14
Operating SpaYour
Setting Filtration Cycles
Your spa is programmed to filter twice a day. The first cycle will begin six minutes after the spa is turned on and the second cycle 12 hours later. The factory has programmed the cycle to last for two hours but this can be reset according on your requirements.
To set the length of filtration cycles, press the Temp button then the Jets button. Press Temp button again to change the filtering cycle duration. When desired duration is selected press the Jets button to exit.
F2 | Two hours |
F4 | Four hours |
F6 | Six hours |
F8 | Eight hours |
FC | Continuous filtration |
To set the time of day filtration begins, turn off the power to the spa at the time you would like one of the filtration cycles to begin, then turn back on after 30 seconds.
If you have an ozonator, it will activate during the filtration cycles.
Circulation Pump
This is an optional feature. If you have the optional circulation pump, it will come on when the system is checking temperature, during filter cycles, during freeze conditions, or when another pump is on.
When the circulation pump is installed, pump 1 is
7for control box settings.)
9800 Electronic Control
Temperature Adjustment
(Range 80°F to 104°F, 26°C to 40°C)
The electronic control panel displays the actual water temperature in degrees Fahrenheit. The displayed temperature will only be current after the pump has been running for at least two minutes.
To display the temperature that the spa is set to:
•Press the Temp button. The temperature setting will flash.
•While the display is flashing, each time you press Temp button, the set temperature will change up or down one degree.
•If the desired temperature is opposite of the direction each press of the button is making, release button, allow display to stop flashing and then press Temp button to change temperature the other direction.
Light
Press the Light button to turn on the light. Press it once again to turn the light off. All optional lighting such as the control panel light and cabinet perimeter lighting is controlled by the Light button and will turn on and off with the spa light.
Automatic Time outs
These features will automatically turn themselves off during periods of continuous use:
• | Low speed pump | After 4 hours |
• | High speed pumps | After 15 minutes |
• | Optional circulation pump | After 15 minutes |
• | Optional turbo | After 15 minutes |
• | Spa light | After 4 hours |
2011 Portable Spa
www.calspas.com | LTR20111000, Rev. D |