Marantz SR9600 manual Dialogue Normalization Message, Re-Eq, Lip.Sync

Page 52

ENGLISH

NIGHT MODE

 

 

wed Jun 01 4:40pm

 

5/8 A/V Amp

 

Mode

 

1.

1. Tap the Night on the remote control unit to turn on the Night mode.

Setting the Night mode to “ON” compresses the dynamic range in Dolby Digital only.

This softens loud passages such as sudden explosions, to help prevent disturbing others

late at night.

2. To turn off the Night mode, tap the Night again.

DIALOGUE NORMALIZATION

MESSAGE

Dialogue Normalization (Dial Norm) is a feature of Dolby Digital.

When playing back software which has been encoded in Dolby Digital, sometimes you may see a brief message on the FL display which will read "Dial Norm X dB" (X being a numeric value).

Dialogue Normalization serves to let you know if the source material has been recorded at a higher or lower level than usual. For example, if you see the following message: "Dial Norm + 4 dB" on the FL display, to keep the overall output level constant just turn down the volume control by 4 dB. In other words, the source material that you are listening to has been recorded 4 dB louder than usual.

If you do not see a message on the FL display, then no adjustment of the volume control is necessary.

RE-EQ

This menu is for turning THX Cinema Re-EQ™ on and off. The tonal balance of a film soundtrack will be excessively bright and harsh when played back over audio equipment in the home. This is because film soundtracks were designed to be played back in large movie theater environments.

Activating the Cinema Re-EQ™ mode when watching a film made for movie theaters corrects this and restores the correct tonal balance.

Cinema Re-EQ™ is therefore not necessary for material that was not designed for movie theaters (for example, sports programming, television shows, made for TV movies, etc.).

The Cinema Re-EQ™ mode can be activated only while in Dolby Pro Logic mode, or while decoding Dolby Digital or DTS-encoded material.

wed Jun 01

4:40pm

5/8 A/V Amp

Mode

1.

1. Tap the “Re EQ” on the remote control unit to

turn on the Re-EQ™ mode.

2. To turn off the Re-EQ™ mode, tap the “Re EQ”

again.

Note:

•The Re-EQ™ mode can be selected from the OSD menu system. (See page 41)

LIP.SYNC

Depending on the display component (TV, monitor, projector, etc.) connected to the SR9600, a time lag can occur between image signal processing and audio signal processing. Though minor, this time lag can interfere with movie and music enjoyment. The Lip.Sync mode delays the audio signal with respect to the image signal output from the SR9600 to correct the time lag between the sound and image.

1. Tap the A/V Amp and press the page up

button until page 5/8 is displayed. Tap the “L-

Sync” on the remote control unit.

wed Jun 01

4:40pm

5/8 A/V Amp

Mode

1.

2. Select the time lag with the and cursor buttons on the remote control unit.

2.

VOL

OK

CH

2.

HS

ExM

The initial setting is “OFF” (0 ms). The time lag can be adjusted in 10 ms increments up to 200 ms. Watch the picture on the image device (e.g., TV, monitor, projector, etc.) as you adjust the time lag.

Note:

•The Lip.Sync mode is set to “OFF” (0 ms) in the Pure Direct and Source Direct mode. When the Pure Direct (or Source Direct) mode is deactivated, the previously set value of the Lip. Sync mode is automatically restored.

