HTC LZC5227 / 965879701, LZC6130 / 965879801, LZ30 / 968999776 manual Return to run position

OPERATION

10.When the engine starts, immediately release the ignition key back to the run position.

IMPORTANT INFORMATION

Do not run the starter for more than 5 seconds each time. If the engine does not start, wait about 10 seconds before retrying.

11.Push the choke control in gradually when the engine has started.

12.Set the desired engine speed with the throttle. Allow the engine to run at a moderate speed, “half throttle”, for 3-5 minutes before loading it too heavily. USE FULL THROTTLE WHEN MOWING

(no choke).

WARNING!

Engine exhaust and certain vehicle components contain or emit chemicals considered to cause cancer, birth defects or other reproductive system damage. The engine exhaust contains carbon monoxide, which is a odorless, colorless, poisonous gas. Do not use the machine in enclosed spaces.

8011-743

Return to run position

8011-508

Press in the choke control

8011-754

Set the engine speed

30 - Husqvarna