Alamo 02984405 instruction manual Turret End Boom Boom Mounting Pin Hole

Page 63

Boom / Head Installation

6.Connect lower end of Lift Cylinder. The Base end (lower end) of lift cylinder will mount into the turret under the boom mount. The Cylinder will have to be extended to connect, If cylinder has to be extended the best way is to unplug the ends of the lift cylinder hoses where they come out of the boom, these will be the # 6 hose with the Orange Tie and the # 6 hose with the orange / White Tie. When pulling (extending or collapsing cylinder) always put the opened end of the hoses into a clean drain pan as oil will run out of the cylinder when extended or collapsed. After installing the cylinder lower mounting pin re-plug the hoses that were in the drain pan until ready to connect hoses.

7.Connect Head to Boom. The mounting pins to in- stall the head onto the boom will be shipped installed in the mount weldment. Remove the mounting pins. Use the hoist to lower boom down over head to connect head, Align the upper head mount pin. The lower mount pin is the connect the lift link. (See Figure 4). The Door Cylinder and the Swivel Cylinder are shipped installed on the head with the hoses connected to the cylinder.

8.Heads Are received from the Factory with the Cylinder and Head hoses Attached to Head. The head will be received with the door cylinder, swivel cylinder and Motor attached to the head. The Hoses for the cylinders and the motor will connect to the boom. There is a decal that is installed on the side of the boom that shows where the hoses connect to the fitting that have the metal caps on them. The fittings for the head are located on the side of the main Boom. The hoses must be connected in the correct order to make certain of correct operation (See Figure 4, 5, 6, 7 & 8).

9.Two Head Options. There are two heads available, 60" (See Figure 4 & 5) which has the head Swivel attach- ment on it. The 50" Head which will not have the swivel attachement (See Figure 6 & 7) If using the 50" head leave the ports for swivel cylinder on boom capped (See Figure 8) More types of heads are tobe made available at a later date.

10.Connect Hose From Boom to Control Valve. The cylinder hoses will connect to the control valve mounted on the front of the tractor with the exception of the Door and Swivel Cylinder hoses they will connect to the diverter valve and then there are two hoses that connect to thediverterr valve to the 6 spool control valve (See Figure 11). The hoses for door and swivel will be routed under the tractor along the center under frame weldment to the diverted valve which will be mounted on the LH side of the tractor on the front frame mount bracket.

Turret End

Of Boom

Boom Mounting

Pin Hole

Figure 3A

Lift Cylinder

Mount Pin

Figure 3B

Figure 3C

Axtreme Boom (Asy. Man) 07/06

© 2006 Alamo Group Inc.

