Ariens 911194 warranty Emergency Stopping, Starting and Shut OFF

Page 16

EMERGENCY STOPPING

To stop the mower in an emergency:

1.Release the engine/blade control.

2.Release the wheel drive control (self- propelled models).

3.Allow all moving parts to stop before leaving operator’s position.

STARTING AND SHUT OFF

WARNING: Improper operation can lead to injury. Learn what the controls do and how they work. Thoroughly read and understand entire Operator Manual.

See Figure 4 for all Controls and Features.

NOTE: Start engine on a level surface that is free of debris.

Manual Start

1.Check each item under Before Each Use in the MAINTENANCE SCHEDULE on page 17.

2.For engines with a primer, push primer bulb 2 or 3 times for a cold engine.

NOTE: It is unnecessary to prime or choke a warm engine.

3.For engines with a throttle, place throttle control in the choke position. Once the engine has started, place throttle in the high speed detent.

4.With engine/blade control held against the handlebar, grasp starter handle and pull rope slowly until it pulls harder. This is the compression stroke. Let rope rewind slowly.

5.Pull rope with rapid continuous full arm stroke to start engine. Allow rope to rewind slowly.

IMPORTANT: DO NOT let starter handle snap against bracket.

6.Repeat steps 4 and 5 until engine starts. (If engine does not start, see TROUBLESHOOTING on page 25.)

Shut Off

1.Release wheel drive control and allow unit to stop completely (self-propelled models).

2.Release engine/blade control.

Mowing Tips

Cut grass when it is dry. Keep mower blades sharp.

Do not set cutting height too low. For tall grass, mow twice.

Do not mow too fast.

Mow with engine at full throttle. Discharge clippings into areas already cut.

Vary cutting pattern with each mowing.

NOTE: To prevent dirt and grass from collecting on mower pan, avoid operating over bare ground with only patches of grass.

Mulching Tips

For best mulching performance, cut no more than 1 inch (2.54 cm) of grass per cutting.

GB - 16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Walk Behind Lawn Mower Table of Contents IntroductionProduct Registration Unauthorized Replacement Parts Dealer DeliveryDisclaimer Safety Safety AlertsNotations Practices and LawsSafety Rules Safety Decals LocationsEmission Control System Wear appropriate hearing protection Emission Control System Certification Label Page Carton Contents AssemblyAssembly Controls and Features Cutting Height Adjustment Controls and FeaturesOperation Optional Controls Wheel Drive Control self-propelled models Speed Control self-propelled modelsSwivel Wheel Lock Filling the Fuel Tank Gasoline Mower SET-UPFuel Stabilizer To add fuel to fuel tankTo Bag Grass Bag RemovalTo Side Discharge To MulchEmergency Stopping Starting and Shut OFFMaintenance Maintenance ScheduleMaintenance Schedule Check ENGINE/BLADE ControlClean Unit Check Wheel Drive ControlCheck Grass BAG Check Engine OILCheck AIR Cleaner Check Drive BeltCheck Fasteners Change Engine OILService and Adjustments Service PositionDrive Belt Replacement Handlebar HeightNo slack Wheel Drive Control Adjustment To increase the gapSpeed Control Bell Crank To decrease the gapStorage Troubleshooting Service Parts AccessoriesSpecifications 911193 911194 911170 911192Consumer Mowing Equipment Limited Warranty Limitation of Remedy and Damages Your Warranty Rights and Obligations Evaporative Emission Warranty Parts List DisclaimerAriens West Ryan Street Brillion, WI Fax Walk Behind Lawn Mower Table DES Matières LE ManuelManuel DU Moteur Entretien ET Pièces DE RechangePièces DE Rechange NON Homologuées Enregistrement DU ProduitLimitation DE Responsabilité Sécurité Consignes DE SécuritéRemarques Usages ET LoisAutocollants DE Sécurité ET Emplacements Système DE Contrôle DES ÉmissionsPage Page Page Page Contenu MontageMontage Commandes ET Fonctions Fonctionnement Commandes ET FonctionsRéglage DE LA Hauteur DE Coupe Modèles standard Modèles avec roues pivotantesCommandes EN Option Commande de vitesse modèles auto- tractésCommande d’entraînement modèles auto-tractés Poire d’amorçage 911192, 193Réglage DE LA Tondeuse Remplissage DU Réservoir DE CarburantStabilisateur d’essence Pour ensacher Dépose du sac à herbeEvacuation latérale PaillisArrêt D’URGENCE Mise EN Marche ET ArrêtVérification DE LA Commande MOTEUR/LAME EntretienPériodicité DE ’ENTRETIEN Périodicité DE L’ENTRETIENVérification DU SAC a Herbe Nettoyage DE LA MachineVérification DE L’HUILE Moteur Vérifier LA LameVérification DE LA Visserie Vérification DU Filtre À AIRVidange DE L’HUILE Moteur Graissage GénéralEntretien ET Réglages Vérification DES BougiesPosition Pour L’ENTRETIEN Prudence RemplacerHauteur DU Guidon Remplacement DE LA Courroie D’ENTRAÎNEMENTModèles auto-tractés Tendu Auto-tractésLevier Coudé DE Commande DE Vitesse modèles auto-tractés Pour réduire l’espaceRemisage NettoyageSac à herbe MoteurDépannage La commande ’entraînementNe s’enclenche Pas modèlesAccessoires Pièces DE RechangeSpécifications Extensions spéciales Limitations DE Recours ET DE Dommages VOS Droits ET Obligations Dans LE Cadre DE LA Garantie Déni de responsabilité Ariens West Ryan Street Brillion, WI Fax

911194 specifications

The Ariens 911194 is a powerful and efficient snow blower designed for residential use, specifically engineered to handle heavy snowfall with ease. As part of the Ariens brand, known for its reliable and durable outdoor power equipment, the 911194 lives up to high expectations, showcasing advanced technology and solid construction.

One of the standout features of the Ariens 911194 is its 24-inch clearing width, allowing users to quickly clear large areas of snow in a single pass. This makes the machine particularly effective for driveways, sidewalks, and large patios. The snow blower is equipped with a 208cc, 4-cycle engine, which provides ample power and robust performance. Its reliable engine starts smoothly in cold weather, ensuring that users can tackle any winter storm without delay.

The Ariens 911194 also features an innovative, adjustable chute that allows for precise control of snow direction. Operators can rotate the chute up to 200 degrees, making it easier to throw snow precisely where it needs to go. This feature is enhanced by a remote deflector that allows users to change the height of the snow stream without stopping the machine, increasing efficiency during operation.

Another key characteristic of the Ariens 911194 is its 6-speed forward and 2-speed reverse transmission. This variability enables users to easily navigate different snow conditions and terrains, ensuring optimal control and maneuverability. The heavy-duty construction includes a durable steel auger and housing, designed to withstand the harshest winter conditions and provide long-lasting performance.

Additionally, the snow blower comes with large, all-terrain tires, which provide excellent traction on icy or uneven surfaces. This ensures that users can operate the machine confidently, regardless of the conditions. Ergonomically designed handles and controls also enhance user comfort, making extended use more manageable.

In conclusion, the Ariens 911194 is a well-rounded snow blower that combines power, efficiency, and user-friendly features. Its robust engine, versatile controls, and durable construction make it an excellent choice for homeowners looking to manage winter's challenges effectively. With the technology and features included, it stands as a reliable investment for maintaining clear and safe outdoor spaces during snowy months.
Top Page Image Contents