Bush Hog 2165 manual Flow Divider Valve to Skid Steer Adapter Mounting

Page 42

Skid Steers with an auxiliary hydraulic flow of 15 gpm or less - Figure 29

Assemble straight male adapter (6) to “K3” port on valve as shown in Figure 29. Assemble JIC swivel run tee (9) to straight male adapter (6). Assemble 90° male adapter (10) to “K2” port on valve.

Skid Steers with an auxiliary hydraulic flow greater than 15 gpm - Figure 30

Assemble straight male adapter (6) to “K2” port on valve as shown in Figure 30. Assemble JIC swivel run tee (9) to straight adapter (6). Assemble 90° male adapter (10) to “K3” port on valve.

IMPORTANT - The location of the JIC swivel run tee will ensure that proper flow is provided to the backhoe for smooth operation. The flow into the valve from the skid steer is divided between the two outlet ports “K2” and “K3”. The hydraulic flow is split so that 60% is flowing from the “K2” port and 40% is flowing from the “K3” port.

4.Assemble 90° JIC adapter (8) to through port of swivel run tee fitting (9).

5. Assemble 45° JIC adapters (7) to both “In/Pressure” and “Out/Return” ports on the backhoe bulkhead connection.

6.Connect 24” hydraulic hose (11) between 45° JIC adapter (7) on backhoe “In/Pressure” bulkhead con- nection and single 90° male adapter (10) located on top of flow divider valve.

7.Connect 24” hydraulic hose (11) between 45° JIC adapter (7) on backhoe “Out/Return” bulkhead con-

nection and JIC swivel run tee (9) on flow divider valve.

8.Assemble quick coupler (supplied by customer) to pressure line hydraulic hose (supplied by customer) and connect free end of hose to 90° male adapter (10) at bottom of flow divider valve.

9.Assemble quick coupler (supplied by customer) to return line hydraulic hose (supplied by customer) and connect free end of hose to 90° JIC adapter (8) on flow divider valve.

10.Carefully route pressure and return line hydraulic hoses to tractor hydraulic connections. Remove dust caps from tractor hydraulic connections and connect hoses to the appropriate port on tractor.

Testing Backhoe Hydraulic Hook-Up

1.Start skid steer loader engine.

2.Set parking brake and engage auxiliary boom hydraulics so that oil flows to backhoe. NOTE! Consult skid steer Operator’s Manual for proper operation.

3.Exit skid steer and sit in backhoe operator’s seat.

4.To remove air from backhoe hydraulic system, slowly cycle all backhoe functions (stabilizers, boom, dipperstick, bucket, and swing) several times. Be sure to cycle stabilizers first and then lower both sta- bilizer arms into operating position before cycling other backhoe functions.

5. Exit backhoe, disengage auxiliary boom hydraulics, stop engine, and check skid steer hydraulic fluid level.

Figure 28

FLOW DIVIDER VALVE TO SKID STEER ADAPTER MOUNTING

1

6

103

5

12

4 2

10

40

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Backhoes Congratulations Table of Contents BackhoesThis Limited Warranty Shall not Apply Disclaimer of Implied Warranties & Consequential DamagesDealer Preparation Check List 2165, 2175, 2185 and 2195 BackhoesSafety Alert Symbol Your Safety is InvolvedImportant Safety Precautions TractorBackhoe Adjustments and Inspection TransportationAvoid HIGH-PRESSURE Fluids This Act Seeks EMPLOYERS, Employees and OperationsEmployee Tractor Operating Instructions Osha RegulationsKeep bystanders a safe distance away Engine SpeedControls Lock Pins Storage Tubes Operating the BackhoeTransporting the Backhoe 50102295When Transporting Placing the StabilizersFilling the Bucket Dumping the BucketFinishing Straight Walls Side Slope Excavating or TrenchingMiscellaneous BackfillingBleeding Backhoe Hydraulic System ServiceBeginning of Season Hydraulic System HosesTightening Nuts and Bolts Tooth ReplacementLubrication On Models 2165, 2175, 2185 and 2195 the followInstall the swing safety lock pin as shown in Figures 1 Removal from Tractor StorageTroubleshooting Procedures Stabilizer PadsTroubleshooting Troubleshooting Load drops or settles Troubleshooting Troubleshooting Valve Repair Replace Center Section AssembliesReplacing Spool Seals Assembly GeneralGeneral Description Mounting Backhoe to Tractor or Skid Steer loadersAg Tractor using 3-point hitch Point Hitch Linkage 2165Assembly Refer to Figures 14 2185/2195 Point Hitch LinkageAssembly Assembly PTO Pump Kits OptionalHydraulic HOOK-UP to Tractor Do not Remove Tractor PTO GuardPage Closed Center System Hook-Up Requirements Hook-Up DiagramHydraulic Hook-Up 2175, 2185 Backhoe OperationPower Beyond Kits For Tractors with OPEN-CENTER Hydraulic SystemsTractor Preparation Great Bend Backhoe & Great Bend Loader Valve Second Procedure AssemblyFlow Divider Valve to Backhoe Mounting Flow Divider KIT OptionalGeneral Description Tractors with an auxiliary hydraulic flow of 15 gpm or lessTesting Backhoe Hydraulic Hook-Up For Tractor Hydraulic Flow Greater than 15 GPMFlow Divider Valve to Skid Steer Adapter Mounting For Skid Steer H Ydraulic Flow of 15 GPM or Less For Skid Steer HydraulicSeries Page Safety Decals Torque Specifications Recommended Torque in Foot Pounds Newton MetersBox 1039 Selma, AL 334

2165 specifications

The Bush Hog 2165 is a versatile and robust rotary cutter designed for heavy-duty lawn care and land management applications. This model is a part of the renowned Bush Hog lineup, known for its durability, efficiency, and ease of use. The 2165 strikes an excellent balance between performance and functionality, making it an ideal choice for homeowners, landscapers, and farmers alike.

One of the standout features of the Bush Hog 2165 is its impressive cutting width of 65 inches, which allows it to cover large areas quickly and effectively. This makes it particularly suitable for tackling overgrown fields, pastures, and roadside maintenance tasks. The cutter is equipped with a powerful, heavy-duty gearbox that ensures reliable performance under various conditions, providing users with the confidence to handle even the most challenging cutting jobs.

The design of the Bush Hog 2165 emphasizes user safety and comfort. The model comes with a sturdy safety shield that protects operators from flying debris during operation. Additionally, the cutter features a tough, welded frame construction, which enhances its durability and ensures that it can withstand the rigors of repeated use.

Another notable technology incorporated into the Bush Hog 2165 is its adjustable cutting height feature. This allows users to set the desired grass height easily, ranging from 1 to 4 inches. This flexibility is crucial for achieving the perfect lawn look and accommodating different mowing requirements throughout the seasons.

The 2165 also includes high-capacity cutting blades designed to provide a clean and consistent cut. The blades can be replaced or sharpened easily, further enhancing the cutter's practicality and extending its lifespan. Furthermore, the model is compatible with a variety of tractors, making it a versatile attachment that fits seamlessly into many existing agricultural setups.

Overall, the Bush Hog 2165 rotary cutter is engineered for reliability and performance. Its blend of advanced technologies, safety features, and user-friendly design make it an excellent choice for anyone in need of a dependable mowing solution. Whether for personal gardening projects or professional landscape management, the Bush Hog 2165 excels in meeting the demands of diverse applications, ensuring users achieve their landscaping goals efficiently and effectively.
Top Page Image Contents