Honeywell HW3000, L, hw400 service manual Carburetor

Page 49

CARBURETOR

9.7 CARBURETOR

WARNING

Fuel and its vapors are extremely flammable and explosive under certain conditions.

•Refuel generator only outdoors, in a well-ventilated area.

•NEVER enclose the generator in any structure.

•Keep generator at least 6 feet (2 meters) away from buildings, other equipment, and combustible materials during oper- ation.

•NEVER fill fuel tank while the engine is running. Turn generator OFF and allow to cool before filling with fuel.

•NEVER smoke or allow flames or sparks near the generator or where gasoline is stored.

•NEVER overfill the fuel tank (there should be no fuel in the filler neck). After refueling, tighten the fuel cap securely.

•Be careful not to spill fuel when refueling. Spilled fuel or fuel vapor may ignite. If any fuel is spilled, the area must be dry before starting the engine.

•Avoid repeated or prolonged contact with skin or breathing of vapor.

A—FLOAT VALVE

Check for worn valve or weak spring before installation.

B—FLOAT

Check for smooth movement after installation.

C—DRAIN SCREW

Clean with compressed air and check for leaks after installation.

D—SET BOLT

Check for any sign of fuel leakage after installation.

E—FUEL CUTOUT SOLENOID

Check continuity between the double green wires of the solenoid valve. If there no continuity, replace solenoid.

NOTE: Not present on HW3000 or HW3000L models.

F—MAIN JET

Clean with compressed air before installation.

G—MAIN NOZZLE

Clean with compressed air before installation.

I

H

A

B

G

F

H—O-RING

Check for correct installation.

C

D

I— CARBURETOR BODY

Clean internal passages and orifices with compressed air before installa- tion.

E

Honeywell Portable Electrical Generator Service Manual

www.honeywellgenerators.com

9-7

Page 48 Page 50
Image 49
Page 48 Page 50
Contents Read and Save These Instructions Page Contents This page Intentionally Left Blank Safety Messages Important Safety InstructionsArds Electric Shock Hazards Safety MessagesWarranties Northshore Power Systems Consumer Limited WarrantyWarranties Warranty StatementQuestions Northshore Power Systems Replacement Parts Limited Warranty Specifications Specifications and Wiring DiagramsBolt and Fastener Torque Information Bolt and Fastener Torque InformationWiring Diagrams Wiring DiagramsHW4000 & HW4000L HW5500 & HW5500L HW5500E & HW5500EL HW6200 & HW6200L HW7000E, HW7000EL, HW7500E, & HW7500EL Components This page Intentionally Left Blank Required Tools Preparing for ServiceTransporting Generator This page Intentionally Left Blank Operation Service Repair Time Analysis & Flat Rate ScheduleMisc Service Repair Time AnalysisConsumer Maintenance Schedule MaintenanceConsumer Maintenance Schedule AIR Filter Maintenance AIR Filter MaintenanceTer more frequently Remove foam air filters Coat the air filter with clean engine oilSqueeze out excess oil Cleaning Fuel Sediment CUP Cleaning Fuel Sediment CUPSpark Plug Service Cleaning Spark Arrestor Screen Cleaning Spark Arrestor ScreenValve Lash Governor AdjustmentValve Lash Battery Service Battery ServiceXtreme Yuasa 12N14-3ATroubleshooting Electrical Diagnostics HW3000/L Models Electrical Diagnostics HW3000/L ModelsAlternator Refer to Illustrations on Brush Assembly Electrical Diagnostics ALL Models Except HW3000/L Electrical Diagnostics ALL Models Except HW3000/L7000 Refer to Illustrations on AVR TAP Engine Diagnostics ALL Models Engine Diagnostics ALL ModelsControl Panel Service and DisassemblyNm 3 lb. ft Engine and Alternator See WHEEL, LEG, & Handle ASSEMBLY,Engine and Alternator Cylinder Head Bolts 48 Nm 35 lb. ftAlternator AlternatorAlso known as Automatic Voltage Regulator or AVR Fuel Tank System Fuel Tank SystemEvaporative Emissions Control System Evaporative Emissions Control SystemNm 1.5 lb. ft Muffler MufflerCarburetor CarburetorStarting System Starting SystemStarter Solenoid Terminal Nut 6 Nm 4 lb. ft Check for continuityRecoil Starter Install with recoil starter handle position as shownRecoil Starter Check for wear or damageInstall with the recoil starter handle position as shown Remove and install with the recoil starter assemblyFAN Cover FAN CoverWHEEL, LEG, & Handle Assembly HW3000/L Models WHEEL, LEG, & Handle Assembly25 Nm 18 lb. ft WHEEL, LEG, & Handle Assembly ALL Models Except HW3000/LIndex Northshore Power Systems, LLC

hw400, HW3000, L specifications

Honeywell is renowned for its innovative solutions in various domains, including manufacturing, aerospace, and building technologies. Among its many offerings, the Honeywell L, HW3000, and HW400 series stand out for their advanced features, technologies, and characteristics, tailored to meet the evolving demands of industries worldwide.

The Honeywell L Series is recognized for its versatility and reliability in process control applications. Designed to accommodate a range of industrial needs, these controllers provide enhanced flexibility with modifiable configurations that suit diverse operating conditions. With advanced user interfaces, intuitive programming options, and robust execution capabilities, they optimize performance while simplifying system maintenance.

The HW3000 series takes innovation a notch higher, featuring cutting-edge process automation technologies. It leverages advanced algorithms and communication protocols, facilitating seamless integration with existing systems and enhancing overall efficiency. This series is designed for high-performance operations, offering real-time data monitoring and control. The HW3000's modular architecture allows for easy upgrades and scalability, making it ideal for businesses planning for growth.

On the other hand, the Honeywell HW400 series is engineered for precision and reliability. It is equipped with state-of-the-art sensors and control mechanisms that ensure optimal performance in demanding environments. The HW400 model emphasizes sustainability, incorporating energy-efficient technologies that align with global initiatives for greener operations. Users benefit from advanced diagnostics and predictive maintenance capabilities, which minimize downtime and enhance productivity.

All three series—L, HW3000, and HW400—share a commitment to security and data integrity. Honeywell incorporates cybersecurity measures to protect sensitive information and facilitate secure communications. Moreover, they embrace a user-friendly design philosophy, ensuring that operators can easily interface with the systems, regardless of their technical background.

In summary, Honeywell's L, HW3000, and HW400 series highlight the company’s dedication to innovation, efficiency, and reliability. With advanced technologies and robust features, these products cater to a wide range of industrial applications, making them essential tools for businesses aiming to optimize their operations. Whether for process control, automation, or precision management, Honeywell continues to provide solutions that drive success in the modern industrial landscape.
Top Page Image Contents