Exmark Lazer ZHP manual Potential Hazard

Page 8

DANGER

POTENTIAL HAZARD

♦In certain conditions gasoline is extremely flammable and highly explosive.

WHAT CAN HAPPEN

♦A static charge can ignite gasoline vapors. A fire or explosion from gasoline can burn you, others, and cause property damage.

HOW TO AVOID THE HAZARD

♦Purchase and store gasoline only in an approved container.

♦Always place gasoline containers on the ground away from your vehicle before filling.

♦Do not fill gasoline containers inside a vehicle or on a truck or trailer bed because interior carpets or plastic truck bed liners may insulate the container and slow the loss of any static charge.

♦When practical, remove gas-powered equipment from the truck or trailer and refuel the equipment with its wheels on the ground.

♦If this is not possible, then refuel such equipment on a truck or trailer from a portable container, rather than from a gasoline dispenser nozzle.

♦If a gasoline dispenser nozzle must be used, keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete.

WARNING

POTENTIAL HAZARD

♦Gasoline vapor can collect inside enclosed trailers and may be ignited by electrical sparks or hot engine/exhaust components.

WHAT CAN HAPPEN

♦Explosion and fire may occur, resulting in property damage, personal injury, and/or death.

HOW TO AVOID THE HAZARD

♦Provide adequate ventilation of any enclosed trailer to prevent build up of gasoline vapors, especially at floor level.

♦Refuel only outdoors, never inside an enclosed trailer.

♦Be sure all fuel tanks and gasoline storage containers have proper caps installed to prevent spillage and minimize vapor escaping into the trailer.

♦Do not place any equipment that is leaking gasoline in an enclosed trailer.

-3 -

Page 7 Page 9
Image 8
Page 7 Page 9
Contents For Serial Nos 540,000 & Higher Potential Hazard Exmark Parts PLUS→ Program Operators Manual Table of Contents Safety Your Safety is InvolvedSafety Alert Symbol TrainingCarbon monoxide can kill you Potential Hazard Operation Safe Zone for Mowing There is no rollover protection when the roll bar is down Maintenance and Storage Safety Signs Page Engine SpecificationsModel Number Operator Controls Fuel SystemElectrical System Cutting Deck Hydrostatic Ground Drive SystemTires and Wheels Assembly Instructions DimensionsUncrate Mower Install Rollover Protection System Roll BAR Curb WeightLower Roll BAR Installation Machine is shipped with a filled lead acid battery Service BatteryUpper Roll BAR Installation Check Tire Pressure Install Drive WheelsInstall Seat Install Motion Control Levers Service EnginePosition Discharge Chute Control ARM ShaftService Hydraulic OIL Operation InstructionsControls Motion Control PositionsPush the lever forward and down to disengage the brake PRE-START MowingStarting Engine Transporting Service Interval Daily Maintenance & AdjustmentsPeriodic Maintenance Service Interval Daily or more often in dry conditions Service Interval MonthlyBlade Bolt Installation Check rollover protections systems roll bar pins Service Interval 100 hrs Service Interval 40 hrService Interval Refer to chart Lubrication ChartService Interval 40 hrs Service Interval 160 hrs Service Interval Once YearlyCaster Wheel Assembly Service Interval After First 250 hrs Then yearly thereafter Service Interval 80 hrsService Interval As Required Page Adjustments Cutting Height PositionANTI-SCALP Roller Adjustment Swivel Adjustment Spring Compression Adjustment Throttle Tension Brake AdjustmentNo adjustment necessary Potential Hazard RH Motion Control Adjustment LH Motion Control AdjustmentBattery Disposal Caster AdjustmentWaste Disposal Motor OIL DisposalTrouble Shooting Mower Pulls Left or Right W/LEVERS Fully ForwardMower Cuts Unevenly Engine will not StartEngine Troubleshooting Table ProblemElectrical Diagram Kawasaki Units Electrical Diagram Kohler Units Hydraulic Diagram Year Limited Warranty Service Record Page See EXMARK’S Complete Line of Accessories

Lazer ZHP specifications

The Exmark Lazer ZHP is a professional-grade zero-turn mower designed to deliver unparalleled performance and efficiency for commercial landscaping and maintenance. Recognized for its durability and innovative features, the Lazer ZHP series has become a preferred choice for professionals seeking precision and reliability in their mowing equipment.

One of the standout features of the Exmark Lazer ZHP is its powerful engine options, which typically include models from trusted manufacturers such as Kohler and Kawasaki. These engines are designed to provide robust performance while ensuring fuel efficiency, allowing operators to cover large areas without frequent refueling. The Lazer ZHP also boasts a high-capacity fuel tank, enhancing productivity by minimizing downtime due to refueling.

The mower’s cutting deck is another key highlight, with options typically ranging from 48 to 72 inches in size. The Exmark patented UltraCut deck technology provides an exceptional cut quality, ensuring that grass is finely mulched and evenly distributed. This not only enhances the visual appeal of the lawn but also contributes to overall lawn health by returning valuable nutrients to the soil.

In terms of comfort and ergonomics, the Lazer ZHP is built with the operator in mind. The spacious operator platform is designed to reduce fatigue during long hours of operation. The mower features an adjustable seat with premium cushioning, and the controls are intuitively positioned for easy access. The ergonomic design enhances maneuverability, allowing the operator to navigate tight spaces and obstacles with ease.

Technologically, the Exmark Lazer ZHP incorporates advanced features such as the Exmark patented IS (Independent Suspension) system. This technology enhances ride quality and stability, reducing the impact of uneven terrain on the operator and improving cut quality. Additionally, the mower is equipped with a sophisticated hydrostatic transmission, allowing for seamless speed and directional changes that enhance control and precision.

Another notable characteristic of the Lazer ZHP is its rugged construction, designed to withstand the rigors of commercial use. The welded steel frame and heavy-duty components are engineered to provide long-lasting performance and reliability, even in the most challenging conditions. The durable design not only enhances the mower’s lifespan but also reduces maintenance costs over time.

In summary, the Exmark Lazer ZHP stands out in the market for its combination of power, technology, and durability. With features that cater specifically to the needs of professional landscapers, this mower promises exceptional results and a superior mowing experience, making it an essential addition to any landscaping fleet.
Top Page Image Contents