SAFETY
Understanding The Machine Safety Labels | CAUTION | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The machine safety labels shown in this section are placed in important areas on your machine to draw attention to potential safety hazards.
On your machine safety labels, the words DANGER, WARNING, and CAUTION are used with this
The operator’s manual also explains any potential safety hazards whenever necessary in special safety messages that are identified with the word, CAUTION, and the safety- alert symbol.
DANGER/POISON
MX9292 MX9261
•Shield eyes, explosive gases can cause blindness or injury.
•No sparks, flames, smoking.
•Sulfuric acid can cause blindness or severe burns.
•Flush eyes immediately with water, get medical help fast.
•Keep out of the reach of children.
•Do not tip.
•Keep vent caps tight and level.
MX9295 M9261
•This product is designed for professional and commercial users.
•Operation training is required.
•Carefully read safety instructions.
•Know function of controls before operating.
•Practice with cutter blades off until confident.
•Clear mowing area of all debris.
•Keep all guards, covers and shields in place while working.
•Do not disable or bypass any safety device.
•Always wear safety goggles while operating.
•Always park machine on level surface.
•Avoid contact with cutter blades. They may be rotating.
•Keep children and others clear from area.
•Set ground speed control to safe speed.
•Slowly and smoothly move speed control levers to start and stop machine.
•Reduce speed and avoid sharp turns.
•Always hold on to safety bar while operating.
•Be careful on slopes, do not mow where stability or traction is in doubt.
•To obtain additional operator manual and safety instructions, contact Great Dane dealer or write to: Great Dane Power Equipment, P.O. Box 33009, Raleigh, NC
Safety - 1