Husqvarna YTH135 instruction manual IV. Maintenance and Storage

IV. Maintenance and Storage

•Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition.

•Never store the equipment with petrol in the tank inside a building where fumes may reach an open flame or spark.

•Allow the engine to cool before storing in any enclo- sure.

•To reduce the fire hazard, keep the engine, silencer, battery compartment and petrol storage area free of grass, leaves, or excessive grease.

•Check the grass catcher frequently for wear or deterio- ration.

•Replace worn or damaged parts for safety.

•If the fuel tank has to be drained, this should be done outdoors.

•On multi-bladed machines, take care as rotating one blade can cause other blades to rotate.

•When machine is to be parked, stored or left unat- tended, lower the cutting means unless a positive mechanical lock is used.

CAUTION: Always disconnect spark plug wire and place wire where it cannot contact spark plug in order to prevent accidental starting when setting up, transporting, adjusting or making repairs.

4