precision and clarity.

The RX-7022VSL is equipped with multiple audio inputs, including HDMI, coaxial, and optical connections. This extensive range of inputs allows easy connectivity with various source devices, such as Blu-ray players, gaming consoles, and streaming devices. The receiver also supports multiple audio formats, including Dolby Digital, DTS, and PCM, ensuring optimal compatibility with your existing audio equipment.

One of the key technologies featured in the RX-7022VSL is JVC’s proprietary Digital Signal Processing (DSP). This technology enhances the sound quality by providing advanced audio filtering and sound field options, allowing you to tailor the listening experience to your preferences. The receiver also includes a built-in equalizer, enabling users to adjust the sound profile to suit their audio tastes and room acoustics.

In addition to its audio capabilities, the RX-7022VSL includes a user-friendly remote control, allowing for easy adjustment of settings from across the room. The on-screen display simplifies navigation through various audio modes and settings, making it accessible for users of all skill levels.

The design of the RX-7022VSL is both sleek and functional, with a modern aesthetic that fits well in any home theater setup. The front panel features a clear LED display, rotary knobs for volume and input selection, and dedicated buttons for quick access to commonly used features.

In summary, the JVC RX-7022VSL receiver stands out for its powerful audio performance, versatile connectivity options, and user-friendly interface. With its combination of cutting-edge technology and thoughtful design, it is well-suited for both casual listeners and audiophiles seeking to elevate their home sound experience. Whether you're watching movies, listening to music, or enjoying gaming, the RX-7022VSL delivers a captivating audio experience that enhances any entertainment setup.
Top Page Image Contents