Honeywell hw400, L, HW3000 Battery Service, Xtreme, Yuasa 12N14-3A, Remove spark plug cap

Page 32

BATTERY SERVICE

7.9 BATTERY SERVICE

To ensure the battery remains charged, it is recom- mended that the generator is started every three months. If the generator is stored for more than a year without run- ning, a battery charger may be required to recharge the generator battery.

Recommended Battery Replacement: 101536A

Xtreme

XTAX14AHL-BS

 

 

Yuasa

12N14-3A

 

 

TABLE 7-6.Replacement Battery Equivalents to 101536A

To replace battery:

1.Remove spark plug cap.

FIGURE 7-19:Spark Plug Cap Removal

2.Loosen and remove nuts on retaining plate; slide retaining plate off support rods.

FIGURE 7-20:Electric Start Battery—Remove Retaining Plate

3.Tip battery slightly forward.

4.Disconnect the black negative (-) battery lead remov- ing the bolt and nut.

FIGURE 7-21:Electric Start Battery—Lead Connection

5.Disconnect the red positive (+) battery lead removing the bolt and nut.

6.Remove the battery.

NOTE:

Dispose of used battery according to guidelines estab- lished by your local or state government.

7.Place the new battery in the generator frame.

8.Connect the red positive (+) battery lead to the posi- tive (+) post on the battery; install bolt, nut, and boot.

9.Connect the black negative (-) battery lead to the neg- ative (-) post on the battery; install bolt, nut, and boot.

10.Reinstall retaining plate; tighten bolts and nuts.

11.Reinstall spark plug cap.

7-8

www.honeywellgenerators.com

Honeywell Portable Electrical Generator Service Manual

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Read and Save These Instructions Page Contents This page Intentionally Left Blank Ards Important Safety InstructionsSafety Messages Safety Messages Electric Shock HazardsNorthshore Power Systems Consumer Limited Warranty WarrantiesWarranty Statement WarrantiesQuestions Northshore Power Systems Replacement Parts Limited Warranty Specifications and Wiring Diagrams SpecificationsBolt and Fastener Torque Information Bolt and Fastener Torque InformationWiring Diagrams Wiring DiagramsHW4000 & HW4000L HW5500 & HW5500L HW5500E & HW5500EL HW6200 & HW6200L HW7000E, HW7000EL, HW7500E, & HW7500EL Components This page Intentionally Left Blank Transporting Generator Preparing for ServiceRequired Tools This page Intentionally Left Blank Service Repair Time Analysis & Flat Rate Schedule OperationService Repair Time Analysis MiscMaintenance Consumer Maintenance ScheduleConsumer Maintenance Schedule Ter more frequently AIR Filter MaintenanceAIR Filter Maintenance Squeeze out excess oil Coat the air filter with clean engine oilRemove foam air filters Spark Plug Service Cleaning Fuel Sediment CUPCleaning Fuel Sediment CUP Cleaning Spark Arrestor Screen Cleaning Spark Arrestor ScreenValve Lash Governor AdjustmentValve Lash Battery Service Battery ServiceXtreme Yuasa 12N14-3ATroubleshooting Electrical Diagnostics HW3000/L Models Electrical Diagnostics HW3000/L ModelsAlternator Refer to Illustrations on Brush Assembly Electrical Diagnostics ALL Models Except HW3000/L Electrical Diagnostics ALL Models Except HW3000/L7000 Refer to Illustrations on AVR TAP Engine Diagnostics ALL Models Engine Diagnostics ALL ModelsNm 3 lb. ft Service and DisassemblyControl Panel See WHEEL, LEG, & Handle ASSEMBLY, Engine and AlternatorEngine and Alternator Cylinder Head Bolts 48 Nm 35 lb. ftAlso known as Automatic Voltage Regulator or AVR AlternatorAlternator Fuel Tank System Fuel Tank SystemNm 1.5 lb. ft Evaporative Emissions Control SystemEvaporative Emissions Control System Muffler MufflerCarburetor CarburetorStarting System Starting SystemStarter Solenoid Terminal Nut 6 Nm 4 lb. ft Check for continuityInstall with recoil starter handle position as shown Recoil StarterRecoil Starter Check for wear or damageRemove and install with the recoil starter assembly Install with the recoil starter handle position as shownFAN Cover FAN CoverWHEEL, LEG, & Handle Assembly WHEEL, LEG, & Handle Assembly HW3000/L ModelsWHEEL, LEG, & Handle Assembly ALL Models Except HW3000/L 25 Nm 18 lb. ftIndex Northshore Power Systems, LLC

hw400, HW3000, L specifications

Honeywell is renowned for its innovative solutions in various domains, including manufacturing, aerospace, and building technologies. Among its many offerings, the Honeywell L, HW3000, and HW400 series stand out for their advanced features, technologies, and characteristics, tailored to meet the evolving demands of industries worldwide.

The Honeywell L Series is recognized for its versatility and reliability in process control applications. Designed to accommodate a range of industrial needs, these controllers provide enhanced flexibility with modifiable configurations that suit diverse operating conditions. With advanced user interfaces, intuitive programming options, and robust execution capabilities, they optimize performance while simplifying system maintenance.

The HW3000 series takes innovation a notch higher, featuring cutting-edge process automation technologies. It leverages advanced algorithms and communication protocols, facilitating seamless integration with existing systems and enhancing overall efficiency. This series is designed for high-performance operations, offering real-time data monitoring and control. The HW3000's modular architecture allows for easy upgrades and scalability, making it ideal for businesses planning for growth.

On the other hand, the Honeywell HW400 series is engineered for precision and reliability. It is equipped with state-of-the-art sensors and control mechanisms that ensure optimal performance in demanding environments. The HW400 model emphasizes sustainability, incorporating energy-efficient technologies that align with global initiatives for greener operations. Users benefit from advanced diagnostics and predictive maintenance capabilities, which minimize downtime and enhance productivity.

All three series—L, HW3000, and HW400—share a commitment to security and data integrity. Honeywell incorporates cybersecurity measures to protect sensitive information and facilitate secure communications. Moreover, they embrace a user-friendly design philosophy, ensuring that operators can easily interface with the systems, regardless of their technical background.

In summary, Honeywell's L, HW3000, and HW400 series highlight the company’s dedication to innovation, efficiency, and reliability. With advanced technologies and robust features, these products cater to a wide range of industrial applications, making them essential tools for businesses aiming to optimize their operations. Whether for process control, automation, or precision management, Honeywell continues to provide solutions that drive success in the modern industrial landscape.
Top Page Image Contents