Positioning Your SPA

Your spa is self-contained. You can place it on a deck, patio, in your yard, or indoors. Proper site location is an important element of the overall enjoyment of your new spa, so make sure you take enough time to properly plan out the position- ing of your spa. The following information is provided to help you determine where to place your spa. If you have any questions or concerns about where to locate your spa, please contact our customer service department at 1-800-609-2227

IMPORTANT

Check with your local building codes with regards to fencing and gate requirements.

Your spa measures 84”x84”x34” the dry weight is 650 lbs, with water 4000 lbs.

SPECIAL COLD WEATHER START UP PREPARATIONS

When installing your spa in cold weather, ( 0°C, 32°F or cold- er) do the following before adding water:

-check to ensure that the knife valve moves up and down freely, leaving in the up position and leaving the gate valve in the open position.

-check the unions to ensure there is no frozen water block- age and retighten.

If either of these checks indicate that there may be some frozen water, then connect your garden hose to a hot water connection and begin your initial water fill with warm water following the start-up instructions on page 10. The warm water will thaw the residual frozen water and allow these parts to move freely. You could also place a space heater, with a thermostat, on the inside of the skirt, warming the cavity of the spa and thawing any residual water left in the pump and pipes.

WARNING

Ensure power is off at the breaker