JVC RX-7022VSL manual Press Test to check if you can hear, Equal level, Tone, Press Control UP

Page 30
SURROUND MODE

Creating Realistic Sound Fields

3 Press SOUND.

SOUND

The 10 keys are activated for sound adjustments.

4 Press TEST to check if you can hear

TEST

 

the sounds through all the speakers at

4

 

the equal level.

 

“TEST TONE L” starts flashing on the display and a test tone comes out of the speakers in the following order:

 

TEST TONE L

TEST TONE C

 

 

TEST TONE R

 

 

(Left front speaker)

(Center speaker)

 

 

(Right front speaker)

 

 

TEST TONE LS

 

 

 

TEST TONE RS

 

 

 

(Left rear speaker)

(Right rear speaker)

Notes:

•You can adjust the speaker output levels without outputting the test tone.

•No test tone comes out of the center speaker when “CNTR SP” is set to “NONE.”

•No test tone comes out of the rear speakers when “REAR SP” is set to “NONE.”

5Adjust the speaker output levels (–10 to +10).

Adjust the center speaker and rear speakers levels comparing to the sound from the front speakers.

•

To adjust the center speaker level, press

– CENTER+

2

3

 

CENTER +/–.

 

 

MENU

•

To adjust the left rear speaker level, press

– REAR• L+

5

6

 

REAR•L +/–.

 

 

ENTER

 

 

 

ENTER

•

To adjust the right rear speaker level, press

– REAR• R+

8

9

 

 

REAR•R +/–.

6 Press TEST again to stop the test

TEST

4

tone.

 

On the front panel:

You can also use the buttons on the front panel to adjust the Surround modes. However, no test tone is available when using the buttons on the front panel. So make adjustments while listening to the sound of the source played back.

1Setting the analog or digital input mode for the

source you like to hear and start playing.

When playing back software encoded with Dolby Digital and DTS Digital Surround, select the digital input mode (see page 15).

2 Press SURROUND ON/OFF to

SURROUND ON/OFF

activate Surround mode.

 

Each time you press the button, Surround mode turns on and off alternately.

•If you are playing back software encoded with Dolby Digital multichannel, “DOLBY DIGITAL” is selected.

•If you are playing back software encoded with DTS Digital Surround, “DTS SURROUND” is selected.

• If you are playing back any software other than above, you can select “PL II MUSIC” or “PL II MOVIE” according to the source by pressing SURROUND MODE. ( PRO LOGIC II indicator lights up on the display.)

If you like to adjust sound, go to step 3.

3Adjust the speaker output levels.

1)

Press ADJUST repeatedly until one

ADJUST SETTING

 

 

of the following indications (with the

 

 

current setting)* appears on the

 

 

display.

 

 

SPK 1

 

TUNED STEREO

AUTOMUTING

DIGITAL AUTO

L

C

R

PROLOGIC ΙΙ DSP H.PHONE INPUT ATT

VOLUME

LINEAR PCM

S.WFR LFE

 

 

 

LS

S

RS

 

 

*“0” is the initial setting. If you have already changed the setting, another number (level) will be shown.

CENTER : To adjust the center speaker output level (–10 to +10).

REAR L : To adjust the left rear speaker output level (–10 to +10).

REAR R : To adjust the right rear speaker output level (–10 to +10).

2) Press CONTROL UP 5/

DOWN UP

 

CONTROL

DOWN ∞ to adjust the selected

 

speaker output levels.

 

3)Repeat steps 1) and 2) to adjust the other speaker levels.

