JVC RX-7022VSL AV Compu Link Remote Control System, Connections 1 AV Compu Link Connection, Case

Page 35

AV COMPU LINK Remote Control System

The AV COMPU LINK remote control system allows you to operate JVC’s video components (TV, VCR, and DVD player) through the receiver.

This receiver is equipped with the AV COMPU LINK-III, which added a function to operate JVC’s video components through the video components terminals. To use this remote control system, you need to connect the video components you want to operate, following the diagrams below and the procedure on the next page.

CONNECTIONS 1: AV COMPU LINK Connection

VCR

DVD player

TV

VHS

DVD

AV

COMPU LINK – III

AV

COMPU LINK

AV

COMPU LINK

IMPORTANT:

The AV COMPU LINK remote control system cannot control the DBS tuner connected to the TV SOUND/DBS and DBS COMPONENT VIDEO terminals.

AV COMPU LINK EX

AV

COMPU LINK III

Note:

You can only connect to the TV with the AV COMPU LINK EX or AV COMPU LINK III terminal. The TV with AV COMPU LINK RECEIVER/AMP terminal will not be used.

Notes:

•When connecting the receiver and a TV with the AV COMPU LINK EX terminal by using a component video cable, you cannot use Automatic Selection of TV’s Input Mode (see page 33).

•When connecting only the VCR or DVD player to this receiver, connect it directly to the receiver using cables with the monaural mini-plugs.

•Make sure that the remote control code of the VCR connected to the VCR jacks is set to code “A.”

•Refer also to the manuals supplied with your video components.

CONNECTIONS 2: Video Cable Connections

This receiver is equipped with three types of video terminals — S-video, composite video, and component video — and the signals coming into this receiver through one type of video terminal can output only through the same type of the terminal. So you need to connect the VCR and/or DVD player to the TV using one of the following three ways:

CASE 1

 

When connecting the source equipment to the receiver using the S-video terminals, connect also this

 

receiver to the TV’s Video Input 1 terminal using S-video cables.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Source

 

 

 

 

RX-7022VSL

 

 

 

 

TV

 

 

 

 

Equipment

S-video cable

 

S-video cable

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note:

 

 

 

 

 

 

 

 

 

 

To Video Input 1

 

If you connect the DVD player and the DBS tuner to this receiver using the S-video terminals, change the video input

 

terminal setting to “S/C” (see page 16).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CASE 2

When connecting the source equipment to the receiver using the composite video terminals, connect also

 

this receiver to the TV’s Video Input 2 terminal (composite video input) using composite video cables.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Source

 

 

 

 

RX-7022VSL

 

 

 

 

TV

 

 

 

 

Equipment

Composite

 

 

Composite

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

video cable

 

 

 

video cable

 

 

 

 

 

 

Note:

 

 

 

 

 

 

To Video Input 2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(Composite)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If you connect the DVD player and the DBS tuner to this receiver using the composite video terminals, change the video

 

input terminal setting to “S/C” (see page 16).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CASE 3

When connecting the source equipment to the receiver using the component video terminals, connect also

 

this receiver to the TV’s Video Input 2 terminals (component video input) using component video cables.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Source

 

 

 

 

RX-7022VSL

 

 

 

 

TV

 

 

 

 

Equipment

Component

 

 

 

Component

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

video cable

 

 

 

video cable

 

 

 

 

 

Note:

 

 

 

 

 

 

 

To Video Input 2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(Component)

 

If you connect the DVD player and the DBS tuner to this receiver using the component video terminals, change the

 

video input terminal setting to “COMPONENT” (see page 16).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

