2002 Dimension One Spas Export Owner’s Manual
Do not attempt to remove the light housing cover without lowering the water level below the light housing cover.
Warning
Do not attempt to remove the light housing cover without the special tool. If you are not able to locate it, contact the Dimension One Spas’ Service Department to have one sent.
Note
| Be sure the |
| Dimension One Spas if a replacement |
Note |
|
|
|
| A Dynamic L.E.D. Light is available as an optional accessory for many models. This light is |
| preprogrammed with 13 different light shows. This light is also replaced in the same manner as |
Feature | described in the previous paragraph. Contact your dealer or visit our Virtual Showroom at |
http://d1spas.com to see if it is available for your model. | |
|
|
Surface Care – Ultralife and Granitex
Your equipment has a very high quality finish. Stains and dirt will generally not adhere to the surface. We recommend cleaning the entire shell surface with Dimension One Spas’ Water Line Cleaner. You may also use Dimension One Spas’ ph/Alkalinity Increaser or mild cleaners like Soft Scrub. Be sure to thoroughly rinse the shell. After cleaning, you will want to restore your hot tub shell’s original luster by using Dimension One Spas’
| Do not use “409” type cleaners or other caustic solutions as they may damage the hot tub shell |
| surface and void the warranty. If you are using baking soda to clean your hot tub shell, be careful |
Caution | not to get it on the skirt. It may bleach the wood. |
|
Do not use
Caution
Granitex/Quarite Plus
If your spa is equipped with this material you must keep the spa covered when it is empty. When the spa is empty and the cover is not in place, and the spa is exposed to direct sunlight, it is vulnerable to ultraviolet light or solar damage. Temperatures generated by sunlight can become concentrated in the shell surface causing the shell material to delaminate from the urethane backing.
Dimension One “ EnviroTect” Skirts and Vinyl Covers
The Dimension One EnviroTect skirts are unaffected by most corrosive substances, and will not absorb moisture. To maintain the original finish, clean with soap and water. No sealing or painting is required. To maintain a “nearly original” appearance we recommend applying 303 Protectant at least once a month on the Dimension One EnviroTect skirts and on the vinyl covers if they are exposed to direct sunlight. 303 Protectant is rated at 40 SPF (Sun Protection Factor).
25