Marantz SR9600 manual Setup, Onscreen Display Menu System

Page 32

ENGLISH

SETUP

After all components are connected, initial setup must be performed.

ONSCREEN DISPLAY MENU SYSTEM

The SR9600 incorporates an onscreen menu system, which makes various operations possible by using the cursor ( , , , ) and OK/ENTER buttons on the remote control unit or on the front panel.

RC3200B BUTTON CONTROL

 

 

 

 

 

 

 

 

UP button

LEFT button

VOL

OK

CH

RIGHT button

 

 

 

S

 

 

 

Ex

M

 

Note:

•To view the onscreen displays, make certain you have connected the MONITOR OUT jack on the rear panel to the composite, S-Video or component video input of your TV or projector. (See page 23)

1.Tap the A/V Amp on the remote control unit. (This step is not needed when operating the setup menus from the SR9600.)

2.Press the M button on the remote control or press the MENU button on the front panel. The “MAIN MENU” of the OSD menu system is displayed.

There are 7 items in the MAIN MENU.

3. Select the desired sub-menu with the or cursor buttons and press the OK/ENTER

OK button

Ex (Exit) button

Press this button to exit the

OSD menu system.

SR9600 FRONT BUTTON CONTROL

DOWN button

M (Menu) button

Press this button to display the OSD menu system.

button. The display will change to the selected sub-menu.

Notes:

•If you desire to adjust any sub-menu, you need to set it to UNLOCKED.

•To lock sub-menus, set items 1-7 on the MAIN MENU to “LOCKED”.

<Example>

(1)With “1. INPUT SETUP” selected, press the cursor button to select “UNLOCK”.

(2)

Select “LOCKED” with the or cursor buttons.

(3)

Press the cursor button to enter the setting. A

 

“•” will appear to the right of “LOCKED”.

(4)“ 7 . AUDIO STATUS ” cannot be set to “LOCKED”.

4.To exit from OSD menu system, press the EXIT button, or move the cursor to EXIT and press the OK/ENTER button.

Note:

•Settings are entered with the ENTER button on the unit or the OK button on the remote control unit. When using the remote control unit, use the OK button as if it were the ENTER button.

 

 

UP button

ENTER button

 

MULTI

 

 

AUTO

MULTI SPEAKER

AUTO TUNE T-MODE

MEMORY

 

7.1CH INPUT

DISPLAY

 

T THX

 

 

MRAC

LEFT button

MENU

EXIT

RIGHT button

 

 

ENTER

 

 

 

 

MIC

MENU button

 

 

EXIT button

Press this button to display the

DOWN button

Press this button to exit the

OSD menu system.

OSD menu system.