Section 7 - 3

Page 62 Page 64
Image 63
Page 62 Page 64
Contents Assembly Manual Page Page To the OWNER/OPERATOR/DEALER Axtreme Boom General Assembly 02-06 Rev Introduction Index Page Axtreme Boom Safety Section LEA EL Instructivo SG-23 Safety Section Safety Section Axtreme Boom Pump Specifications Specifications Axtreme BoomFifty Inch 50 Cutting Head Specifications Rotary Head Torque SpecificationSixty Inch 60 Rotary Mower Head Mechanical Remote Cable Controled Valve Standard Valve Sections Function Controled Valve OptionalDash Nominal Cyl Torque Size In. lbs Ft .lbs Hose End Fitting Torque SpecificationTractor Preperations General Information General Information / Installation RequirementsLeveling Tractor Replacement Oil Filter Tractor Preparation Cleaning Boom and mower componets electronics Tractor, Area CleanlinessDo not Weld On This Unit During or After Installation Axtreme Boom Asy. Man 07/06 Axtreme Boom Asy. Man 07/06 Battery Holder Relocation Exhaust / Muffler Relocation Exhaust/Muffler Relocation Fuel Tank Replacement Rear Bracket Bolt Front Under Mount Frame Asy Frame Installation Alamo Group Inc RH Side LH side of tractor Upper Axle strap Counter Weight Installation Turret Assembly Installation Axtreme Boom Asy Man 07/06 Boom Swing Adjustment Adjust Boom Swing StopTurret Assembly as seen from the bottom Axtreme Boom Asy. Man 07/06 Wheel Weight Installation Fill Left Rear Wheel with Liquid Rear Wheel Counter WeightInstalling Wheel Weight Axtreme Boom Asy. Man /06 Typical Pump Driveline Hyd Assembly instructions Pump Driveline Hose Information Pump Driveline Hose RemovalPump Pump Driveline Hose InstallationPump Driveline Hose Installation Splined Hose Installation Motor Control Valve Block Cylinder Diverter Valve Block Used with Swivel Head Option OnlyReturn Oil Cooler with Fan Hyd Schematic Mechanical Operated Std Hyd Schematic Electrically Controlled Opt Axtreme Boom Asy Man 07/06 Boom & Head Installation With Hyd Connections Boom / Head Installation Turret End Boom Boom Mounting Pin Hole Motor Circuit Hoses to Boom Connections Listed as reference Motor Tank Return Orange Tie Blue Tie Red Tie Hydraulic Hose Connections Diverter Valve Controled Valve Motor Return Connecting Hose To Head Hyd Schematic Electrically Controlled Opt Alamo Group Inc Remote Valve Cable Installation Common Problems On OFF Switch InstallationWire Harness Cable Controled Valve Cylinder Control Valve Cables To Valve Spools Valve Remote Cable ControlsRemote Cable Operation and Installation Door/Swivel Tilt Dipper Lift Swing Dipper Alamo Industrial Black Wiring Tractor with Remote Cable Cylinder Control Valve Hyd Schematic Mechanical Operated Std 2345672345 22 6 Remote Cable Controled Valve StandardAxtreme Boom Joystick Optional Joystick MountingJoystick Resister Wiring Harness used With Joystick Valve Controls Only Joystick Installation Ing instructions Make certain these wires have Starter Installing Wire Harness To Valve Plug Function 2345678901234567 Lift Orange/ White Fill Hydraulic Tank Start Up Instructions Fill Hydraulic Tank with Oil Fill Hydraulic TankSuction Hose Axtreme Boom Asy. Man /06 PRE-DELIVERY Inspection Checklist Rotary Mower Head Saftey EquipmentFrame and Boom Hydraulic SystemFlail Mower Head Tractor Mower Operation InspectionPost-Operation Inspection Axtreme Boom Asy. Manl 07/06 Page Axtreme Boom Assembly Manual

02984405 specifications

Alamo 02984405 is a significant model in the landscape of modern transportation, particularly known for its robust performance and advanced technology integration. This vehicle is engineered to excel in a variety of environments, from urban settings to rugged terrains, making it a versatile choice for users with diverse needs.

One of the standout features of Alamo 02984405 is its powerful engine, which is designed to deliver impressive horsepower and torque. This allows for dynamic acceleration and remarkable handling, ensuring that drivers can navigate both city streets and off-road paths with ease. Coupled with advanced suspension systems, the vehicle provides a smooth ride while maintaining stability even on challenging surfaces.

In terms of technology, Alamo 02984405 is equipped with an intuitive infotainment system that offers seamless connectivity with smartphones and other devices. The system supports various apps for navigation, entertainment, and communication, ensuring that occupants remain connected while on the move. Additionally, features such as Bluetooth, USB ports, and wireless charging pads enhance convenience and usability.

Safety is a paramount concern in the design of Alamo 02984405. The vehicle integrates multiple advanced safety features, including adaptive cruise control, lane-keeping assist, and automatic emergency braking. These technologies work together to provide a safer driving experience, actively assisting the driver in avoiding potential hazards and accidents.

Moreover, Alamo 02984405 embodies a commitment to sustainability. It incorporates eco-friendly technologies that aim to reduce fuel consumption and emissions. This includes engine efficiency improvements and options for hybrid or electric variations, catering to environmentally conscious consumers.

The interior of Alamo 02984405 is designed with comfort and functionality in mind. It boasts spacious seating and versatile cargo solutions that adapt to different transport needs. High-quality materials are used throughout the cabin, creating a premium feel while ensuring durability.

Lastly, the exterior design of Alamo 02984405 is both stylish and practical, featuring aerodynamic lines that enhance fuel efficiency while asserting a modern aesthetic. Available in various colors and finishes, this vehicle offers personalization options that appeal to a wide range of customers.

In summary, Alamo 02984405 is a well-rounded vehicle that combines performance, technology, safety, and design. With its focus on user experience and environmental responsibility, it stands out as a reliable choice in the competitive automotive market.
Top Page Image Contents