JVC RX-7022VSL manual Operating Video Components, DVD player, DVD menu operations

Page 39

Operating Video Components

IMPORTANT:

To operate JVC’s video components using this remote control:

• You need to connect JVC’s video components through the AV

COMPU LINK terminals (see page 32) in addition to the

connections using cables with RCA pin plugs (see pages 7 and 8).

• Some JVC’s VCRs can accept two types of the control signals —

remote code “A” and “B.” Before using this remote control, make

sure that the remote control code of the VCR connected to the

VCR jacks is set to code “A.”

• When using the remote control:

– For the DVD player and VCR operations, aim the remote control

DVD player

After pressing DVD or DVD MULTI (source selecting button), you can use the following buttons for DVD operations:

3

: Start playback.

4

: Return to the beginning of the current

 

(or previous) track.

 

 

¢

: Skip to the beginning of the next track.

7

: Stop playback.

 

 

8

: Pause playback. To release it, press 3.

 

 

directly at the remote sensor on each component, not on the

receiver.

– For the TV having the AV COMPU LINK terminal, aim the remote

control directly at the remote sensor on the TV.

VCR

You can always perform the following operations:

VCR

: Turn on or off a VCR.

 

 

DVD menu operations

After pressing DVD or DVD MULTI (source selecting button), you can use the following buttons for DVD menu operations:

EFFECT

– CENTER+

1

2

3

 

 

MENU

TEST

– REAR• L+

4

5

6

 

 

ENTER

 

– REAR• R+

7/P

8

9

–SUBWOOFER+

10 0 +10

RETURN FMMODE 100+

After pressing VCR (or CONTROL repeatedly until “VCR” appears on the display window), you can use the following buttons for VCR operations:

3

: Start playback.

FF

: Fast wind a tape.

REW

: Rewind a tape.

7

: Stop playback or recording.

 

 

8

: Pause playback. To release it, press 3.

1 – 9, 0

: Select a TV channel on the VCR.

 

 

REC PAUSE

: Press this button to enter recording pause.

 

Press this button then 3 to start recording.

CH +/–

: Change the TV channels on the VCR.

 

 

Note:

You can use either VCR button or CONTROL button to activate the buttons listed above. If you press VCR, the playing source also changes. On the other hand, if you press CONTROL repeatedly to select “VCR,” the playing source does not change.

MENU

: Display or erase the menu screen.

5/∞/3/2

: Select an item on the menu screen.

 

 

ENTER

: Enter a selected item.

 

 

TV

You can always perform the following operations:

TV

: Turn on or off a TV or a CATV converter.

TV/VIDEO

: Change the input mode (TV tuner and video

 

input).

 

 

TV VOL +/–

: Adjust the volume.

 

 

After pressing TV/DBS (source selecting button), you can use the following buttons for TV operations:

CH +/–

: Change the channels.

1 – 9, 0, +10 (100+)

: Select a channel.

 

 

RETURN (10)

: Function as the RETURN button.

 

 

