Exmark 4500-540 Rev. B manual Slope Operation

Page 7

Safety

Operation

WARNING

Operating engine parts, especially the muffler, become extremely hot. Severe burns can occur on contact and debris, such as leaves, grass, brush, etc. can catch fire.

Allow engine parts, especially the muffler, to cool before touching.

Remove accumulated debris from muffler and engine area.

Install and maintain in working order a spark arrester before using equipment on forest-covered, grass-covered, or brush-covered unimproved land.

WARNING

Engine exhaust contains carbon monoxide, which is an odorless deadly poison that can kill you.

Do Not run engine indoors or in a small confined area where dangerous carbon monoxide fumes can collect.

Operate only in daylight or good artificial light, keeping away from holes and hidden hazards.

Be sure all drives are in neutral and parking brake is engaged before starting engine.

Never raise deck with blades running.

Never operate the mower with damaged guards, shields, or covers. Always have safety shields, guards, switches and other devices in place and in proper working condition.

Never mow with the discharge deflector raised, removed or altered unless there is a grass collection system or mulch kit in place and working properly.

Do Not change the engine governor setting or overspeed the engine.

Stop engine, wait for all moving parts to stop, remove key and engage parking brake:

Before checking, cleaning or working on the mower.

After striking a foreign object or abnormal vibration occurs (inspect the mower for

damage and make repairs before restarting and operating the mower).

Before clearing blockages.

Whenever you leave the mower.

Stop engine, wait for all moving parts to stop, and engage parking brake:

Before refueling.

Before dumping the grass catcher.

Before making height adjustments.

WARNING

Hands, feet, hair, clothing, or accessories can become entangled in rotating parts. Contact with the rotating parts can cause traumatic amputation or severe lacerations.

Do Not operate the machine without guards, shields, and safety devices in place and working properly.

Keep hands, feet, hair, jewelry, or clothing away from rotating parts.

DO NOT operate the mower when people, especially children, or pets are in the area.

Be alert, slow down and use caution when making turns. Look behind and to the side before changing directions.

Stop the blades, slow down, and use caution when crossing surfaces other than grass and when transporting the mower to and from the area to be mowed.

Be aware of the mower discharge path and direct discharge away from others.

Do Not operate the mower under the influence of alcohol or drugs.

Use extreme care when loading or unloading the machine into a trailer or truck.

Use care when approaching blind corners, shrubs, trees, or other objects that may obscure vision.

Slope Operation

Use Extreme caution when mowing and/or turning on slopes as loss of traction and/or tip-over could occur. The operator is responsible for safe operation on slopes.

7

Image 7
Contents Turf Tracer HP California Introduction Contents Training SafetySafety Alert Symbol Safe Operating PracticesSafety Slope Operation OperationMaintenance and Storage Safety Safety and Instructional Decals 413327 103-1977 109-3148 116-0404 117-2718 Model Numbers SpecificationsSystems Dimensions Torque Requirements Product OverviewControls OperationPark Brake Lever Off-Run Switch Manual Start OnlyIgnition Switch Electric Start Only Tracking Adjustment KnobStarting the Engine Manual Start Pre-StartOperating Instructions Open the Fuel Shut-Off ValveDrive Lever/Neutral Lock Latch Operation Disengaging the PTOStopping the Engine Driving the MachineDriving Forward Adjusting the Cutting HeightDriving in Reverse Adjusting the Anti-Scalp Rollers Transporting a Unit TransportingRecommended Maintenance Schedules MaintenanceCheck Engine Oil Level Check Battery Charge Electric Start Units OnlyProposition 65 Warning Do Not jump start a weak battery if these conditions exist Service Interval As requiredCheck Mower Blades Install bushing/blade assembly into spindleReplacing the Discharge Deflector Service Air Cleaner Check Safety Interlock SystemCheck for Loose Hardware Check Condition Of Belts Change Engine OilCheck Hydraulic Oil Level Check Tire PressuresLevel Check Spark PlugsChange Fuel Filter Change Hydraulic System FilterHydraulic System Air Purge Inspect PTO Clutching Belt Tension Wheel Hub-Slotted Nut Torque SpecificationThread Locking Adhesives Deck Leveling Park Brake AdjustmentHydro Drive Linkage Adjustment Mobil HTS Grease Or Food-Grade Anti-seizeAdjust Hydro Control Linkages Adjust Neutral Control LinkagesDrive Lever Linkage Adjustment Retighten PTO switch mounting hardware Tracking AdjustmentHydro Pump Spring Tension Setting PTO Safety SwitchClean Grass Build-Up Under Deck Clean Engine and Exhaust System AreaRemove Engine Shrouds and Clean Cooling Fins Clean Debris From MachineMaintenance Problem Possible Cause Corrective Action TroubleshootingTroubleshooting Electrical Diagram SchematicsHydraulic Diagram Exmark Commercial Turf Equipment Page Date Description of Work Done Service Done By Service RecordPage This page may be copied for personal use See EXMARK’S Complete Line of Accessories and Options