ELECTRICAL CONNECTION
WARNING
Electrical codes change from Province to Province. Check with your electrician for the electrical codes in your area.
A certified electrician must make all electrical connections to your spa, in accordance with all applicable electrical codes for your area. The spa’s GFCI breaker must be sized in accor- dance to electrical requirements of the spa. The Full Load Amperage (FLA) is recorded on the spa’s nameplate.
WARNING
Failure to use a GFCI breaker for electrical connection to your spa could result in seri- ous harm or death. No electrical power should be available near the spa without GFCI protection.
ELECTRICAL CONNECTION ACCESS
To access Electrical connections:
Electrical connections are within the spa pack. There are 2 wire access locations, one on each side of the front panel. The electrical requirements are 220V with a neutral.
L2
N
GND
L1
IMPORTANT SAFETY INSTRUCTIONS
1.Read and follow all instructions.
2.A ground terminal is located on the power connection ter- minal block. To reduce the risk of electric shock this terminal must be connected to the grounding means provided in the
electric supply service panel with a
9