JVC RX-7022VSL manual Selecting the FM Reception Mode

4 Press MEMORY again while the	MEMORY
selected channel number is flashing
on the display.

The selected channel number stops flashing.

The station is assigned to the selected channel number.

ANALOG	SPK 1	TUNED STEREO AUTOMUTING
	L C R	VOLUME
	S.WFR LFE

LS S RS

CH-

5Repeat steps 1 to 4 until you store all the stations you want.

To erase a stored preset station

Storing a new station on a used number erases the previously stored one.

To tune in a preset station

On the front panel:

1 Press FM/AM to select the band	FM/AM
FM or AM.

The last received station of the selected band is tuned in.

•Each time you press the button, the band alternates between FM and AM.

ANALOG	SPK 1		TUNED STEREO	AUTOMUTING
	L	C	R	VOLUME
	S.WFR LFE
	LS	S	RS
		CH-

2 Press FM/AM PRESET 5/∞	FM/AM PRESET
repeatedly until you find the channel
you want.

•Pressing FM/AM PRESET 5 increases the channel numbers.

•Pressing FM/AM PRESET ∞ decreases the channel numbers.

From the remote control:
1 Press FM/AM to select the band	FM/AM
FM or AM.

The last received station of the selected band is

tuned in and the 10 keys now work for tuner operation.

•Each time you press the button, the band alternates between FM and AM.

Selecting the FM Reception Mode

When an FM stereo broadcast is hard to receive or noisy, you can change the FM reception mode while receiving an FM broadcast.

•You can store the FM reception mode for each preset station. (See page 21).

1While listening to an FM station, press FM MODE.

•Each time you press the button, the FM reception mode alternates between “AUTO*” and “MONO.”

FM MODE	–SUBWOOFER+
	0
	FMMODE

On the front panel		From the remote control
ANALOG SPK 1		TUNED STEREO AUTOMUTING
L C	R
S.WFR LFE
LS S	RS
CH-

ANALOG	SPK 1	TUNED
	L C	R

S.WFR LFE

LS S RS

CH-

* “AUTO” is the initial setting.

AUTO : Normally select this.

When a program is broadcasted in stereo, you will hear stereo sound; when in monaural, you will hear monaural sounds. This mode is also useful to suppress static noise between stations. The AUTO MUTING indicator lights up on the display.

MONO : Select this to improve the reception (but stereo effect will be lost).

In this mode, you will hear noise while tuning into the stations. The AUTO MUTING indicator goes off from the display. (The STEREO indicator also goes off.)

2Press 10 keys to select a preset channel number.

•For channel number 5, press 5.

•For channel number 15, press +10 then 5.

•For channel number 20, press +10 then 10.

•For channel number 30, press +10, +10, then 10.

Note:

EFFECT	– CENTER+
1	2	3
		MENU
TEST	– REAR• L+
4	5	6
		ENTER

– REAR• R+

7/P 8 9

–SUBWOOFER+

10 0 +10

RETURN FMMODE 100+

When you use 10 keys on the remote control, be sure that they are activated for the tuner, not for the CD and others. (See page 34).

22