JVC RX-7022VSL Listening Only with Headphones, Changing the Display Brightness, Headphone mode

Page 15

Listening Only with Headphones

You must turn off both pairs of speakers when you listen with headphones.

1Connect a pair of headphones to the PHONES jack on the front panel.

2Press SPEAKERS ON/OFF 1 and SPEAKERS ON/OFF 2 so that neither the SPK 1 nor SPK 2 indicator appears on the display.

•“HEADPHONE” appears and H. PHONE indicator lights up on the display.

ANALOG

L

R

H.PHONE

This cancels the Surround modes currently selected and activates the HEADPHONE mode (see below).

HEADPHONE mode

When using the headphones, following signals are output regardless of your speaker setting:

—For 2 channel sources, the front left, right channel signals are output directly from the headphones.

—For multichannel sources, the front left and right, center, and rear channel signals are down-mixed and then output from the headphones.

You can enjoy multichannel sound sources using the headphones.

Notes:

•While in the HEADPHONE mode, you cannot use any Surround modes (see page 23).

•Activating the speakers cancels the HEADPHONE mode and turns on the Surround modes previously selected.

CAUTION:

Be sure to turn down the volume

•Before connecting or putting on headphones, as high volume can damage both the headphones and your hearing.

•Before turning on speakers again, as high volume may output from the speakers.

Changing the Display Brightness

You can dim the display.

Press DIMMER on the remote control.

DIMMER

 

• Each time you press the button, the display dims and

 

brightens alternately.

 

Turning Off the Power

with the Sleep Timer

You can fall asleep while listening to music—Sleep Timer.

Press SLEEP on the remote control repeatedly.

SLEEP

•The SLEEP indicator lights up on the display and the shut-off time changes in 10 minutes intervals.

ANALOG

SPK 1

SLEEP

 

L

C

R

 

S.WFR LFE

 

LS

S

RS

 

 

CH-

 

 

 

 

10 20 30 40 50 60

0(Canceled) 90 80 70

When the shut-off time comes

The receiver turns off automatically.

To check or change the remaining time until the shut-off time

Press SLEEP once.

The remaining time (in minutes) until the shut-off time appears.

•To change the shut-off time, press SLEEP repeatedly.

To cancel the Sleep Timer

Press SLEEP repeatedly until “SLEEP 0 MIN” appears on the display. (The SLEEP indicator goes off.)

•Turning off the power also cancels the Sleep Timer.

Turning Off the Sounds

Temporarily—Muting

You can turn off the volume temporarily.

Press MUTING on the remote control to mute

MUTING

the sound through all speakers and headphones

 

connected.

 

•“MUTING” appears on the display and the volume turns off (the volume level indicator goes off).

ANALOG

SPK 1

 

L

C

R

 

S.WFR LFE

 

LS

S

RS

 

 

 

CH-

 

 

 

 

To restore the sound, press MUTING again.

•Turning MASTER VOLUME on the front panel or pressing VOLUME +/– on the remote control also restores the sound.

