HTC LZC5225 / 965879601, LZC6130 / 965879801, LZ30 / 968999776, LZC5227 / 965879701 For the machine

Page 15

SAFETY

Sparking can occur when working with the battery and the heavy cables of the starter circuit. This can cause battery explosion, fire or eye injury.

Sparking in this circuit can not occur after the chassis cable (normally negative, black) is removed from the battery.

Use protective goggles.

Ensure that the fuel filler cap is mounted tightly and no flammable substances are stored in an open vessel.

Never work with the starter circuit if there is spilled fuel.

WARNING!

Avoid electrical sparking and its consequences by the following routines:

6003-009

Do not smoke when performing maintenance on the battery. The battery can explode and cause serious injury/damage.

• Disconnect the chassis cable from the battery first

 

and reconnect it last.

 

• Do not make a bridge short circuit across the

 

starter relay to run the starter.

 

• Never use the machine indoors or in spaces

 

lacking proper ventilation. The exhaust fumes

 

contain carbon monoxide, an odorless, poisonous,

 

and lethal gas.

 

• Stop to inspect the equipment if you run over or

 

into anything. If necessary, make repairs before

 

starting.

 

• Never make adjustments with the engine running.

 

• The machine is tested and approved only with the

 

equipment originally provided or recommended by

 

the manufacturer. Only use approved repair parts

8009-728

for the machine.

Risk of sparking

• The blades are sharp and can cause cuts and

 

gashes. Wrap the blades or use protective gloves

 

when handling them.

 

• Check the parking brake’s functionality regularly.

 

Adjust and service as necessary.

 

• The mulch blades should only be used in familiar

 

areas when higher quality mowing is desired.

 

• Reduce the risk of fire by removing grass, leaves,

 

and other debris that may have accumulated on

 

the machine.

 

• Allow the machine to cool before putting it in

 

storage.

 

• Regularly clean deck and underside of deck, avoid

 

spraying engine and electrical components with

 

water.

 

 

8011-514

 

Regularly clean deck

 

Husqvarna - 15

Image 15
Contents Operator Manual Page Contents English-4 Introduction Manufacturing Number Good ServiceSymbols and decals Remove key before Safety Safety InstructionsGeneral Operation Never take passengers Slope Operation Personal Safety EquipmentChildren Safe Handling of Gasoline General Maintenance For the machine Transport Spark Arresters Roll over Protection system RopsControls Motion Control Levers Hour meter Tracking knobParking Brake Blade switch Ignition SwitchFuses Refueling Seat adjustment lever Seat LockFuel shut off valve Choke control Throttle controlMower Deck Lifting Lever Pump release valves Cutting height lift pedalOperation TrainingSteering Roll bar and safety belt Before StartingStarting the Engine Depress the control for disengaging the mower deck Press in and turn the ignition key to the start position Return to run position Weak Battery Jumper CablesTo remove cables, reverse order Mower deck’s gauge wheels should be evenly adjusted Ensure that no one is near mower when engaging blade switchRunning Stopping the Engine Operating on HillsMowing Tips Moving by Hand Maintenance Maintenance Replacing battery BatteryIgnition System Safety SystemEngine Cooling Air Intake Throttle CableChoke Cable Air Filter Air filter housing and filterEngine Oil Cooler Fuel Pump Air Filter Fuel FilterChecking the V-belts Deck beltTo replace deck belt Tire Pressures Pump beltCutter Blades Blade ReplacementAdjusting Cutting Height Adjusting the Mower DeckCaster Wheels CleaningUse protective glasses when cleaning and washing Removal and installation of caster wheelLubrication Schedule LubricationHydraulic System, Oil Level Lubricating the CablesShaft Bushings and Linkage Following the Lubrication ScheduleChanging the Engine Oil Engine OilChecking Oil Level Oil Type Oil RecommendationsFront Wheel Bearings Mower Deck Height AdjusterThrottle and Choke Cables, Lever Bearings Front Wheel MountSteering Control Shafts Mower Deck StrutsOil Filter Problem Cause Troubleshooting guideTroubleshooting guide Service StorageWinter Storage Wiring Diagram Technical Data LZC5225 LZC5227 EngineTransmission LZC5225 LZC5227 Frame DimensionLZC6130 LZ30 Engine LZC6130 LZ30 Frame Metric Standard Hardware AccessoriesTorque Specifications Standard HardwareCE requirements USA requirementsLimited Warranty WarrantyService Journal Delivery ServiceAction Date, mtr reading, stamp, sign After the First 5-8 Hours Hour Service Service Journal Service Journal Service Journal At Least Once Each Year Action Page 115 138927 R01 06/01/09