50

Page 51 Page 53
Image 52
Page 51 Page 53
Contents Model SR9600 User Guide Additional Safety Information Read Before Operating EquipmentOperate normally, or has been dropped ICES-003 La norme NMB-003 du CanadaTable of Contents Introduction PrecautionsA. Advanced Speaker Array DescriptionC. Boundary Gain Compensation About Dolby Pro Logic TruBass, SRS, Symbol are trademarks SRS Labs, IncLicense from SRS Labs, Inc Features THX Ultra certifiedCurrent feedback 7 ch amplifier Link Transmission FormatsAccessories Remote control unit RC3200BFront Panel ¡4SIGNAL Format and Tuner indicators Disp Display Off indicatorSurround mode / i.LINK indicator Sleep timer indicatorRear Panel VCR2/DVD-RMulti SPEAKER/SPEAKER C AC InletAC Outlets Monitor OUTLoading Batteries REMOTE-CONTROLLABLE RangeActivating the RC3200B Operating DevicesSurround Mode 1 page 2/8 Surround Mode 2 page 3/8Surround Mode 3 page 4/8 Mode page 5/8Multi Room A/B Multi Room A/B page 1/6DC Trigger page 8/8 DVD, TV, CD VCR1, DSS, CD-R VCR2, LD, Tape AUX1, AUX2ST/M Tuner 1/2 Recording MacrosAM/FM RDS PTYShow the SR9600 Status on RC3200BStatus Multiroom a StatusAdjusting the Settings First SetupSecond Setup Working with ModesThird Setup To Exit Setup ModeAdjust the Time RevertLearn Sequence Learning CommandsTip RC3200B Setup Cleaning RC3200BHOW to Reset the RC3200B Important NoticesSpeaker Placement Connecting SpeakersConnecting a Subwoofer Connecting Speaker WireConnecting Audio Components Connecting Digital Audio ComponentsConnecting Video Components Video signal for the Video jacks isConventional composite video signal Video jackHdmi Jack Connecting Hdmi DevicesSelect an input source from the OSD menu system. See Connecting the Remote Control Jacks Connecting Multichannel Audio SourceConnecting AN External Power Amplifier Advanced ConnectionConnecting the Antenna Terminals Connecting for Multiroom Listening Multiroom B Multiroom aBi-amp connection BassExample connection Connecting i.LINK ComponentsBad connection example Connecting Other Equipment Setup Onscreen Display Menu SystemMain Menu SUB MenuInput Setup Func Input SetupCH Input Setup Link Setup7.1 CH Input Setup ModeDIG CompFunction Rename Spkr Speaker Setup Auto SetupManual Setup THX Audio SetupAuto Setup How to operateMrac Marantz Room Acoustic Calibration MeasurementManual Setup Error indications during measurementSpeaker Size LargeSpeaker Distance THX Audio Setup Speaker LevelSpeaker type and positioning Boundary Gain CompensationBass Peak Level Level with the or cursor buttonSurround Setup Channel LevelCSII/TS XT Parameter NEO6 ParameterVideo Auto on Video SetupVideo Color BAR Multi Room Setup PreferenceDC Trigger Setup Disable with the or cursor buttonsOK/ENTER button You can select Main ROOM, MultiPreset G. EQ 1 & 2 ADJ EQ ModeAcoustic EQ Check Auto 1Audio Status Input OutputBasic Operation Selecting AN Input SourceLink Function Video ConvertSelecting the Surround Mode Adjusting the Main Volume Adjusting the Tone Bass Treble ControlUsing the SR9600 Using the remote control unitRE-EQ Dialogue Normalization MessageLIP.SYNC Surround Mode SurroundSource Direct Pure DirectMulti CH. ST Circle Surround CSII-CINEMA, CSII-MUSIC, CSII-MONOVirtual StereoInput Signal Decoding Analog THX Other Function Display Mode Video ON/OFFSelecting Analog Audio Input Or Digital Audio Input Recording AN Analog SourceCH Input AUX2 InputManual Tuning Auto TuningListening to the Tuner Direct Frequency CallPreset Memory Auto Preset MemoryRecalling a Preset Station Checking the Preset StationsSorting Preset Stations Name Input of the Preset Station→ Blank → a UP → ← DownMulti Room Playback Using Multi Speaker Terminals Multiroom Playback Using Multi Room OUT TerminalsMultiroom SystemTuner 1 or GeneralTo view OSD information, tap the OSD on page 1/6 Troubleshooting Symptom Cause RemedyLink Audio HdmiDisplay does not Connected monitor or Appear over an Hdmi Technical Specifications DimensionsEurope
Related manuals
Manual 2 pages 58.36 Kb

SR9600 specifications

The Marantz SR9600 is a high-performance home theater receiver that has long been renowned for its remarkable sound quality and comprehensive features. A favorite among audiophiles and movie enthusiasts, the SR9600 stands out in the crowded field of A/V receivers due to its blending of cutting-edge technology with a classic, stylish design.

At the heart of the SR9600 is its robust audio architecture, boasting a powerful 7.1-channel amplification system. It is equipped with 110 watts per channel, which ensures that even in larger rooms, sound remains clear and dynamic. The receiver employs high-quality components, including discrete power amplifiers, that reduce noise and distortion, resulting in an immersive auditory experience.

The SR9600 supports multiple surround sound formats, including Dolby TrueHD, DTS-HD Master Audio, and several others, delivering crystal-clear audio that fully envelops the listener. This model also integrates Marantz's proprietary HDAM (Hyper Dynamic Amplification Module) technology, enhancing the overall sound performance by providing superior transient response and detail.

For video enthusiasts, the SR9600 offers advanced video processing with upscaling capabilities up to 1080p, ensuring that standard and high-definition sources look their best on a big screen. The receiver is compatible with a variety of formats, thanks to its multiple HDMI inputs and outputs, allowing seamless connectivity to Blu-ray players, gaming consoles, and streaming devices.

Another standout feature is its comprehensive connectivity options, including network capability for streaming audio content from popular services like Spotify and Pandora. With built-in Wi-Fi and Ethernet support, users can easily access their favorite music, while the USB port enables playback from portable devices.

The SR9600 also boasts an intuitive user interface and an easy setup process, complemented by an on-screen display that guides users through the configuration settings. Its automatic calibration system, Audyssey MultEQ XT, adjusts speaker settings, ensuring optimal sound quality tailored to the specific acoustics of the room.

In terms of design, the Marantz SR9600 reflects a premium aesthetic, featuring a sleek, black finish with a well-illuminated front panel. The layout is thoughtfully arranged, making it user-friendly for both setup and operation.

Overall, the Marantz SR9600 is a powerful, versatile A/V receiver that encompasses the essential technologies and features needed for an exceptional home theater experience. Its solid performance, along with its rich set of capabilities, makes it an enduring choice for those seeking to enhance their listening and viewing enjoyment.
Top Page Image Contents