Marantz SR9600 manual Third Setup, Revert, To Exit Setup Mode, Adjust the Time

Page 20

ENGLISH

Adjust the Time

1. Tap “+” or “–” once to adjust the time 1 minute up or down.

2. Press and hold “+” or “–” to adjust the time more rapidly. The time will increase or decrease in 30 minute increments.

The RC3200B will immediately reflect the time change at the top of the screen.

THIRD SETUP PAGE

RC3200B Information

3/3wedJunSetup01 4:40pm

Calibrate

This page contains information that may be important to the dealer in case of a defect.

The following information is displayed on this screen:

•Free memory (in percentage), which gives you an indication on how much memory is left to (further) customize the RC3200B.

•Boot version

•Application version

•Configuration file

CALIBRATE

 

3. Calibration is successful.

Calibrate the LCD touch screen if the position you

 

touch on the screen does not match the intended

 

display position.

 

1. Tap the Calibrate.

Calibrate

A message screen appears that “Touch the

Calibration

top left corner”.

succeeded

 

 

Calibrate

Touch the

top left corner

Cancel

Tap the + point.

2. A message screen appear that “Touch the

button right corner”.

Touch the

bottom right corner

Cancel

Tap the + point.

REVERT

Warning:

•When you revert the RC3200B, all customization is lost permanently. You lose all RC3200B settings, learned codes and recorded macros.

By tapping the Revert, the RC3200B will be returned to the default configuration. Reverting to the original configuration restores the RC3200B to its initial state. You might have to revert when you notice that scrolling through pages is slowing down. This may occur if you have added a lot of commands to the RC3200B.

1. Tap the Revert.

A message screen appears, asking you to

confirm or cancel the revert process.

2. Press OK or Cancel.

TO EXIT SETUP MODE

1. Press the Mode button. The Mode screen appears.

2. Tap the Mode you want to go to. The RC3200B

switches to this mode. See also “WORKING

WITH MODE”. (See page 17)

18

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Model SR9600 User Guide Additional Safety Information Read Before Operating EquipmentOperate normally, or has been dropped ICES-003 La norme NMB-003 du CanadaTable of Contents Introduction PrecautionsC. Boundary Gain Compensation DescriptionA. Advanced Speaker Array License from SRS Labs, Inc TruBass, SRS, Symbol are trademarks SRS Labs, IncAbout Dolby Pro Logic Features THX Ultra certifiedCurrent feedback 7 ch amplifier Link Transmission FormatsAccessories Remote control unit RC3200BFront Panel ¡4SIGNAL Format and Tuner indicators Disp Display Off indicatorSurround mode / i.LINK indicator Sleep timer indicatorRear Panel VCR2/DVD-RMulti SPEAKER/SPEAKER C AC InletAC Outlets Monitor OUTLoading Batteries REMOTE-CONTROLLABLE RangeActivating the RC3200B Operating DevicesSurround Mode 1 page 2/8 Surround Mode 2 page 3/8Surround Mode 3 page 4/8 Mode page 5/8Multi Room A/B Multi Room A/B page 1/6DC Trigger page 8/8 DVD, TV, CD VCR1, DSS, CD-R VCR2, LD, Tape AUX1, AUX2ST/M Tuner 1/2 Recording MacrosAM/FM RDS PTYShow the SR9600 Status on RC3200BStatus Multiroom a StatusAdjusting the Settings First SetupSecond Setup Working with ModesThird Setup To Exit Setup ModeAdjust the Time RevertTip Learning CommandsLearn Sequence RC3200B Setup Cleaning RC3200BHOW to Reset the RC3200B Important NoticesSpeaker Placement Connecting SpeakersConnecting a Subwoofer Connecting Speaker WireConnecting Audio Components Connecting Digital Audio ComponentsConnecting Video Components Video signal for the Video jacks isConventional composite video signal Video jackSelect an input source from the OSD menu system. See Connecting Hdmi DevicesHdmi Jack Connecting the Remote Control Jacks Connecting Multichannel Audio SourceConnecting AN External Power Amplifier Advanced ConnectionConnecting the Antenna Terminals Connecting for Multiroom Listening Multiroom B Multiroom aBi-amp connection BassBad connection example Connecting i.LINK ComponentsExample connection Connecting Other Equipment Setup Onscreen Display Menu SystemMain Menu SUB MenuInput Setup Func Input SetupCH Input Setup Link Setup7.1 CH Input Setup ModeDIG CompFunction Rename Spkr Speaker Setup Auto SetupManual Setup THX Audio SetupAuto Setup How to operateMrac Marantz Room Acoustic Calibration MeasurementManual Setup Error indications during measurementSpeaker Size LargeSpeaker Distance THX Audio Setup Speaker LevelSpeaker type and positioning Boundary Gain CompensationBass Peak Level Level with the or cursor buttonSurround Setup Channel LevelCSII/TS XT Parameter NEO6 ParameterVideo Color BAR Video SetupVideo Auto on Multi Room Setup PreferenceDC Trigger Setup Disable with the or cursor buttonsOK/ENTER button You can select Main ROOM, MultiPreset G. EQ 1 & 2 ADJ EQ ModeAcoustic EQ Check Auto 1Audio Status Input OutputBasic Operation Selecting AN Input SourceLink Function Video ConvertSelecting the Surround Mode Adjusting the Main Volume Adjusting the Tone Bass Treble ControlUsing the SR9600 Using the remote control unitLIP.SYNC Dialogue Normalization MessageRE-EQ Surround Mode SurroundSource Direct Pure DirectMulti CH. ST Circle Surround CSII-CINEMA, CSII-MUSIC, CSII-MONOVirtual StereoInput Signal Decoding Analog THX Other Function Display Mode Video ON/OFFSelecting Analog Audio Input Or Digital Audio Input Recording AN Analog SourceCH Input AUX2 InputManual Tuning Auto TuningListening to the Tuner Direct Frequency CallPreset Memory Auto Preset MemoryRecalling a Preset Station Checking the Preset StationsSorting Preset Stations Name Input of the Preset Station→ Blank → a UP → ← DownMulti Room Playback Using Multi Speaker Terminals Multiroom Playback Using Multi Room OUT TerminalsMultiroom SystemTo view OSD information, tap the OSD on page 1/6 GeneralTuner 1 or Troubleshooting Symptom Cause RemedyDisplay does not Connected monitor or Appear over an Hdmi HdmiLink Audio Technical Specifications DimensionsEurope
Related manuals
Manual 2 pages 58.36 Kb

