HTC LZC5225 / 965879601 Service Journal, Delivery Service, Action Date, mtr reading, stamp, sign

Page 67

SERVICE JOURNAL

Action

Date, mtr reading, stamp, sign

Delivery Service

1. Charge the battery.

2. Adjust the tire pressure of all wheels to 15 PSI (1 bar).

3. Mount the steering controls in the normal position.

4. Connect the contact box to the cable for the seat’s safety switch.

5. Check that the right amount of oil is in the engine.

6. Adjust the position of the steering controls.

7. Fill with fuel and open the fuel shut off valve.

8.Start the engine.

9.Check that there is drive to both wheels.

10.Check the mower deck adjustment.

11.Check:

The safety switch for the parking brake. The safety switch for the mower deck. The safety switch in the seat.

 

The safety switch in the steering controls.

 

 

Parking brake functionality.

 

 

Driving forward.

 

 

Driving backward.

 

 

Engaging the blades.

 

12.

Check the idle speed

 

13.

Check the engine high idle speed

 

14.

Inform the customer about:

Delivery service has been carried out.

 

The need and advantages of following the service schedule.

 

No remaining notes.

 

The need and advantages of leaving the machine

 

Certified:

 

for service every 300 hours.

 

 

 

The effects of service and maintaining a service journal on

 

 

the machine’s resale value.

 

 

Application areas for Mulching.

 

15.

Fill in the sales papers, etc.

 

Husqvarna - 67

Image 67
Contents Operator Manual Page Contents English-4 Introduction Manufacturing Number Good ServiceSymbols and decals Remove key before Safety Instructions SafetyGeneral Operation Never take passengers Slope Operation Personal Safety EquipmentChildren Safe Handling of Gasoline General Maintenance For the machine Transport Spark Arresters Roll over Protection system RopsControls Motion Control Levers Tracking knob Hour meterParking Brake Ignition Switch Blade switchFuses Refueling Seat Lock Seat adjustment leverFuel shut off valve Throttle control Choke controlMower Deck Lifting Lever Pump release valves Cutting height lift pedalTraining OperationSteering Before Starting Roll bar and safety beltStarting the Engine Depress the control for disengaging the mower deck Press in and turn the ignition key to the start position Return to run position Jumper Cables Weak BatteryTo remove cables, reverse order Ensure that no one is near mower when engaging blade switch Mower deck’s gauge wheels should be evenly adjustedRunning Stopping the Engine Operating on HillsMowing Tips Moving by Hand Maintenance Maintenance Replacing battery BatteryIgnition System Safety SystemThrottle Cable Engine Cooling Air IntakeChoke Cable Air Filter Air filter housing and filterEngine Oil Cooler Fuel Pump Air Filter Fuel FilterDeck belt Checking the V-beltsTo replace deck belt Tire Pressures Pump beltCutter Blades Blade ReplacementAdjusting Cutting Height Adjusting the Mower DeckCaster Wheels CleaningUse protective glasses when cleaning and washing Removal and installation of caster wheelLubrication Schedule LubricationHydraulic System, Oil Level Lubricating the CablesShaft Bushings and Linkage Following the Lubrication ScheduleChanging the Engine Oil Engine OilChecking Oil Level Oil Type Oil RecommendationsFront Wheel Bearings Mower Deck Height AdjusterThrottle and Choke Cables, Lever Bearings Front Wheel MountMower Deck Struts Steering Control ShaftsOil Filter Problem Cause Troubleshooting guideTroubleshooting guide Storage ServiceWinter Storage Wiring Diagram LZC5225 LZC5227 Engine Technical DataTransmission LZC5225 LZC5227 Frame DimensionLZC6130 LZ30 Engine LZC6130 LZ30 Frame Metric Standard Hardware AccessoriesTorque Specifications Standard HardwareCE requirements USA requirementsLimited Warranty WarrantyDelivery Service Service JournalAction Date, mtr reading, stamp, sign After the First 5-8 Hours Hour Service Service Journal Service Journal Service Journal At Least Once Each Year Action Page 115 138927 R01 06/01/09