JVC RX-7022VSL manual Specifications, Amplifier

Page 44

Specifications

Designs & specifications are subject to change without notice.

Amplifier

Output Power

 

At Stereo operation:

 

Front channels:

100 W per channel, min. RMS, Both channels driven into 8 Ω at

 

1 kHz, with no more than 0.9% total harmonic distortion.

At Surround operation:

 

Front channels:

100 W per channel, min. RMS, driven into 8 Ω at 1 kHz, with no

 

more than 0.8% total harmonic distortion.

Center channel:

100 W, min. RMS, driven into 8 Ω at 1 kHz, with no more than

 

0.8% total harmonic distortion.

Rear channels:

100 W per channel, min. RMS, driven into 8 Ω at 1 kHz, with no

 

more than 0.8% total harmonic distortion.

Audio

 

 

 

Audio Input Sensitivity/Impedance (1 kHz):

PHONO (MM):

 

2.7 mV/47 kΩ

 

CD, TAPE/CDR, VCR, TV SOUND/DBS, DVD:

 

 

 

220 mV/47 kΩ

Audio Input (DIGITAL IN)* :

Coaxial: DIGITAL 1

(DVD):

0.5 V (p-p)/75 Ω

 

Optical: DIGITAL 2

(CD), DIGITAL 3 (TV), DIGITAL 4 (CDR):

–21 dBm to –15 dBm (660 nm ±30 nm)

*Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround (with sampling frequency — 32 kHz, 44.1 kHz, 48 kHz).

Audio Output Level:

TAPE/CDR, VCR:

220 mV

 

Digital output:

Optical: DIGITAL OUTPUT

 

 

 

Signal wave length: 660 nm

 

 

Output level: –21 dBm to –15 dBm

 

Signal-to-Noise Ratio (’66 IHF/DIN):

PHONO (MM):

70 dB/ 66 dB (at REC OUT)

 

CD, TAPE/CDR, VCR, TV SOUND/DBS, DVD:

 

 

 

87 dB/67 dB

 

Frequency Response (8 Ω):

PHONO (MM):

20 Hz to 20 kHz (±1 dB)

 

CD, TAPE/CDR, VCR, TV SOUND/DBS, DVD:

 

 

 

20 Hz to 20 kHz (±1 dB)

RIAA Phono Equalization:

±1 dB(20 Hz to 20 kHz)

 

 

Bass boost:

+3 dB ±1 dB at 100 Hz

 

 

Tone Control:

Bass (100 Hz):

±10 dB

 

 

Treble (10 kHz):

±10 dB

 

Video

 

 

 

Video Input Sensitivity/Impedance:

 

 

1 V(p-p)/75 Ω

Composite video:

DVD, VCR, DBS:

 

S-video:

DVD, VCR, DBS:

(Y: luminance):

1 V(p-p)/75 Ω

 

 

(C: chrominance, burst):

0.286 V(p-p)/75 Ω

Component video:

DVD, DBS:

(Y: luminance):

1 V(p-p)/75 Ω

 

 

(PB/CB, PR/CR):

0.7 V(p-p)/75 Ω

Video Output Level/Impedance:

 

 

1 V(p-p)/75 Ω

Composite video:

VCR, MONITOR OUT:

 

S-video:

VCR, MONITOR OUT:

(Y: luminance):

1 V(p-p)/75 Ω

 

 

(C: chrominance, burst):

0.286 V(p-p)/75 Ω

Component video:

MONITOR OUT:

(Y: luminance):

1 V(p-p)/75 Ω

 

 

(PB/CB, PR/CR):

1 V(p-p)/75 Ω

Synchronization:

Negative

 

 

Signal-to-Noise Ratio:

45 dB

 

 