36

Page 38 Page 40
Image 39
Page 38 Page 40
Contents RX-7022VSL Page RX-7022VSL Table of Contents Remote Control Parts IdentificationFront Panel Replace the cover Before Installation Putting Batteries in the Remote ControlChecking the Supplied Accessories Getting StartedConnecting the FM and AM Antennas AM antenna connectionFM antenna connection Getting Started Connecting the SpeakersAnalog connections Audio component connections Connecting Audio/Video ComponentsConnecting the rear and center speakers Connecting the subwoofer speakerVCR Video component connectionsCD player Cassette deck or CD recorderTV and/or DBS tuner DVD player DVD playerDBS tuner B Digital output terminal Connecting the Power CordPlug the power cord into an AC outlet Digital connectionsTurning On the Power Basic OperationsSelecting the Source to Play Basic Operations Adjusting the VolumeChanging the Display Brightness Listening Only with HeadphonesTurning Off the Power With the Sleep Timer Headphone modeSpeaker indicators light up when Basic adjustment auto memorySignal and speaker indicators on the display Signal indicators Speaker indicatorsBasic Settings Setting the Digital InputDigital in Terminals Selecting the Analog or Digital Input Mode Basic SettingsSetting the Speaker Information Remote Selecting the Video InputTerminal Speaker size Unit with the current setting Appears on the displayPress Control UP 5/DOWN ∞ to select the unit Select the appropriate speaker distanceDynamic range compression Select the low frequency effect attenuator levelTo select the appropriate compression Level Crossover frequencySound Adjustments Adjusting the Front SpeakersOutput Balance Adjusting the Tone Adjusting the Subwoofer Output LevelReinforcing the Bass Tuning in Stations Manually Using Preset TuningTuner Operations Selecting the FM Reception Mode Typical Multichannel 5.1 ch reproduction Creating Realistic Sound FieldsDolby Surround DTS Digital SurroundAll Channel Stereo DVD Multi Playback ModeDAP Digital Acoustic Processor modes Creating sound fieldSelecting the Surround modes Creating Realistic Sound FieldsAbout Relations between Speaker Layouts and Surround Modes Turning on or off the Surround modesActivate Surround mode If you like to adjust sound, go to stepPress Surround ON/OFF to Press Test again to stop the test Adjust the speaker output levels -10 to +10Press Test to check if you can hear Equal levelUsing DAP Modes and All Channel Stereo PAVILION-or ALL CH Stereo appears on the display Press Surround ON/OFF to activate Surround modePress Surround Mode repeatedly Surround Mode Effect with the current Setting* appears on the displayFollowing indications appears On the display Using DVD Multi Playback ModeActivating DVD Multi Playback Mode Press DVD MultiSynchronized Recording Compu Link Remote Control SystemPress the play 3 button on the CD player Automatic Source SelectionCase AV Compu Link Remote Control SystemConnections 1 AV Compu Link Connection Connections 2 Video Cable ConnectionsOne-Touch Video Play AV Compu Link Remote Control SystemAutomatic Selection of TV’s Input Mode Automatic Power On/OffOperating Audio Components Sound AdjustmentEx. When you press CD Operating JVC’s Audio/Video ComponentsOperating JVC’s Audio/Video Components Operating Video Components DVD playerDVD menu operations Try to operate your TV by pressing TV To change the transmittable signals for operating a TVIf there are more than one code listed for your brand of TV Operating Other Manufacturers’ Video EquipmentManufacturers’ codes for Catv converter Codes To change the transmittable signals for operating a VCRIf there are more than one code listed for your brand Try to operate your VCR by pressingManufacturers’ codes for DVD player Codes Operating Other Manufacturers’ Video EquipmentTry to operate your DVD player by pressing Manufacturers’ codes for VCR CodesProblem Possible Cause Solution TroubleshootingAmplifier SpecificationsFM tuner IHF AM tunerGeneral 0402NHMMDWJEIN

RX-7022VSL specifications

The JVC RX-7022VSL is a versatile and powerful receiver designed to enhance the audio experience in your home entertainment system. This model combines advanced technologies and user-friendly features, making it a popular choice among audio enthusiasts.

One of the standout features of the RX-7022VSL is its robust power output. The receiver provides 100 watts per channel, delivering a clear and dynamic sound across various audio formats. This power output is particularly beneficial for driving larger speakers, ensuring that even the most demanding audio tracks are rendered with precision and clarity.

The RX-7022VSL is equipped with multiple audio inputs, including HDMI, coaxial, and optical connections. This extensive range of inputs allows easy connectivity with various source devices, such as Blu-ray players, gaming consoles, and streaming devices. The receiver also supports multiple audio formats, including Dolby Digital, DTS, and PCM, ensuring optimal compatibility with your existing audio equipment.

One of the key technologies featured in the RX-7022VSL is JVC’s proprietary Digital Signal Processing (DSP). This technology enhances the sound quality by providing advanced audio filtering and sound field options, allowing you to tailor the listening experience to your preferences. The receiver also includes a built-in equalizer, enabling users to adjust the sound profile to suit their audio tastes and room acoustics.

In addition to its audio capabilities, the RX-7022VSL includes a user-friendly remote control, allowing for easy adjustment of settings from across the room. The on-screen display simplifies navigation through various audio modes and settings, making it accessible for users of all skill levels.

The design of the RX-7022VSL is both sleek and functional, with a modern aesthetic that fits well in any home theater setup. The front panel features a clear LED display, rotary knobs for volume and input selection, and dedicated buttons for quick access to commonly used features.

In summary, the JVC RX-7022VSL receiver stands out for its powerful audio performance, versatile connectivity options, and user-friendly interface. With its combination of cutting-edge technology and thoughtful design, it is well-suited for both casual listeners and audiophiles seeking to elevate their home sound experience. Whether you're watching movies, listening to music, or enjoying gaming, the RX-7022VSL delivers a captivating audio experience that enhances any entertainment setup.
Top Page Image Contents