ACTIVATING THE RC3200B
When the RC3200B is switched on for the first time or when it is reset, the Introduction screen appears for a few seconds. The RC3200B then automatically switches to the Home screen that displays all available devices on your RC3200B. You can return to this Home screen from within other screens by pressing the Home button.
PAGE 1/4
wed Jun 01 | 4:40pm |
1/4 Home
TURNING ON THE DISPLAY AND THE BACKLIGHT
RC3200B’s display can be activated in two different ways: Tap the LCD touch screen gently with your finger or a blunt, soft object like a pencil eraser.
The display is activated.
1. Press the Backlight (ˆ) button.
The display and the backlight are activated. If the LCD touch screen stays blank or becomes black when turning on the display, read the next section “CHANGING THE LCD
CONTRAST” to adjust the contrast of the LCD touch screen.
Notes:
•RC3200B has a timeout feature: the LCD touch screen and the backlight automatically turn off to save power.
•Refer to “ADJUSTING THE SETTINGS” on page 17 to adjust the timeout for the LCD and the backlight.
THE BATTERY STATUS
The battery icon | indicates the status of your |
batteries. |
|
When the battery status is low, the low battery icon appears at the top of the LCD touch screen. You can still operate your devices, but you cannot adjust the settings, learn commands or record macros anymore.
OPERATING DEVICES
To operate devices on your RC3200B you have to switch to the Home screen.
This screen displays the available devices such as TV, VCR, DVD, Amp, etc.
ACTIVATING THE HOME SCREEN
Press the Home button.
The Home screen appears, showing the available devices on the RC3200B.
ENGLISH
PAGE 2/4
wed Jun 01 | 4:40pm |
2/4 Home
CHANGING THE LCD CONTRAST
Hold
Press
SELECTING A DEVICE ON THE HOME SCREEN
Tap the soft button of the device you want to operate. The first page of the selected device appears. Use the page up and page down buttons to go to another page of the device.
You can operate devices using the buttons on your RC3200B:
•Soft buttons (touch screen buttons);
•Hard buttons.
PAGE 3/4
wed Jun 01 | 4:40pm |
3/4 Home
PAGE 4/4
wed Jun 01 4:40pm
4/4 Home
1. Press and hold the Backlight (ˆ) button. The screen lights up.
2. While still holding the Backlight (ˆ) button, press the page up button once to increase the LCD contrast one level.
The LCD contrast is adjusted one level up. or press the page down button once to decrease the LCD contrast one level. The LCD contrast is adjusted one level down.
3. Release the Backlight (ˆ) button when the contrast is satisfactory. The LCD contrast can be adjusted 16 levels.
Notes:
•To adjust the contrast multiple levels, you have press the page up or page down button multiple times.
•When you press and hold the page up or page down button, the LCD contrast will only change one level.
USING THE SOFT BUTTONS
By tapping the soft buttons on the LCD touch screen you can send IR commands to the device you have selected.
The name of the active device is indicated at the top of the LCD touch screen.
Note:
•You can operate the soft buttons in the same way as you would operate hard buttons on a conventional remote control. If you keep the soft button pressed instead of tapping it, the RC3200B keeps sending the IR command.
11