2002 Dimension One Spas Export Owner’s Manual
Operation
Operation is divided into two sections: Programming the Digital Control for the Arena, Aurora HP, Caliente, and Triad (following section) and Programming the Scrolling Message Center for the Aurora II, Aurora XLT, Caliente HP, Californian, Chairman, Chairman II, Diplomat, Nautlilus, and Triad II (proceed to the Programming the Scrolling Message Center section).
Programmable Digital Control for the Arena, Aurora HP, Caliente, and Triad
Advanced microprocessor technology has been utilized to produce the Programmable Digital Control. Easy to use and understand, Dimension One Spas has put every hot tub function within fingertip control. Temperature setting, jet power control, and the hot tub light are all
Digital Control, Figure 3, lets you relax and enjoy everything your hot tub has to offer.
Gain a thorough knowledge of the following information before starting up your spa
Note
|
|
| Figure 3. Digital Control |
|
Top Side Control |
|
| ||
|
|
|
|
|
|
|
|
|
|
|
| Control | Function |
|
|
| 1 | 1. Digital Display |
|
|
|
| The digital display indicates (depending on program mode) temperature in |
|
|
|
| degrees F or C, time, filter cycle start time, filter cycle duration time, and |
|
|
|
| number of filter cycles. For more information see “Digital Display Messages”. |
|
|
|
|
|
|
|
| 2 | 2. JETS (Low/High Control) Pad |
|
|
|
| When the JETS pad is pushed, the hot tub jet pump is energized and the JETS |
|
|
|
| Status Light (1) will illuminate. Each time the pad is pushed it will activate a 30 |
|
|
|
| minute automatic |
|
|
|
| also allows for convenient filtration immediately after using the hot tub. The |
|
|
|
| first time a pad is pushed the pump is turned on. When the same pad is pushed |
|
|
|
| again, the pump will turn off. |
|
|
|
| NOTE: Pushing the JETS pad will disable any concurrent filter cycle. |
|
|
|
|
|
|
7