41

Page 43 Page 45
Image 44
Page 43 Page 45
Contents RX-7022VSL Page RX-7022VSL Table of Contents Front Panel Remote ControlParts Identification Before Installation Putting Batteries in the Remote Control Checking the Supplied AccessoriesGetting Started Replace the coverFM antenna connection Connecting the FM and AM AntennasAM antenna connection Connecting the Speakers Getting StartedConnecting Audio/Video Components Connecting the rear and center speakersConnecting the subwoofer speaker Analog connections Audio component connectionsVideo component connections CD playerCassette deck or CD recorder VCRDBS tuner B TV and/or DBS tuner DVD playerDVD player Connecting the Power Cord Plug the power cord into an AC outletDigital connections Digital output terminalSelecting the Source to Play Turning On the PowerBasic Operations Adjusting the Volume Basic OperationsListening Only with Headphones Turning Off the Power With the Sleep TimerHeadphone mode Changing the Display BrightnessBasic adjustment auto memory Signal and speaker indicators on the displaySignal indicators Speaker indicators Speaker indicators light up whenDigital in Terminals Basic SettingsSetting the Digital Input Basic Settings Selecting the Analog or Digital Input ModeTerminal Setting the Speaker Information RemoteSelecting the Video Input Unit with the current setting Appears on the display Press Control UP 5/DOWN ∞ to select the unitSelect the appropriate speaker distance Speaker sizeSelect the low frequency effect attenuator level To select the appropriate compression LevelCrossover frequency Dynamic range compressionOutput Balance Sound AdjustmentsAdjusting the Front Speakers Reinforcing the Bass Adjusting the ToneAdjusting the Subwoofer Output Level Tuner Operations Tuning in Stations ManuallyUsing Preset Tuning Selecting the FM Reception Mode Creating Realistic Sound Fields Dolby SurroundDTS Digital Surround Typical Multichannel 5.1 ch reproductionDVD Multi Playback Mode DAP Digital Acoustic Processor modesCreating sound field All Channel StereoCreating Realistic Sound Fields About Relations between Speaker Layouts and Surround ModesTurning on or off the Surround modes Selecting the Surround modesPress Surround ON/OFF to Activate Surround modeIf you like to adjust sound, go to step Adjust the speaker output levels -10 to +10 Press Test to check if you can hearEqual level Press Test again to stop the testUsing DAP Modes and All Channel Stereo Press Surround ON/OFF to activate Surround mode Press Surround Mode repeatedly Surround ModeEffect with the current Setting* appears on the display PAVILION-or ALL CH Stereo appears on the displayUsing DVD Multi Playback Mode Activating DVD Multi Playback ModePress DVD Multi Following indications appears On the displayCompu Link Remote Control System Press the play 3 button on the CD playerAutomatic Source Selection Synchronized RecordingAV Compu Link Remote Control System Connections 1 AV Compu Link ConnectionConnections 2 Video Cable Connections CaseAV Compu Link Remote Control System Automatic Selection of TV’s Input ModeAutomatic Power On/Off One-Touch Video PlaySound Adjustment Ex. When you press CDOperating JVC’s Audio/Video Components Operating Audio ComponentsOperating JVC’s Audio/Video Components DVD menu operations Operating Video ComponentsDVD player To change the transmittable signals for operating a TV If there are more than one code listed for your brand of TVOperating Other Manufacturers’ Video Equipment Try to operate your TV by pressing TVTo change the transmittable signals for operating a VCR If there are more than one code listed for your brandTry to operate your VCR by pressing Manufacturers’ codes for Catv converter CodesOperating Other Manufacturers’ Video Equipment Try to operate your DVD player by pressingManufacturers’ codes for VCR Codes Manufacturers’ codes for DVD player CodesTroubleshooting Problem Possible Cause SolutionSpecifications AmplifierGeneral FM tuner IHFAM tuner 0402NHMMDWJEIN

RX-7022VSL specifications

The JVC RX-7022VSL is a versatile and powerful receiver designed to enhance the audio experience in your home entertainment system. This model combines advanced technologies and user-friendly features, making it a popular choice among audio enthusiasts.

One of the standout features of the RX-7022VSL is its robust power output. The receiver provides 100 watts per channel, delivering a clear and dynamic sound across various audio formats. This power output is particularly beneficial for driving larger speakers, ensuring that even the most demanding audio tracks are rendered with precision and clarity.

The RX-7022VSL is equipped with multiple audio inputs, including HDMI, coaxial, and optical connections. This extensive range of inputs allows easy connectivity with various source devices, such as Blu-ray players, gaming consoles, and streaming devices. The receiver also supports multiple audio formats, including Dolby Digital, DTS, and PCM, ensuring optimal compatibility with your existing audio equipment.

One of the key technologies featured in the RX-7022VSL is JVC’s proprietary Digital Signal Processing (DSP). This technology enhances the sound quality by providing advanced audio filtering and sound field options, allowing you to tailor the listening experience to your preferences. The receiver also includes a built-in equalizer, enabling users to adjust the sound profile to suit their audio tastes and room acoustics.

In addition to its audio capabilities, the RX-7022VSL includes a user-friendly remote control, allowing for easy adjustment of settings from across the room. The on-screen display simplifies navigation through various audio modes and settings, making it accessible for users of all skill levels.

The design of the RX-7022VSL is both sleek and functional, with a modern aesthetic that fits well in any home theater setup. The front panel features a clear LED display, rotary knobs for volume and input selection, and dedicated buttons for quick access to commonly used features.

In summary, the JVC RX-7022VSL receiver stands out for its powerful audio performance, versatile connectivity options, and user-friendly interface. With its combination of cutting-edge technology and thoughtful design, it is well-suited for both casual listeners and audiophiles seeking to elevate their home sound experience. Whether you're watching movies, listening to music, or enjoying gaming, the RX-7022VSL delivers a captivating audio experience that enhances any entertainment setup.
Top Page Image Contents