LUBRICATION
Oil Recommendations
Using the proper type and weight of oil in the crankcase is extremely important. So is checking oil daily and changing oil regularly. Failure to use the correct oil, or using dirty oil, causes premature engine wear and failure.
Oil Type
Use high quality detergent oil of API (American Petroleum Institute) service class SG, SH, SJ or higher. Select the viscosity based on the air temperature at the time of operation.
IMPORTANT INFORMATION
Using other than service class SG, SH, SJ or higher oil or extending oil change intervals longer than recommended can cause engine damage.
IMPORTANT INFORMATION
Synthetic oils meeting the listed classifications may be used with oil changes performed
at the recommended intervals. However to allow piston rings to properly seat, a new or rebuilt engine should be operated for at least 50 hours using standard petroleum based oil before switching to synthetic oil.
A logo or symbol on oil containers identifies the API service class and SAE viscosity grade.
Temperature range expected before next oil change
*Use of synthetic oil having
**Synthetic oils will provide better starting in extreme cold below
Viscosity grades table
Husqvarna - 53