HTC LZ30 / 968999776, LZC6130 / 965879801 manual Blade switch, Ignition Switch, Fuses

Page 21

CONTROLS

Blade switch

To engage the mower deck, pull the blade switch knob out. The mower blades are disengaged when the knob is pressed down fully.

8011-510

Blade Switch

Ignition Switch

The ignition key is placed on the control panel and is used to start and stop the engine.

WARNING!

Do not run the starter for more than five seconds each time. If the engine does not start, wait 10 seconds before retrying.

Fuses

The fuses are located in a holder to the left of the hydraulic tank. They are flat pin fuses of the same type used in automobiles.

There are three fuses as well as a socket for one spare fuse.

Fuse ratings and functions:

•20 A, Primary fuse.

•7.5 A, Mower deck coupling.

•7.5 A, Accessory outlet.

•Socket for spare fuse.

8011-748

Ignition Switch

8011-746

Fuses

Husqvarna - 21

Image 21

Contents Operator Manual Page Contents English-4 Introduction Manufacturing Number Good ServiceSymbols and decals Remove key before Safety Safety InstructionsGeneral Operation Never take passengers Slope Operation Personal Safety EquipmentChildren Safe Handling of Gasoline General Maintenance For the machine Transport Spark Arresters Roll over Protection system RopsControls Motion Control Levers Hour meter Tracking knobParking Brake Blade switch Ignition SwitchFuses Refueling Seat adjustment lever Seat LockFuel shut off valve Choke control Throttle controlMower Deck Lifting Lever Pump release valves Cutting height lift pedalOperation TrainingSteering Roll bar and safety belt Before StartingStarting the Engine Depress the control for disengaging the mower deck Press in and turn the ignition key to the start position Return to run position Weak Battery Jumper CablesTo remove cables, reverse order Mower deck’s gauge wheels should be evenly adjusted Ensure that no one is near mower when engaging blade switchRunning Stopping the Engine Operating on HillsMowing Tips Moving by Hand Maintenance Maintenance Replacing battery BatteryIgnition System Safety SystemEngine Cooling Air Intake Throttle CableChoke Cable Air Filter Air filter housing and filterEngine Oil Cooler Fuel Pump Air Filter Fuel FilterChecking the V-belts Deck beltTo replace deck belt Tire Pressures Pump beltCutter Blades Blade ReplacementAdjusting Cutting Height Adjusting the Mower DeckUse protective glasses when cleaning and washing CleaningRemoval and installation of caster wheel Caster WheelsLubrication Schedule LubricationShaft Bushings and Linkage Lubricating the CablesFollowing the Lubrication Schedule Hydraulic System, Oil LevelChanging the Engine Oil Engine OilChecking Oil Level Oil Type Oil RecommendationsThrottle and Choke Cables, Lever Bearings Mower Deck Height AdjusterFront Wheel Mount Front Wheel BearingsSteering Control Shafts Mower Deck StrutsOil Filter Problem Cause Troubleshooting guideTroubleshooting guide Service StorageWinter Storage Wiring Diagram Technical Data LZC5225 LZC5227 EngineTransmission LZC5225 LZC5227 Frame DimensionLZC6130 LZ30 Engine LZC6130 LZ30 Frame Torque Specifications AccessoriesStandard Hardware Metric Standard HardwareCE requirements USA requirementsLimited Warranty WarrantyService Journal Delivery ServiceAction Date, mtr reading, stamp, sign After the First 5-8 Hours Hour Service Service Journal Service Journal Service Journal At Least Once Each Year Action Page 115 138927 R01 06/01/09