Alamo 02984405 Saftey Equipment, Frame and Boom, Hydraulic System, Rotary Mower Head

Page 102

PRE-DELIVERY INSPECTION CHECKLIST

Pre-Operation Inspection: Check the following items before operating the unit to assure that they are properly assembled. (See previous pages for component location)

Saftey Equipment:

-----Operators Manual is with Unit.

-----The Safety Decals are installed as listed in the Assembly Manual.

-----Valve operation plate is installed.

-----Operators cage or Tractor Cab is in place.

-----Deflectors are installed on the Mower Head.

-----Tractor Rops or Cab with seatbels installed properly.

Frame and Boom:

-----Axle Plate Bolts are torqued.

-----Boom Rest Axle Plate Bolts are torqued.

-----Front Rail Bolts are torqued .

-----Front Support Bolts at tractor are torqued.

-----Rear Rail Bolts torque .

-----Rotator bolts torque to.

-----All Welds inspected toinsure proper welds and locations.

Hydraulic System:

-----Oil Level in Hydraulic Tank is within the sight gauge.

-----Hose connections are tight.

-----Hoses do not have any kinks or twist in them.

-----Front Pump Shaft adapter bolts are tight..

-----Front Pump Shaft Coupler / Drive Shaft is lubricated and has an anti-seize compound on the Splines of Pump and Shafts.

-----The Pump Drive Shaft has correct alignment.

-----Suction Hose has no leaks or kinks.

Rotary Mower Head:

-----Skid Shoe Bolts are torqued to 120 ft. lbs.

-----Spindle Housing Bolts are torqued to 400 ft. lbs.

-----The Spindle Housing is properly lubricated.

-----Motor Bolts are torqued to 120 ft. lbs.

-----Blade Carrier (Bar) Bolts torque to 400 ft. lbs.

-----Blade Bolts are torqued and the retainings Pins are in place.

-----Blades Swing freely.

Boom:

-----All Hoses tightened and no leaks.

-----All hoses secured to where they will not rub, get pinched or hanging down where they may catch on something.

-----All Decals installed

-----Pump Primed and Pressure adjusted if needed (only applys to Pump for Cylinder control.

Axtreme Boom (Asy. Manl) 07/06

© 2006 Alamo Group Inc.

