Indoor Installation

WARNING

Do not permit electric appliances (such as light, telephone, radio, or television) within 1.5 meters (5 feet) of a spa or hot tub.

Before attempting to place the spa indoors check the door openings to ensure that they are large enough for the spa to fit through. In addition, you must have the structure checked for its loading capacity by an Engineer or competent Contractor. The minimum loading capacity required is 100 lbs per square foot. The spa should be placed in a well-ven- tilated area so that excess condensation can be removed from the area where the spa is located. Locate the spa so the equipment door is readily accessible for maintenance and service needs, and ensure you have an area with proper drainage.

You may also wish to think about the following considera- tions before installing your spa:

•location to facilitate adult supervision if children are using the spa

•location relative to trees (falling leaves and shade)

•exposure to sunlight

•landscaping and night-time lighting

•view from your house

•wind direction

•storage area for maintenance equipment and chemicals

•adjustment of sprinklers so they do not hit spa or spa cabinet

IMPORTANT

Building your spa into a deck or an

enclosed room is the responsibility of the spa owner should it need to be removed for warranty work