OPERATING
Operating
Daily Operating Checklist
❏Test safety systems.
❏Check tire pressure.
❏Check fuel level.
❏Check engine oil level.
❏Remove grass and debris from machine.
❏Clean air intake screen.
❏Check area below machine for leaks.
Console Controls
|
|
|
|
|
| H |
C |
|
|
|
|
| I |
|
|
|
|
|
| C |
| D | G | B | A | D |
|
F | E |
|
|
| E | F |
|
|
|
|
|
| MX9263 |
A- Speed Control Lever
B- Tracking Adjustment Knob
C- Operator Presence Control Lever
D- Neutral Lock Lever
E- Handlebar Grip
F- Steering/Reverse Control Grip Lever
G- Throttle Lever/Choke Control (choke may be individual control on some models)
H- PTO/Clutch Switch
I- Key Switch
Miscellaneous Controls
A
BA
MX18837 MX9264
A- Transmission Drive/Bypass/Park Brake Selector
B- Fuel Shutoff Valve
Testing Safety Systems
cCAUTION: Avoid injury! Engine exhaust fumes
contain carbon monoxide and can cause serious illness or death.
Move the vehicle to an outside area before running the engine.
Do not run an engine in an enclosed area without adequate ventilation.
•Connect a pipe extension to the engine exhaust pipe to direct the exhaust fumes out of the area.
•Allow fresh outside air into the work area to clear the exhaust fumes out.
Use the following checkout procedure to check for normal operation of machine.
If there is a malfunction during one of these procedures, do not operate machine. See your Great Dane dealer for service.
Operating - 7