Filter Cleaning, SPA Surface | Aruba Spa Hot Tub Models 2003

WARNING

Make sure you replace your filter cartridge

at least once every six months.

FILTER CLEANING

1.Your spa is equipped with a top access filter. To access the filter cartridge, remove the skim- mer basket and filter cartridge. Do not remove when the pump is running.

2.Once a week remove filter, just hose it off well and replace it. Every 4-6 weeks properly clean your filter in a filter cleaner solution. Soak 4-6 hours (or overnight), rinse well and let dry before replacing it.

3.Once cleaned, re-install filter cartridge and skimmer basket.

4.How often the cartridge filter needs to be cleaned depends largely upon how many bathers are using the hot tub. With average use we recommend cleaning the cartridge filters approximately every 4-6 weeks. However, more frequent or greater numbers of people may require more frequent cleaning.

IMPORTANT

Be sure to thoroughly rinse the filter cartridge to thoroughly remove any cleaning agents. If this is not accomplished, foaming of the water may occur during the filter cycle of the hot tub.

SPA SURFACE

Your spa has a very high quality acrylic surface. Stains and dirt will generally not adhere to the surface. Do not use household products for cleaning the spa surface. Be careful of detergents as they may contain phosphates that may con- taminate the water and will cause foam build-up. Also, many cleaning agents contain abrasives which will scratch the surface, and therefore must not be used. After cleaning, be sure to rinse the surface with water to ensure all excess