Getting Started

are then custom fitted by hand to the areas underneath the seats and stairs to provide additional strength to these areas. This process recognizes that every spa is not identical and ensures individual inspection and custom fitting of each spa.

The spa shell is then insulated with 2 LB closed cell foam. As Aruba Spas are made in Canada we know Canadian weath- er conditions. With this in mind we use enough insulation to get the maximum obtainable R factor from our insulating foam. The use of closed cell foam ensures that water cannot be absorbed into the insulation. The insulation also locks all supports into place and secures the spa to the spa frame.

The electronic operating system, which controls the heating, filtration and lighting systems is then installed and pre-test- ed in our factory. We have selected a well designed operat- ing system that is easy to use and features a number of ener- gy-saving options.

The final touch to the spa is the attractive spa skirt with removable corners and side panels fitted onto the frame to allow easy access to all plumbing. The spa skirt is made from solid tongue-in groove, red cedar and is designed to use shorter lengths of wood that may otherwise not have been utilized. We only use wood that has been harvested from select-cut forests using environmentally responsible tech- niques.

Your spa comes complete with the following items:

•Aruba Spa Owner’s Manual

•50 amp GFCI Breaker

•Instructional DVD/Video

•Tapered Grey Spa Cover with locks and Spa Cover Limited Warranty.

•Aqua Flo Flow-Master Owners Manual

•Aruba Spas Limited Warranty Registration

•Allen Key

Please check to make sure you have received all these items. In addition, if you have ordered any extra accessories please check to make sure that they have been included with your spa.