30

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Model SR9600 User Guide Additional Safety Information Read Before Operating EquipmentOperate normally, or has been dropped ICES-003 La norme NMB-003 du CanadaTable of Contents Introduction PrecautionsC. Boundary Gain Compensation DescriptionA. Advanced Speaker Array License from SRS Labs, Inc TruBass, SRS, Symbol are trademarks SRS Labs, IncAbout Dolby Pro Logic Features THX Ultra certifiedCurrent feedback 7 ch amplifier Link Transmission FormatsAccessories Remote control unit RC3200BFront Panel ¡4SIGNAL Format and Tuner indicators Disp Display Off indicatorSurround mode / i.LINK indicator Sleep timer indicatorRear Panel VCR2/DVD-RMulti SPEAKER/SPEAKER C AC InletAC Outlets Monitor OUTLoading Batteries REMOTE-CONTROLLABLE RangeActivating the RC3200B Operating DevicesSurround Mode 1 page 2/8 Surround Mode 2 page 3/8Surround Mode 3 page 4/8 Mode page 5/8Multi Room A/B Multi Room A/B page 1/6DC Trigger page 8/8 DVD, TV, CD VCR1, DSS, CD-R VCR2, LD, Tape AUX1, AUX2ST/M Tuner 1/2 Recording MacrosAM/FM RDS PTYShow the SR9600 Status on RC3200BStatus Multiroom a StatusAdjusting the Settings First SetupSecond Setup Working with ModesThird Setup To Exit Setup ModeAdjust the Time RevertTip Learning CommandsLearn Sequence RC3200B Setup Cleaning RC3200BHOW to Reset the RC3200B Important NoticesSpeaker Placement Connecting SpeakersConnecting a Subwoofer Connecting Speaker WireConnecting Audio Components Connecting Digital Audio ComponentsConnecting Video Components Video signal for the Video jacks isConventional composite video signal Video jackSelect an input source from the OSD menu system. See Connecting Hdmi DevicesHdmi Jack Connecting the Remote Control Jacks Connecting Multichannel Audio SourceConnecting AN External Power Amplifier Advanced ConnectionConnecting the Antenna Terminals Connecting for Multiroom Listening Multiroom B Multiroom aBi-amp connection BassBad connection example Connecting i.LINK ComponentsExample connection Connecting Other Equipment Setup Onscreen Display Menu SystemMain Menu SUB MenuInput Setup Func Input SetupCH Input Setup Link Setup7.1 CH Input Setup ModeDIG CompFunction Rename Spkr Speaker Setup Auto SetupManual Setup THX Audio SetupAuto Setup How to operateMrac Marantz Room Acoustic Calibration MeasurementManual Setup Error indications during measurementSpeaker Size LargeSpeaker Distance THX Audio Setup Speaker LevelSpeaker type and positioning Boundary Gain CompensationBass Peak Level Level with the or cursor buttonSurround Setup Channel LevelCSII/TS XT Parameter NEO6 ParameterVideo Color BAR Video SetupVideo Auto on Multi Room Setup PreferenceDC Trigger Setup Disable with the or cursor buttonsOK/ENTER button You can select Main ROOM, MultiPreset G. EQ 1 & 2 ADJ EQ ModeAcoustic EQ Check Auto 1Audio Status Input OutputBasic Operation Selecting AN Input SourceLink Function Video ConvertSelecting the Surround Mode Adjusting the Main Volume Adjusting the Tone Bass Treble ControlUsing the SR9600 Using the remote control unitLIP.SYNC Dialogue Normalization MessageRE-EQ Surround Mode SurroundSource Direct Pure DirectMulti CH. ST Circle Surround CSII-CINEMA, CSII-MUSIC, CSII-MONOVirtual StereoInput Signal Decoding Analog THX Other Function Display Mode Video ON/OFFSelecting Analog Audio Input Or Digital Audio Input Recording AN Analog SourceCH Input AUX2 InputManual Tuning Auto TuningListening to the Tuner Direct Frequency CallPreset Memory Auto Preset MemoryRecalling a Preset Station Checking the Preset StationsSorting Preset Stations Name Input of the Preset Station→ Blank → a UP → ← DownMulti Room Playback Using Multi Speaker Terminals Multiroom Playback Using Multi Room OUT TerminalsMultiroom SystemTo view OSD information, tap the OSD on page 1/6 GeneralTuner 1 or Troubleshooting Symptom Cause RemedyDisplay does not Connected monitor or Appear over an Hdmi HdmiLink Audio Technical Specifications DimensionsEurope
Related manuals
Manual 2 pages 58.36 Kb

SR9600 specifications

The Marantz SR9600 is a high-performance home theater receiver that has long been renowned for its remarkable sound quality and comprehensive features. A favorite among audiophiles and movie enthusiasts, the SR9600 stands out in the crowded field of A/V receivers due to its blending of cutting-edge technology with a classic, stylish design.

At the heart of the SR9600 is its robust audio architecture, boasting a powerful 7.1-channel amplification system. It is equipped with 110 watts per channel, which ensures that even in larger rooms, sound remains clear and dynamic. The receiver employs high-quality components, including discrete power amplifiers, that reduce noise and distortion, resulting in an immersive auditory experience.

The SR9600 supports multiple surround sound formats, including Dolby TrueHD, DTS-HD Master Audio, and several others, delivering crystal-clear audio that fully envelops the listener. This model also integrates Marantz's proprietary HDAM (Hyper Dynamic Amplification Module) technology, enhancing the overall sound performance by providing superior transient response and detail.

For video enthusiasts, the SR9600 offers advanced video processing with upscaling capabilities up to 1080p, ensuring that standard and high-definition sources look their best on a big screen. The receiver is compatible with a variety of formats, thanks to its multiple HDMI inputs and outputs, allowing seamless connectivity to Blu-ray players, gaming consoles, and streaming devices.

Another standout feature is its comprehensive connectivity options, including network capability for streaming audio content from popular services like Spotify and Pandora. With built-in Wi-Fi and Ethernet support, users can easily access their favorite music, while the USB port enables playback from portable devices.

The SR9600 also boasts an intuitive user interface and an easy setup process, complemented by an on-screen display that guides users through the configuration settings. Its automatic calibration system, Audyssey MultEQ XT, adjusts speaker settings, ensuring optimal sound quality tailored to the specific acoustics of the room.

In terms of design, the Marantz SR9600 reflects a premium aesthetic, featuring a sleek, black finish with a well-illuminated front panel. The layout is thoughtfully arranged, making it user-friendly for both setup and operation.

Overall, the Marantz SR9600 is a powerful, versatile A/V receiver that encompasses the essential technologies and features needed for an exceptional home theater experience. Its solid performance, along with its rich set of capabilities, makes it an enduring choice for those seeking to enhance their listening and viewing enjoyment.
Top Page Image Contents