Section 11 - 2

Image 102
Contents Assembly Manual Page Page To the OWNER/OPERATOR/DEALER Axtreme Boom General Assembly 02-06 Rev Introduction Index Page Axtreme Boom Safety Section LEA EL Instructivo SG-23 Safety Section Safety Section Axtreme Boom Specifications Axtreme Boom Pump SpecificationsFifty Inch 50 Cutting Head Specifications Rotary Head Torque SpecificationSixty Inch 60 Rotary Mower Head Mechanical Remote Cable Controled Valve Standard Controled Valve Optional Valve Sections FunctionHose End Fitting Torque Specification Dash Nominal Cyl Torque Size In. lbs Ft .lbsTractor Preperations General Information / Installation Requirements General InformationLeveling Tractor Replacement Oil Filter Tractor Preparation Tractor, Area Cleanliness Cleaning Boom and mower componets electronicsDo not Weld On This Unit During or After Installation Axtreme Boom Asy. Man 07/06 Axtreme Boom Asy. Man 07/06 Battery Holder Relocation Exhaust / Muffler Relocation Exhaust/Muffler Relocation Fuel Tank Replacement Rear Bracket Bolt Front Under Mount Frame Asy Frame Installation Alamo Group Inc RH Side LH side of tractor Upper Axle strap Counter Weight Installation Turret Assembly Installation Axtreme Boom Asy Man 07/06 Adjust Boom Swing Stop Boom Swing AdjustmentTurret Assembly as seen from the bottom Axtreme Boom Asy. Man 07/06 Wheel Weight Installation Rear Wheel Counter Weight Fill Left Rear Wheel with LiquidInstalling Wheel Weight Axtreme Boom Asy. Man /06 Typical Pump Driveline Hyd Assembly instructions Pump Driveline Hose Removal Pump Driveline Hose InformationPump Driveline Hose Installation PumpPump Driveline Hose Installation Splined Hose Installation Motor Control Valve Block Used with Swivel Head Option Only Cylinder Diverter Valve BlockReturn Oil Cooler with Fan Hyd Schematic Mechanical Operated Std Hyd Schematic Electrically Controlled Opt Axtreme Boom Asy Man 07/06 Boom & Head Installation With Hyd Connections Boom / Head Installation Turret End Boom Boom Mounting Pin Hole Motor Circuit Hoses to Boom Connections Listed as reference Motor Tank Return Orange Tie Blue Tie Red Tie Hydraulic Hose Connections Diverter Valve Controled Valve Motor Return Connecting Hose To Head Hyd Schematic Electrically Controlled Opt Alamo Group Inc Remote Valve Cable Installation On OFF Switch Installation Common ProblemsWire Harness Cable Controled Valve Valve Remote Cable Controls Cylinder Control Valve Cables To Valve SpoolsRemote Cable Operation and Installation Door/Swivel Tilt Dipper Lift Swing Dipper Alamo Industrial Black Wiring Tractor with Remote Cable Cylinder Control Valve Hyd Schematic Mechanical Operated Std Remote Cable Controled Valve Standard 2345672345 22 6Axtreme Boom Joystick Mounting Joystick OptionalJoystick Resister Wiring Harness used With Joystick Valve Controls Only Joystick Installation Ing instructions Make certain these wires have Starter Installing Wire Harness To Valve Plug Function 2345678901234567 Lift Orange/ White Fill Hydraulic Tank Start Up Instructions Fill Hydraulic Tank Fill Hydraulic Tank with OilSuction Hose Axtreme Boom Asy. Man /06 PRE-DELIVERY Inspection Checklist Hydraulic System Saftey EquipmentFrame and Boom Rotary Mower HeadFlail Mower Head Tractor Mower Operation InspectionPost-Operation Inspection Axtreme Boom Asy. Manl 07/06 Page Axtreme Boom Assembly Manual

02984405 specifications

Alamo 02984405 is a significant model in the landscape of modern transportation, particularly known for its robust performance and advanced technology integration. This vehicle is engineered to excel in a variety of environments, from urban settings to rugged terrains, making it a versatile choice for users with diverse needs.

One of the standout features of Alamo 02984405 is its powerful engine, which is designed to deliver impressive horsepower and torque. This allows for dynamic acceleration and remarkable handling, ensuring that drivers can navigate both city streets and off-road paths with ease. Coupled with advanced suspension systems, the vehicle provides a smooth ride while maintaining stability even on challenging surfaces.

In terms of technology, Alamo 02984405 is equipped with an intuitive infotainment system that offers seamless connectivity with smartphones and other devices. The system supports various apps for navigation, entertainment, and communication, ensuring that occupants remain connected while on the move. Additionally, features such as Bluetooth, USB ports, and wireless charging pads enhance convenience and usability.

Safety is a paramount concern in the design of Alamo 02984405. The vehicle integrates multiple advanced safety features, including adaptive cruise control, lane-keeping assist, and automatic emergency braking. These technologies work together to provide a safer driving experience, actively assisting the driver in avoiding potential hazards and accidents.

Moreover, Alamo 02984405 embodies a commitment to sustainability. It incorporates eco-friendly technologies that aim to reduce fuel consumption and emissions. This includes engine efficiency improvements and options for hybrid or electric variations, catering to environmentally conscious consumers.

The interior of Alamo 02984405 is designed with comfort and functionality in mind. It boasts spacious seating and versatile cargo solutions that adapt to different transport needs. High-quality materials are used throughout the cabin, creating a premium feel while ensuring durability.

Lastly, the exterior design of Alamo 02984405 is both stylish and practical, featuring aerodynamic lines that enhance fuel efficiency while asserting a modern aesthetic. Available in various colors and finishes, this vehicle offers personalization options that appeal to a wide range of customers.

In summary, Alamo 02984405 is a well-rounded vehicle that combines performance, technology, safety, and design. With its focus on user experience and environmental responsibility, it stands out as a reliable choice in the competitive automotive market.