Exmark Lazer ZHP manual Potential Hazard

Page 2

WARNING

POTENTIAL HAZARD

♦This product is a piece of power equipment.

WHAT CAN HAPPEN

♦Failure to follow safe operating practices can result in serious operator injury or even death.

HOW TO AVOID THE HAZARD

♦Keep all shields, guards, and safety devices (especially the grass discharge system) in place and in proper working condition.

♦Stop engine and wait for all moving parts to stop. Remove spark plug wire(s) or remove key before adjusting, servicing, or performing maintenance.

♦If mower deck becomes clogged, stop engine and wait for all moving parts to stop. Remove spark plug wire(s) or remove key before cleaning blockage.

♦Keep hands, feet, and clothing away from power driven parts.

♦Keep off mower unless seat platform is provided.

♦Keep others off mower.

WARNING

POTENTIAL HAZARD

♦Gasoline is harmful or fatal if swallowed. Long-term exposure to vapors has caused cancer in laboratory animals.

WHAT CAN HAPPEN

♦Failure to use caution may cause serious injury or illness.

HOW TO AVOID THE HAZARD

♦Avoid prolonged breathing of vapors.

♦Keep face away from nozzle and gas tank/container opening.

♦Keep away from eyes and skin.

♦Never siphon by mouth.

IMPORTANT

When the mower is used or operated on any California forest, brush or grass covered land, a working spark arrester must be attached to the muffler. If not, the operator is violating state law, Section 4442 Public Resource Code. To acquire a spark arrester for your unit, see your Engine Service Dealer.

This spark ignition system complies with Canadian ICES-002

Ce système d’allumage par ètincelle de vèhicule est conforme à la norme NMB-002 du Canada

The enclosed Engine Owner’s Manual is supplied for information regarding The U.S. Environmental Protection Agency (EPA) and the California Emission Control Regulation of emission systems, maintenance and warranty.

Keep this engine Owner’s Manual with your unit. Should this engine Owner’s Manual become damaged or illegible, replace immediately. Replacements may be ordered through the engine manufacturer.

Exmark reserves the right to make changes or add improvements to its products at any time without incurring any obligation to make such changes to products manufactured previously. Exmark, or its distributors and dealers, accept no responsibility for variations which may be evident in the actual specifications of its products and the statements and descriptions contained in this publication.

i

Page 1 Page 3
Image 2
Page 1 Page 3
Contents For Serial Nos 540,000 & Higher Potential Hazard Exmark Parts PLUS→ Program Operators Manual Table of Contents Safety Alert Symbol SafetyYour Safety is Involved TrainingCarbon monoxide can kill you Potential Hazard Operation Safe Zone for Mowing There is no rollover protection when the roll bar is down Maintenance and Storage Safety Signs Page Engine SpecificationsModel Number Operator Controls Fuel SystemElectrical System Cutting Deck Hydrostatic Ground Drive SystemTires and Wheels Uncrate Mower Install Rollover Protection System Roll BAR Assembly InstructionsDimensions Curb WeightLower Roll BAR Installation Machine is shipped with a filled lead acid battery Service BatteryUpper Roll BAR Installation Check Tire Pressure Install Drive WheelsInstall Seat Position Discharge Chute Install Motion Control LeversService Engine Control ARM ShaftControls Service Hydraulic OILOperation Instructions Motion Control PositionsPush the lever forward and down to disengage the brake PRE-START MowingStarting Engine Transporting Service Interval Daily Maintenance & AdjustmentsPeriodic Maintenance Service Interval Daily or more often in dry conditions Service Interval MonthlyBlade Bolt Installation Check rollover protections systems roll bar pins Service Interval 100 hrs Service Interval 40 hrService Interval Refer to chart Lubrication ChartService Interval 40 hrs Service Interval 160 hrs Service Interval Once YearlyCaster Wheel Assembly Service Interval After First 250 hrs Then yearly thereafter Service Interval 80 hrsService Interval As Required Page Adjustments Cutting Height PositionANTI-SCALP Roller Adjustment Swivel Adjustment Spring Compression Adjustment Throttle Tension Brake AdjustmentNo adjustment necessary Potential Hazard RH Motion Control Adjustment LH Motion Control AdjustmentWaste Disposal Battery DisposalCaster Adjustment Motor OIL DisposalMower Cuts Unevenly Trouble ShootingMower Pulls Left or Right W/LEVERS Fully Forward Engine will not StartEngine Troubleshooting Table ProblemElectrical Diagram Kawasaki Units Electrical Diagram Kohler Units Hydraulic Diagram Year Limited Warranty Service Record Page See EXMARK’S Complete Line of Accessories

Lazer ZHP specifications

The Exmark Lazer ZHP is a professional-grade zero-turn mower designed to deliver unparalleled performance and efficiency for commercial landscaping and maintenance. Recognized for its durability and innovative features, the Lazer ZHP series has become a preferred choice for professionals seeking precision and reliability in their mowing equipment.

One of the standout features of the Exmark Lazer ZHP is its powerful engine options, which typically include models from trusted manufacturers such as Kohler and Kawasaki. These engines are designed to provide robust performance while ensuring fuel efficiency, allowing operators to cover large areas without frequent refueling. The Lazer ZHP also boasts a high-capacity fuel tank, enhancing productivity by minimizing downtime due to refueling.

The mower’s cutting deck is another key highlight, with options typically ranging from 48 to 72 inches in size. The Exmark patented UltraCut deck technology provides an exceptional cut quality, ensuring that grass is finely mulched and evenly distributed. This not only enhances the visual appeal of the lawn but also contributes to overall lawn health by returning valuable nutrients to the soil.

In terms of comfort and ergonomics, the Lazer ZHP is built with the operator in mind. The spacious operator platform is designed to reduce fatigue during long hours of operation. The mower features an adjustable seat with premium cushioning, and the controls are intuitively positioned for easy access. The ergonomic design enhances maneuverability, allowing the operator to navigate tight spaces and obstacles with ease.

Technologically, the Exmark Lazer ZHP incorporates advanced features such as the Exmark patented IS (Independent Suspension) system. This technology enhances ride quality and stability, reducing the impact of uneven terrain on the operator and improving cut quality. Additionally, the mower is equipped with a sophisticated hydrostatic transmission, allowing for seamless speed and directional changes that enhance control and precision.

Another notable characteristic of the Lazer ZHP is its rugged construction, designed to withstand the rigors of commercial use. The welded steel frame and heavy-duty components are engineered to provide long-lasting performance and reliability, even in the most challenging conditions. The durable design not only enhances the mower’s lifespan but also reduces maintenance costs over time.

In summary, the Exmark Lazer ZHP stands out in the market for its combination of power, technology, and durability. With features that cater specifically to the needs of professional landscapers, this mower promises exceptional results and a superior mowing experience, making it an essential addition to any landscaping fleet.
Top Page Image Contents