Ariens 911194 warranty Wheel Drive Control Adjustment, To increase the gap

Page 22

WHEEL DRIVE CONTROL ADJUSTMENT

(Self-Propelled Models)

See Figure 16.

NOTE: When the wheel drive control is disengaged, the gap between the friction disc and the aluminum drive plate should be approximately .030" (.7mm). See Figure 16.

Friction Disc

Aluminum Drive

 

Plate

 

Approx. .030"

 

(0.7mm)

 

Figure 16

Check the adjustment with the engine off and with the engine on:

1.With the engine off and the wheel drive control disengaged, push the mower forward in both fast and slow speed settings.

If the mower pushes freely, the gap between the friction disc and aluminum drive plate is sufficient. If the mower is difficult to push or the rear wheels drag, increase the gap between the friction disc and aluminum drive plate.

2.With the engine on, the mower should start moving as soon as the wheel drive control begins to pull on the cable.

If the wheel drive control requires a long travel before the mower begins to pull, decrease the gap between the friction disc and aluminum drive plate.

To increase the gap between the friction disc and the aluminum drive plate:

1.Loosen the lower cable nut on the wheel drive control cable, and then tighten the upper cable nut against the adjuster bracket. See Figure 17.

To increase the gap,

loosen the lower cable nut.

Then tighten the upper cable nut against the bracket.

Figure 17

To decrease the gap between the friction disc and the aluminum drive plate:

1.Loosen the upper cable nut on the wheel drive control cable, and then tighten the lower cable nut against the adjuster bracket. See Figure 18.

GB - 22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Walk Behind Lawn Mower Table of Contents IntroductionProduct Registration Unauthorized Replacement Parts Dealer DeliveryDisclaimer Notations SafetySafety Alerts Practices and LawsSafety Rules Safety Decals LocationsEmission Control System Wear appropriate hearing protection Emission Control System Certification Label Page Carton Contents AssemblyAssembly Controls and Features Cutting Height Adjustment Controls and FeaturesOperation Optional Controls Wheel Drive Control self-propelled models Speed Control self-propelled modelsSwivel Wheel Lock Fuel Stabilizer Filling the Fuel Tank GasolineMower SET-UP To add fuel to fuel tankTo Side Discharge To BagGrass Bag Removal To MulchEmergency Stopping Starting and Shut OFFMaintenance Schedule MaintenanceMaintenance Schedule Check ENGINE/BLADE ControlCheck Grass BAG Clean UnitCheck Wheel Drive Control Check Engine OILCheck Fasteners Check AIR CleanerCheck Drive Belt Change Engine OILDrive Belt Replacement Service and AdjustmentsService Position Handlebar HeightNo slack Wheel Drive Control Adjustment To increase the gapSpeed Control Bell Crank To decrease the gapStorage Troubleshooting Service Parts AccessoriesSpecifications 911193 911194 911170 911192Consumer Mowing Equipment Limited Warranty Limitation of Remedy and Damages Your Warranty Rights and Obligations Evaporative Emission Warranty Parts List DisclaimerAriens West Ryan Street Brillion, WI Fax Walk Behind Lawn Mower Manuel DU Moteur Table DES MatièresLE Manuel Entretien ET Pièces DE RechangePièces DE Rechange NON Homologuées Enregistrement DU ProduitLimitation DE Responsabilité Remarques SécuritéConsignes DE Sécurité Usages ET LoisAutocollants DE Sécurité ET Emplacements Système DE Contrôle DES ÉmissionsPage Page Page Page Contenu MontageMontage Commandes ET Fonctions Fonctionnement Commandes ET FonctionsRéglage DE LA Hauteur DE Coupe Modèles standard Modèles avec roues pivotantesCommande d’entraînement modèles auto-tractés Commandes EN OptionCommande de vitesse modèles auto- tractés Poire d’amorçage 911192, 193Réglage DE LA Tondeuse Remplissage DU Réservoir DE CarburantStabilisateur d’essence Evacuation latérale Pour ensacherDépose du sac à herbe PaillisArrêt D’URGENCE Mise EN Marche ET ArrêtPériodicité DE ’ENTRETIEN Vérification DE LA Commande MOTEUR/LAMEEntretien Périodicité DE L’ENTRETIENVérification DE L’HUILE Moteur Vérification DU SAC a HerbeNettoyage DE LA Machine Vérifier LA LameVidange DE L’HUILE Moteur Vérification DE LA VisserieVérification DU Filtre À AIR Graissage GénéralPosition Pour L’ENTRETIEN Entretien ET RéglagesVérification DES Bougies Prudence RemplacerHauteur DU Guidon Remplacement DE LA Courroie D’ENTRAÎNEMENTModèles auto-tractés Tendu Auto-tractésLevier Coudé DE Commande DE Vitesse modèles auto-tractés Pour réduire l’espaceSac à herbe RemisageNettoyage MoteurDépannage Ne s’enclenche La commande’entraînement Pas modèlesAccessoires Pièces DE RechangeSpécifications Extensions spéciales Limitations DE Recours ET DE Dommages VOS Droits ET Obligations Dans LE Cadre DE LA Garantie Déni de responsabilité Ariens West Ryan Street Brillion, WI Fax

911194 specifications

The Ariens 911194 is a powerful and efficient snow blower designed for residential use, specifically engineered to handle heavy snowfall with ease. As part of the Ariens brand, known for its reliable and durable outdoor power equipment, the 911194 lives up to high expectations, showcasing advanced technology and solid construction.

One of the standout features of the Ariens 911194 is its 24-inch clearing width, allowing users to quickly clear large areas of snow in a single pass. This makes the machine particularly effective for driveways, sidewalks, and large patios. The snow blower is equipped with a 208cc, 4-cycle engine, which provides ample power and robust performance. Its reliable engine starts smoothly in cold weather, ensuring that users can tackle any winter storm without delay.

The Ariens 911194 also features an innovative, adjustable chute that allows for precise control of snow direction. Operators can rotate the chute up to 200 degrees, making it easier to throw snow precisely where it needs to go. This feature is enhanced by a remote deflector that allows users to change the height of the snow stream without stopping the machine, increasing efficiency during operation.

Another key characteristic of the Ariens 911194 is its 6-speed forward and 2-speed reverse transmission. This variability enables users to easily navigate different snow conditions and terrains, ensuring optimal control and maneuverability. The heavy-duty construction includes a durable steel auger and housing, designed to withstand the harshest winter conditions and provide long-lasting performance.

Additionally, the snow blower comes with large, all-terrain tires, which provide excellent traction on icy or uneven surfaces. This ensures that users can operate the machine confidently, regardless of the conditions. Ergonomically designed handles and controls also enhance user comfort, making extended use more manageable.

In conclusion, the Ariens 911194 is a well-rounded snow blower that combines power, efficiency, and user-friendly features. Its robust engine, versatile controls, and durable construction make it an excellent choice for homeowners looking to manage winter's challenges effectively. With the technology and features included, it stands as a reliable investment for maintaining clear and safe outdoor spaces during snowy months.
Top Page Image Contents