12

Page 14 Page 16
Image 15
Page 14 Page 16
Contents RX-7022VSL Page RX-7022VSL Table of Contents Remote Control Parts IdentificationFront Panel Replace the cover Before Installation Putting Batteries in the Remote ControlChecking the Supplied Accessories Getting StartedConnecting the FM and AM Antennas AM antenna connectionFM antenna connection Getting Started Connecting the SpeakersAnalog connections Audio component connections Connecting Audio/Video ComponentsConnecting the rear and center speakers Connecting the subwoofer speakerVCR Video component connectionsCD player Cassette deck or CD recorderTV and/or DBS tuner DVD player DVD playerDBS tuner B Digital output terminal Connecting the Power CordPlug the power cord into an AC outlet Digital connectionsTurning On the Power Basic OperationsSelecting the Source to Play Basic Operations Adjusting the VolumeChanging the Display Brightness Listening Only with HeadphonesTurning Off the Power With the Sleep Timer Headphone modeSpeaker indicators light up when Basic adjustment auto memorySignal and speaker indicators on the display Signal indicators Speaker indicatorsBasic Settings Setting the Digital InputDigital in Terminals Selecting the Analog or Digital Input Mode Basic SettingsSetting the Speaker Information Remote Selecting the Video InputTerminal Speaker size Unit with the current setting Appears on the displayPress Control UP 5/DOWN ∞ to select the unit Select the appropriate speaker distanceDynamic range compression Select the low frequency effect attenuator levelTo select the appropriate compression Level Crossover frequencySound Adjustments Adjusting the Front SpeakersOutput Balance Adjusting the Tone Adjusting the Subwoofer Output LevelReinforcing the Bass Tuning in Stations Manually Using Preset TuningTuner Operations Selecting the FM Reception Mode Typical Multichannel 5.1 ch reproduction Creating Realistic Sound FieldsDolby Surround DTS Digital SurroundAll Channel Stereo DVD Multi Playback ModeDAP Digital Acoustic Processor modes Creating sound fieldSelecting the Surround modes Creating Realistic Sound FieldsAbout Relations between Speaker Layouts and Surround Modes Turning on or off the Surround modesActivate Surround mode If you like to adjust sound, go to stepPress Surround ON/OFF to Press Test again to stop the test Adjust the speaker output levels -10 to +10Press Test to check if you can hear Equal levelUsing DAP Modes and All Channel Stereo PAVILION-or ALL CH Stereo appears on the display Press Surround ON/OFF to activate Surround modePress Surround Mode repeatedly Surround Mode Effect with the current Setting* appears on the displayFollowing indications appears On the display Using DVD Multi Playback ModeActivating DVD Multi Playback Mode Press DVD MultiSynchronized Recording Compu Link Remote Control SystemPress the play 3 button on the CD player Automatic Source SelectionCase AV Compu Link Remote Control SystemConnections 1 AV Compu Link Connection Connections 2 Video Cable ConnectionsOne-Touch Video Play AV Compu Link Remote Control SystemAutomatic Selection of TV’s Input Mode Automatic Power On/OffOperating Audio Components Sound AdjustmentEx. When you press CD Operating JVC’s Audio/Video ComponentsOperating JVC’s Audio/Video Components Operating Video Components DVD playerDVD menu operations Try to operate your TV by pressing TV To change the transmittable signals for operating a TVIf there are more than one code listed for your brand of TV Operating Other Manufacturers’ Video EquipmentManufacturers’ codes for Catv converter Codes To change the transmittable signals for operating a VCRIf there are more than one code listed for your brand Try to operate your VCR by pressingManufacturers’ codes for DVD player Codes Operating Other Manufacturers’ Video EquipmentTry to operate your DVD player by pressing Manufacturers’ codes for VCR CodesProblem Possible Cause Solution TroubleshootingAmplifier SpecificationsFM tuner IHF AM tunerGeneral 0402NHMMDWJEIN

RX-7022VSL specifications

The JVC RX-7022VSL is a versatile and powerful receiver designed to enhance the audio experience in your home entertainment system. This model combines advanced technologies and user-friendly features, making it a popular choice among audio enthusiasts.

One of the standout features of the RX-7022VSL is its robust power output. The receiver provides 100 watts per channel, delivering a clear and dynamic sound across various audio formats. This power output is particularly beneficial for driving larger speakers, ensuring that even the most demanding audio tracks are rendered with precision and clarity.

The RX-7022VSL is equipped with multiple audio inputs, including HDMI, coaxial, and optical connections. This extensive range of inputs allows easy connectivity with various source devices, such as Blu-ray players, gaming consoles, and streaming devices. The receiver also supports multiple audio formats, including Dolby Digital, DTS, and PCM, ensuring optimal compatibility with your existing audio equipment.

One of the key technologies featured in the RX-7022VSL is JVC’s proprietary Digital Signal Processing (DSP). This technology enhances the sound quality by providing advanced audio filtering and sound field options, allowing you to tailor the listening experience to your preferences. The receiver also includes a built-in equalizer, enabling users to adjust the sound profile to suit their audio tastes and room acoustics.

In addition to its audio capabilities, the RX-7022VSL includes a user-friendly remote control, allowing for easy adjustment of settings from across the room. The on-screen display simplifies navigation through various audio modes and settings, making it accessible for users of all skill levels.

The design of the RX-7022VSL is both sleek and functional, with a modern aesthetic that fits well in any home theater setup. The front panel features a clear LED display, rotary knobs for volume and input selection, and dedicated buttons for quick access to commonly used features.

In summary, the JVC RX-7022VSL receiver stands out for its powerful audio performance, versatile connectivity options, and user-friendly interface. With its combination of cutting-edge technology and thoughtful design, it is well-suited for both casual listeners and audiophiles seeking to elevate their home sound experience. Whether you're watching movies, listening to music, or enjoying gaming, the RX-7022VSL delivers a captivating audio experience that enhances any entertainment setup.
Top Page Image Contents