HTC LZ30 / 968999776, LZC6130 / 965879801, LZC5227 / 965879701 manual Troubleshooting guide

Page 57

troubleshooting guide

 

Problem

Cause

 

 

 

 

 

 

The engine seems weak.

Clogged air filter.

 

 

Fouled spark plugs.

 

 

Carburetor incorrectly adjusted.

 

 

 

 

 

 

The engine overheats.

Clogged air intake or cooling fins.

 

 

Engine overloaded.

 

 

• Poor ventilation around engine.

 

 

• Defective engine speed regulator.

 

 

• Soot in the combustion chamber.

 

 

• Too little or no oil in the engine.

 

 

Fouled spark plug.

 

 

Pre-ignition incorrect.

 

 

 

 

 

 

Battery not charging.

Poor contact with battery terminal cable

 

 

 

connectors.

 

 

 

 

 

 

The machine moves slowly, unevenly, or not at all.

Parking brake on.

 

 

• Bypass valve on pump open.

 

 

• Drive belt for the transmission gears slack or has

 

 

 

come off.

 

 

Defective hydraulic system.

 

 

• Air in hydraulic system.

 

 

 

 

 

 

Mower deck not engaging.

Drive belt for the mower deck has come loose.

 

 

• Contact for the electromagnetic coupling has

 

 

 

loosened.

 

 

• The blade switch is faulty or has come loose, from

 

 

 

the cable contact.

 

 

• The fuse has blown.

 

 

 

 

 

 

Transaxle leaks oil.

Damaged seals, housing, or gaskets.

 

 

• Air trapped in hydraulic system.

 

 

 

 

 

 

Uneven mowing results.

Different air pressure in the tires on the left and

 

 

 

right sides.

 

 

Bent blades.

 

 

• The suspension for the mower deck is uneven.

 

 

• The blades are dull.

 

 

• Driving speed too high.

 

 

• The grass is too long.

 

 

• Grass collected under the mower deck.

 

 

 

 

 

The machine vibrates.

The blades are loose.

 

 

• The blades are incorrectly balanced.

• The engine is loose.

Husqvarna - 57

Image 57
Contents Operator Manual Page Contents English-4 Introduction Manufacturing Number Good ServiceSymbols and decals Remove key before Safety Safety InstructionsGeneral Operation Never take passengers Slope Operation Personal Safety EquipmentChildren Safe Handling of Gasoline General Maintenance For the machine Transport Spark Arresters Roll over Protection system RopsControls Motion Control Levers Hour meter Tracking knobParking Brake Blade switch Ignition SwitchFuses Refueling Seat adjustment lever Seat LockFuel shut off valve Choke control Throttle controlMower Deck Lifting Lever Pump release valves Cutting height lift pedalOperation TrainingSteering Roll bar and safety belt Before StartingStarting the Engine Depress the control for disengaging the mower deck Press in and turn the ignition key to the start position Return to run position Weak Battery Jumper CablesTo remove cables, reverse order Mower deck’s gauge wheels should be evenly adjusted Ensure that no one is near mower when engaging blade switchRunning Stopping the Engine Operating on HillsMowing Tips Moving by Hand Maintenance Maintenance Replacing battery BatteryIgnition System Safety SystemEngine Cooling Air Intake Throttle CableChoke Cable Air Filter Air filter housing and filterEngine Oil Cooler Fuel Pump Air Filter Fuel FilterChecking the V-belts Deck beltTo replace deck belt Tire Pressures Pump beltCutter Blades Blade ReplacementAdjusting Cutting Height Adjusting the Mower DeckUse protective glasses when cleaning and washing CleaningRemoval and installation of caster wheel Caster WheelsLubrication Schedule LubricationShaft Bushings and Linkage Lubricating the CablesFollowing the Lubrication Schedule Hydraulic System, Oil LevelChanging the Engine Oil Engine OilChecking Oil Level Oil Type Oil RecommendationsThrottle and Choke Cables, Lever Bearings Mower Deck Height AdjusterFront Wheel Mount Front Wheel BearingsSteering Control Shafts Mower Deck StrutsOil Filter Problem Cause Troubleshooting guideTroubleshooting guide Service StorageWinter Storage Wiring Diagram Technical Data LZC5225 LZC5227 EngineTransmission LZC5225 LZC5227 Frame DimensionLZC6130 LZ30 Engine LZC6130 LZ30 Frame Torque Specifications AccessoriesStandard Hardware Metric Standard HardwareCE requirements USA requirementsLimited Warranty WarrantyService Journal Delivery ServiceAction Date, mtr reading, stamp, sign After the First 5-8 Hours Hour Service Service Journal Service Journal Service Journal At Least Once Each Year Action Page 115 138927 R01 06/01/09