SR9600 specifications

The Marantz SR9600 is a high-performance home theater receiver that has long been renowned for its remarkable sound quality and comprehensive features. A favorite among audiophiles and movie enthusiasts, the SR9600 stands out in the crowded field of A/V receivers due to its blending of cutting-edge technology with a classic, stylish design.

At the heart of the SR9600 is its robust audio architecture, boasting a powerful 7.1-channel amplification system. It is equipped with 110 watts per channel, which ensures that even in larger rooms, sound remains clear and dynamic. The receiver employs high-quality components, including discrete power amplifiers, that reduce noise and distortion, resulting in an immersive auditory experience.

The SR9600 supports multiple surround sound formats, including Dolby TrueHD, DTS-HD Master Audio, and several others, delivering crystal-clear audio that fully envelops the listener. This model also integrates Marantz's proprietary HDAM (Hyper Dynamic Amplification Module) technology, enhancing the overall sound performance by providing superior transient response and detail.

For video enthusiasts, the SR9600 offers advanced video processing with upscaling capabilities up to 1080p, ensuring that standard and high-definition sources look their best on a big screen. The receiver is compatible with a variety of formats, thanks to its multiple HDMI inputs and outputs, allowing seamless connectivity to Blu-ray players, gaming consoles, and streaming devices.

Another standout feature is its comprehensive connectivity options, including network capability for streaming audio content from popular services like Spotify and Pandora. With built-in Wi-Fi and Ethernet support, users can easily access their favorite music, while the USB port enables playback from portable devices.

The SR9600 also boasts an intuitive user interface and an easy setup process, complemented by an on-screen display that guides users through the configuration settings. Its automatic calibration system, Audyssey MultEQ XT, adjusts speaker settings, ensuring optimal sound quality tailored to the specific acoustics of the room.

In terms of design, the Marantz SR9600 reflects a premium aesthetic, featuring a sleek, black finish with a well-illuminated front panel. The layout is thoughtfully arranged, making it user-friendly for both setup and operation.

Overall, the Marantz SR9600 is a powerful, versatile A/V receiver that encompasses the essential technologies and features needed for an exceptional home theater experience. Its solid performance, along with its rich set of capabilities, makes it an enduring choice for those seeking to enhance their listening and viewing enjoyment.
Top Page Image Contents