Pump Driveline Hose Installation | Alamo 02984405 instruction

Pump - Driveline - Hose Removal

Clamp Yoke &

Tube End

Pump Pressure Ports (large port to motor, small port to cyl con- trol valve supply

Pulley Adpater Use Bolts & Washers (4 ea.)	Tractor Engine Pulley

Time Universal Joints

Driveline Asy

Flange Yoke & Shaft End

Driveline Mounting Bolts

Pump Mount Bolts & Washer (4)

Pump 234567890

Suction
Port	Pump Mount
	Pump Mount
	Bolts & Washer

Figure 2

23456

Pump Mount23Plate

Bolts To Tractor

Bolster

Pump - Driveline - Hose Installation:

1.Install Pulley Adapter. The Pulley adapter is a round plate with 4 threaded holes and four non-threaded holes in it. The Non-threaded holes are used to mount the Adapter to the Pulley using 4 bolts & Lockwasher. Do not use longer bolts to mount Pulley Adapter to Pulley than is supplied with mounting kit. (See Figure 2)

2.Driveshaft Assembly. Some tractor models may have to have a hole cut in the front for the driveshaft to go into. If this is needed most tractors will have a (dimple) mark in the front to indicated the center point of the engine crankshaft. A hole of sufficient size will need to be cut, in most cases a 1-1/2" to 2" dia. hole will work. The drive shaft is a two piece Assembly, an inner and outer shaft assembly (See Figure 2 & 3). The Shaft End has a four bolt flange yokes on it that connect to the Crankshaft Pulley Adapter. The Tube end has a splined clamp yoke on it that connects to the Pump. This Drive Shaft connects to the Pulley Adapter. Note that the Universals of the Driveshaft are in time. When installed in tractor they should be in time as shown, both Yokes the same direction (See Figure 2 & 3).

3.Install Shaft End of Driveshaft / Engine end. Install the Shaft 1/2 Assembly w/ Flanged Yoke into the Engine compartment of Tractor, install it from the LH front Side down and under radiator. (See Figure 4). This needs to be installed this way because the Flange Yoke will not go through the Crankshaft access hole in the front of the Tractor. Bolt the Flange Yoke to the Pulley Adapter using the four Bolts and Lock Washers, put Locktite on the threads of the Bolts when installing them into Pulley Adapter. To Tighten these four Bolts, use a long extension and go through the front Crankshaft Pulley access hole in front of Tractor if you cannot tighten them from the side. Do Not use bolts longer than the mount kit calls for, longer bolts will damage Crankshaft Pulley if they go completely through the adapter.

Axtreme Boom (Asy Man) 07/06

Section 6 - 3

02984405 specifications

Alamo 02984405 is a significant model in the landscape of modern transportation, particularly known for its robust performance and advanced technology integration. This vehicle is engineered to excel in a variety of environments, from urban settings to rugged terrains, making it a versatile choice for users with diverse needs.

One of the standout features of Alamo 02984405 is its powerful engine, which is designed to deliver impressive horsepower and torque. This allows for dynamic acceleration and remarkable handling, ensuring that drivers can navigate both city streets and off-road paths with ease. Coupled with advanced suspension systems, the vehicle provides a smooth ride while maintaining stability even on challenging surfaces.

In terms of technology, Alamo 02984405 is equipped with an intuitive infotainment system that offers seamless connectivity with smartphones and other devices. The system supports various apps for navigation, entertainment, and communication, ensuring that occupants remain connected while on the move. Additionally, features such as Bluetooth, USB ports, and wireless charging pads enhance convenience and usability.

Safety is a paramount concern in the design of Alamo 02984405. The vehicle integrates multiple advanced safety features, including adaptive cruise control, lane-keeping assist, and automatic emergency braking. These technologies work together to provide a safer driving experience, actively assisting the driver in avoiding potential hazards and accidents.

Moreover, Alamo 02984405 embodies a commitment to sustainability. It incorporates eco-friendly technologies that aim to reduce fuel consumption and emissions. This includes engine efficiency improvements and options for hybrid or electric variations, catering to environmentally conscious consumers.

The interior of Alamo 02984405 is designed with comfort and functionality in mind. It boasts spacious seating and versatile cargo solutions that adapt to different transport needs. High-quality materials are used throughout the cabin, creating a premium feel while ensuring durability.

Lastly, the exterior design of Alamo 02984405 is both stylish and practical, featuring aerodynamic lines that enhance fuel efficiency while asserting a modern aesthetic. Available in various colors and finishes, this vehicle offers personalization options that appeal to a wide range of customers.

In summary, Alamo 02984405 is a well-rounded vehicle that combines performance, technology, safety, and design. With its focus on user experience and environmental responsibility, it stands out as a reliable choice in the competitive automotive market.