27

Page 29 Page 31
Image 30
Page 29 Page 31
Contents RX-7022VSL Page RX-7022VSL Table of Contents Remote Control Parts IdentificationFront Panel Getting Started Before Installation Putting Batteries in the Remote ControlChecking the Supplied Accessories Replace the coverConnecting the FM and AM Antennas AM antenna connectionFM antenna connection Connecting the Speakers Getting StartedConnecting the subwoofer speaker Connecting Audio/Video ComponentsConnecting the rear and center speakers Analog connections Audio component connectionsCassette deck or CD recorder Video component connectionsCD player VCRTV and/or DBS tuner DVD player DVD playerDBS tuner B Digital connections Connecting the Power CordPlug the power cord into an AC outlet Digital output terminalTurning On the Power Basic OperationsSelecting the Source to Play Adjusting the Volume Basic OperationsHeadphone mode Listening Only with HeadphonesTurning Off the Power With the Sleep Timer Changing the Display BrightnessSignal indicators Speaker indicators Basic adjustment auto memorySignal and speaker indicators on the display Speaker indicators light up whenBasic Settings Setting the Digital InputDigital in Terminals Basic Settings Selecting the Analog or Digital Input ModeSetting the Speaker Information Remote Selecting the Video InputTerminal Select the appropriate speaker distance Unit with the current setting Appears on the displayPress Control UP 5/DOWN ∞ to select the unit Speaker sizeCrossover frequency Select the low frequency effect attenuator levelTo select the appropriate compression Level Dynamic range compressionSound Adjustments Adjusting the Front SpeakersOutput Balance Adjusting the Tone Adjusting the Subwoofer Output LevelReinforcing the Bass Tuning in Stations Manually Using Preset TuningTuner Operations Selecting the FM Reception Mode DTS Digital Surround Creating Realistic Sound FieldsDolby Surround Typical Multichannel 5.1 ch reproductionCreating sound field DVD Multi Playback ModeDAP Digital Acoustic Processor modes All Channel StereoTurning on or off the Surround modes Creating Realistic Sound FieldsAbout Relations between Speaker Layouts and Surround Modes Selecting the Surround modesActivate Surround mode If you like to adjust sound, go to stepPress Surround ON/OFF to Equal level Adjust the speaker output levels -10 to +10Press Test to check if you can hear Press Test again to stop the testUsing DAP Modes and All Channel Stereo Effect with the current Setting* appears on the display Press Surround ON/OFF to activate Surround modePress Surround Mode repeatedly Surround Mode PAVILION-or ALL CH Stereo appears on the displayPress DVD Multi Using DVD Multi Playback ModeActivating DVD Multi Playback Mode Following indications appears On the displayAutomatic Source Selection Compu Link Remote Control SystemPress the play 3 button on the CD player Synchronized RecordingConnections 2 Video Cable Connections AV Compu Link Remote Control SystemConnections 1 AV Compu Link Connection CaseAutomatic Power On/Off AV Compu Link Remote Control SystemAutomatic Selection of TV’s Input Mode One-Touch Video PlayOperating JVC’s Audio/Video Components Sound AdjustmentEx. When you press CD Operating Audio ComponentsOperating JVC’s Audio/Video Components Operating Video Components DVD playerDVD menu operations Operating Other Manufacturers’ Video Equipment To change the transmittable signals for operating a TVIf there are more than one code listed for your brand of TV Try to operate your TV by pressing TVTry to operate your VCR by pressing To change the transmittable signals for operating a VCRIf there are more than one code listed for your brand Manufacturers’ codes for Catv converter CodesManufacturers’ codes for VCR Codes Operating Other Manufacturers’ Video EquipmentTry to operate your DVD player by pressing Manufacturers’ codes for DVD player CodesTroubleshooting Problem Possible Cause SolutionSpecifications AmplifierFM tuner IHF AM tunerGeneral 0402NHMMDWJEIN

RX-7022VSL specifications

The JVC RX-7022VSL is a versatile and powerful receiver designed to enhance the audio experience in your home entertainment system. This model combines advanced technologies and user-friendly features, making it a popular choice among audio enthusiasts.

One of the standout features of the RX-7022VSL is its robust power output. The receiver provides 100 watts per channel, delivering a clear and dynamic sound across various audio formats. This power output is particularly beneficial for driving larger speakers, ensuring that even the most demanding audio tracks are rendered with precision and clarity.

The RX-7022VSL is equipped with multiple audio inputs, including HDMI, coaxial, and optical connections. This extensive range of inputs allows easy connectivity with various source devices, such as Blu-ray players, gaming consoles, and streaming devices. The receiver also supports multiple audio formats, including Dolby Digital, DTS, and PCM, ensuring optimal compatibility with your existing audio equipment.

One of the key technologies featured in the RX-7022VSL is JVC’s proprietary Digital Signal Processing (DSP). This technology enhances the sound quality by providing advanced audio filtering and sound field options, allowing you to tailor the listening experience to your preferences. The receiver also includes a built-in equalizer, enabling users to adjust the sound profile to suit their audio tastes and room acoustics.

In addition to its audio capabilities, the RX-7022VSL includes a user-friendly remote control, allowing for easy adjustment of settings from across the room. The on-screen display simplifies navigation through various audio modes and settings, making it accessible for users of all skill levels.

The design of the RX-7022VSL is both sleek and functional, with a modern aesthetic that fits well in any home theater setup. The front panel features a clear LED display, rotary knobs for volume and input selection, and dedicated buttons for quick access to commonly used features.

In summary, the JVC RX-7022VSL receiver stands out for its powerful audio performance, versatile connectivity options, and user-friendly interface. With its combination of cutting-edge technology and thoughtful design, it is well-suited for both casual listeners and audiophiles seeking to elevate their home sound experience. Whether you're watching movies, listening to music, or enjoying gaming, the RX-7022VSL delivers a captivating audio experience that enhances any entertainment setup.
Top Page Image Contents