32

Page 34 Page 36
Image 35
Page 34 Page 36
Contents RX-7022VSL Page RX-7022VSL Table of Contents Front Panel Remote ControlParts Identification Replace the cover Before Installation Putting Batteries in the Remote ControlChecking the Supplied Accessories Getting StartedFM antenna connection Connecting the FM and AM AntennasAM antenna connection Getting Started Connecting the SpeakersAnalog connections Audio component connections Connecting Audio/Video ComponentsConnecting the rear and center speakers Connecting the subwoofer speakerVCR Video component connectionsCD player Cassette deck or CD recorderDBS tuner B TV and/or DBS tuner DVD playerDVD player Digital output terminal Connecting the Power CordPlug the power cord into an AC outlet Digital connectionsSelecting the Source to Play Turning On the PowerBasic Operations Basic Operations Adjusting the VolumeChanging the Display Brightness Listening Only with HeadphonesTurning Off the Power With the Sleep Timer Headphone modeSpeaker indicators light up when Basic adjustment auto memorySignal and speaker indicators on the display Signal indicators Speaker indicatorsDigital in Terminals Basic SettingsSetting the Digital Input Selecting the Analog or Digital Input Mode Basic SettingsTerminal Setting the Speaker Information RemoteSelecting the Video Input Speaker size Unit with the current setting Appears on the displayPress Control UP 5/DOWN ∞ to select the unit Select the appropriate speaker distanceDynamic range compression Select the low frequency effect attenuator levelTo select the appropriate compression Level Crossover frequencyOutput Balance Sound AdjustmentsAdjusting the Front Speakers Reinforcing the Bass Adjusting the ToneAdjusting the Subwoofer Output Level Tuner Operations Tuning in Stations ManuallyUsing Preset Tuning Selecting the FM Reception Mode Typical Multichannel 5.1 ch reproduction Creating Realistic Sound FieldsDolby Surround DTS Digital SurroundAll Channel Stereo DVD Multi Playback ModeDAP Digital Acoustic Processor modes Creating sound fieldSelecting the Surround modes Creating Realistic Sound FieldsAbout Relations between Speaker Layouts and Surround Modes Turning on or off the Surround modesPress Surround ON/OFF to Activate Surround modeIf you like to adjust sound, go to step Press Test again to stop the test Adjust the speaker output levels -10 to +10Press Test to check if you can hear Equal levelUsing DAP Modes and All Channel Stereo PAVILION-or ALL CH Stereo appears on the display Press Surround ON/OFF to activate Surround modePress Surround Mode repeatedly Surround Mode Effect with the current Setting* appears on the displayFollowing indications appears On the display Using DVD Multi Playback ModeActivating DVD Multi Playback Mode Press DVD MultiSynchronized Recording Compu Link Remote Control SystemPress the play 3 button on the CD player Automatic Source SelectionCase AV Compu Link Remote Control SystemConnections 1 AV Compu Link Connection Connections 2 Video Cable ConnectionsOne-Touch Video Play AV Compu Link Remote Control SystemAutomatic Selection of TV’s Input Mode Automatic Power On/OffOperating Audio Components Sound AdjustmentEx. When you press CD Operating JVC’s Audio/Video ComponentsOperating JVC’s Audio/Video Components DVD menu operations Operating Video ComponentsDVD player Try to operate your TV by pressing TV To change the transmittable signals for operating a TVIf there are more than one code listed for your brand of TV Operating Other Manufacturers’ Video EquipmentManufacturers’ codes for Catv converter Codes To change the transmittable signals for operating a VCRIf there are more than one code listed for your brand Try to operate your VCR by pressingManufacturers’ codes for DVD player Codes Operating Other Manufacturers’ Video EquipmentTry to operate your DVD player by pressing Manufacturers’ codes for VCR CodesProblem Possible Cause Solution TroubleshootingAmplifier SpecificationsGeneral FM tuner IHFAM tuner 0402NHMMDWJEIN

RX-7022VSL specifications

The JVC RX-7022VSL is a versatile and powerful receiver designed to enhance the audio experience in your home entertainment system. This model combines advanced technologies and user-friendly features, making it a popular choice among audio enthusiasts.

One of the standout features of the RX-7022VSL is its robust power output. The receiver provides 100 watts per channel, delivering a clear and dynamic sound across various audio formats. This power output is particularly beneficial for driving larger speakers, ensuring that even the most demanding audio tracks are rendered with precision and clarity.

The RX-7022VSL is equipped with multiple audio inputs, including HDMI, coaxial, and optical connections. This extensive range of inputs allows easy connectivity with various source devices, such as Blu-ray players, gaming consoles, and streaming devices. The receiver also supports multiple audio formats, including Dolby Digital, DTS, and PCM, ensuring optimal compatibility with your existing audio equipment.

One of the key technologies featured in the RX-7022VSL is JVC’s proprietary Digital Signal Processing (DSP). This technology enhances the sound quality by providing advanced audio filtering and sound field options, allowing you to tailor the listening experience to your preferences. The receiver also includes a built-in equalizer, enabling users to adjust the sound profile to suit their audio tastes and room acoustics.

In addition to its audio capabilities, the RX-7022VSL includes a user-friendly remote control, allowing for easy adjustment of settings from across the room. The on-screen display simplifies navigation through various audio modes and settings, making it accessible for users of all skill levels.

The design of the RX-7022VSL is both sleek and functional, with a modern aesthetic that fits well in any home theater setup. The front panel features a clear LED display, rotary knobs for volume and input selection, and dedicated buttons for quick access to commonly used features.

In summary, the JVC RX-7022VSL receiver stands out for its powerful audio performance, versatile connectivity options, and user-friendly interface. With its combination of cutting-edge technology and thoughtful design, it is well-suited for both casual listeners and audiophiles seeking to elevate their home sound experience. Whether you're watching movies, listening to music, or enjoying gaming, the RX-7022VSL delivers a captivating audio experience that enhances any entertainment setup.
Top Page Image Contents