Pump Driveline Hose Installation | Alamo 02984405 specification

Pump - Driveline - Hose Installation

4.Driveline timeing means the universal joints are both the same position when driveline half is slid together. If they are not timed, it will decrease the life of the universal joint and in some cases could cause a vibration. (See Figure

2& 3), Driveline timing is critical to smooth operation.

5.Install Tube End of Driveline / Pump End. Slide the Tube half of driveshaft through Pump Mount Plate and Tractor Crankshaft Access Hole (See Figure 8). You will have to align the Universals when doing this (time the Driveshaft). Slide the two together where the Universal are in time (See Figure 2, 3 & 5) this will help the driveshaft to operate smoothly.

6.Loosen Splined Clamp Yoke. Insert a bar through the Yoke to hold Driveshaft up and to help loosen the Bolts in the clamp Yoke (See Figure 6). This can be loosened with a hand Wrench or a Socket whichever is easier (See Figure 6). Sometimes it is easier to test fit the Tube End of Driveshaft to the Pump while the Pump is on the bench, But this make timing the driveline yokes more difficult.

7.Install Pump into Splined Clamp Yoke. Coat the Pump Splined Shaft with Anti-Sieze Compound. Slide the Pump Splined Shaft into the Spline Clamp Yoke (See Figure 8). Leave the Bar stuck in through the Yoke as shown, this helps to stabilize the Yoke as you slide Pump Shaft into the Yoke. Once Pump is slid into the Splined Yoke, keep the Pump supported; DO NOT let the Pump hang on the Yoke unsupported.

8.Pump / Driveshaft Yoke Gap Adjustment. After sliding Pump Shaft into Splined Clamp Yoke, the Pump and Yoke must be slid apart far enough to allow for a 1/16" to 1/8" Gap between them. The Yoke edge cannot touch the Pump Housing; it will damage the Housing and the Yoke if it does. This is a very critical adjustment (See

Figure 9).

Splined Clamp Yoke

/ Tube EndFlange Yoke

/ Shaft End

			Drive Shaft
			Assembly
	Figure 3		Assembly
	Figure 3


	Shaft 1/2 Assembly
	w/ Flanged Yoke
	Tractor		Tractor Engine
	Radiator		Tractor Engine

	Left Hand front side
Figure 4	of Tractor

	Tube End of
	Driveshaft
		Typical
	Splined	Pump
	Splined	Mount
	Clamp Yoke	Mount
	Clamp Yoke	Plate
		Plate
	Figure 5	Shown
	Figure 5

Bar to Hold

Drive Shaft

Driveshaft, Spline Clamp Yoke End

Figure 6

Axtreme Boom (Asy Man) 07/06

Section 6 - 4

02984405 specifications

Alamo 02984405 is a significant model in the landscape of modern transportation, particularly known for its robust performance and advanced technology integration. This vehicle is engineered to excel in a variety of environments, from urban settings to rugged terrains, making it a versatile choice for users with diverse needs.

One of the standout features of Alamo 02984405 is its powerful engine, which is designed to deliver impressive horsepower and torque. This allows for dynamic acceleration and remarkable handling, ensuring that drivers can navigate both city streets and off-road paths with ease. Coupled with advanced suspension systems, the vehicle provides a smooth ride while maintaining stability even on challenging surfaces.

In terms of technology, Alamo 02984405 is equipped with an intuitive infotainment system that offers seamless connectivity with smartphones and other devices. The system supports various apps for navigation, entertainment, and communication, ensuring that occupants remain connected while on the move. Additionally, features such as Bluetooth, USB ports, and wireless charging pads enhance convenience and usability.

Safety is a paramount concern in the design of Alamo 02984405. The vehicle integrates multiple advanced safety features, including adaptive cruise control, lane-keeping assist, and automatic emergency braking. These technologies work together to provide a safer driving experience, actively assisting the driver in avoiding potential hazards and accidents.

Moreover, Alamo 02984405 embodies a commitment to sustainability. It incorporates eco-friendly technologies that aim to reduce fuel consumption and emissions. This includes engine efficiency improvements and options for hybrid or electric variations, catering to environmentally conscious consumers.

The interior of Alamo 02984405 is designed with comfort and functionality in mind. It boasts spacious seating and versatile cargo solutions that adapt to different transport needs. High-quality materials are used throughout the cabin, creating a premium feel while ensuring durability.

Lastly, the exterior design of Alamo 02984405 is both stylish and practical, featuring aerodynamic lines that enhance fuel efficiency while asserting a modern aesthetic. Available in various colors and finishes, this vehicle offers personalization options that appeal to a wide range of customers.

In summary, Alamo 02984405 is a well-rounded vehicle that combines performance, technology, safety, and design. With its focus on user experience and environmental responsibility, it stands out as a reliable choice in the competitive automotive market.